SR ISO 5454-1995 Ferrotitanium - Specification and conditions of delivery《钛铁 规范和交货条件》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D792-A-2011 ABS MOLDING COMPOUND HIGH HEAT RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《耐高温丙烯腈模塑材料 与福特WSS-M99P1111-A 一起使用[使用 福特WSS-M4D792-B1]》.pdf

FORD WSK-M4D792-A2-2011 ABS HIGH HEAT RESISTANT MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部耐高温丙烯腈模塑材料 与福特WSS-M99P1111-A 一起使用[使用 福特WSS-M4D792-B1]》.pdf

FORD WSK-M4D792-A3-2008 ABS HIGH HEAT RESISTANT MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用耐高温丙烯腈-丁二烯-苯乙烯共聚物(ABS)成型料 与标准FORD WSS-M99P1111-A一起使用 [使用 FOR.pdf

FORD WSK-M4D793-A-2010 ACETAL (POM) COPOPOLYMER 26% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《26%玻璃纤维增强的乙缩醛共聚物（POM）成型料 与标准FORD WSS-M99P1111-A一.pdf

FORD WSK-M4D794-A-2006 POLYAMIDE (PA) 66 HEAT STABILIZED IMPACT MODIFIED BLOW MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D666-A)《受热稳定的冲击改性聚酰胺66吹塑成型料 与标准FORD.pdf

FORD WSK-M4D795-A-2010 POLYAMIDE 66 (PA66) HEAT STABILIZED MOLYBDENUM DISULFIDE FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《二硫化钼填充的聚酰胺66受热稳定的成型料 与标准FORD WSS-M99.pdf

FORD WSK-M4D796-A1-2010 POLYCARBONATE (PC) MODIFIED HIGH HEAT RESISTANT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《改良的耐高温聚碳酸酯(PC)模塑材料 与福特WSS-M99P1111-A 一起使用[使用 福特WSS.pdf

FORD WSK-M4D796-A2-2010 POLYCARBONATE (PC) MODIFIED HIGH HEAT RESISTANT MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《改良的耐高温聚碳酸酯(PC)模塑材料 与福特WSS-M99P1111-A 一起使用.pdf

FORD WSK-M4D797-A-2010 POLYCARBONATE (PC) 22% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《22%玻璃纤维增强聚碳酸酯(PC)模塑材料 与福特WSS-M99P1111-A 一起使用[使用 福特WSS.pdf