SS 311-1994 Specification for steel tubes and fittings used in tubular scaffolding《脚手架上使用的钢管及配件的规范》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 15510-1970 Removable nut stops with joint pin for boring bars and boring arbors Design《钻杆和钻轴用带连接销的移动式防松螺母 设计》.pdf

GOST 15511-1970 Back nuts for boring bars and boring arbors Design《钻杆和钻轴用支承螺母 设计》.pdf

GOST 15512-1970 Stop washer with inner joggle for boring bars Design《镗杆用带内凸缘止动垫圈 结构》.pdf

GOST 15513-1970 Pin joint for removable nut stops on boring bars and boring arbors Dimensions《镗杆和钻杆的可换螺母用紧锁销 尺寸》.pdf

GOST 15514-1970 Nut stops for boring bars and boring arbors Design《钻杆和钻轴用防松螺母 设计》.pdf

GOST 15516-1976 Roller non-powered conveyars sections Portable conveyars Types Main performance and sires《一般用无驱动可移式辊筒传送带 型式 基本参数及尺寸》.pdf

GOST 15518-1987 Plate heat exchanges Types parameters and basic dimensions《片状换热器 型号、参数及基本尺寸》.pdf

GOST 15519-1970 Technical agate and chalcedony Specifications《工业用的玛瑙和玉髓 技术条件》.pdf

GOST 15521-1970 Hexagon nuts with reduced width across flats product grade B Construction and dimensions《B级精度小尺寸扳手的六角螺母 结构及尺寸》.pdf