TCVN 7091-2002 Cigarette paper《卷烟纸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AS 9296B-2015 BOLT MACHINE - HEXAGON HEAD DRILLED 1 HOLE PD SHANK BLACK OXIDE STEEL UNS G87400 125 KSI MIN 3125-24 UNJF-3A.pdf

SAE AS 9297B-2015 BOLT MACHINE - HEXAGON HEAD DRILLED 1 HOLE PD SHANK BLACK OXIDE STEEL UNS G87400 125 KSI MIN 3750-24 UNJF-3A.pdf

SAE AS 9308B-2014 STUD SHOULDERED HEX WRENCHING DRILLED STEEL UNS G87400 CAD PLATED 125 KSI MIN 1900-32 UNF-3A X 1900-32 UNF-3A《带肩 六角头扳紧 钻孔 UNS G87400钢制 CAD 金属覆盖 最小125 KSI 1900-32 .pdf

SAE AS 9309B-2014 STUD SHOULDERED STEPPED HEX WRENCHING DRILLED STEEL UNS G87400 CAD PLATED 125 KSI MIN 1900-32 UNF-3A X 2500-28 UNF-3A《带肩 分级 六角头扳紧 钻孔 UNS G87400钢制 CAD 金属覆盖 最小125 K.pdf

SAE AS 930E-1998 FITTING END STRAIGHT THREAD PORT CONNECTION DESIGN STANDARD《端口连接直螺纹接头端设计标准》.pdf

SAE AS 9311B-2014 STUD SHOULDERED STEPPED HEX WRENCHING DRILLED STEEL UNS G878400 CAD PLATED 125 KSI MIN 2500-28 UNF-3A X 3125-24 UNF-3A《带肩 分级 六角头扳紧 钻孔 UNS G87400钢制 CAD 金属覆盖 最小125 .pdf

SAE AS 9312B-2014 STUD SHOULDERED STEPPED HEX WRENCHING DRILLED STEEL UNS G87400 CAD PLATED 125 KSI MIN 2500-28 UNF-3A X 3750-24 UNF-3A《 2500-28 UNF-3A 3750-24 UNF-3A X 最小值为125 KSI.pdf

SAE AS 9316B-2012 SCREW MACHINE - HEXAGON HEAD SLOTTED FULL SHANK ALLOY STEEL UNS K14675 135 KSI MIN 1900-32 UNS-3A《机械螺钉 UNS K14675 135 KSI MIN 1900-32 UNS-3A全柄 开槽 六角头螺栓》.pdf

SAE AS 9318A-2006 RIVET SOLID - 100 LUSH HEAD MONEL UNS N04400《实心铆钉 铜镍合金100埋头UNS N04400》.pdf