TCVN 7122-1-2007 Leather Physical and mechanical tests Determination of tear load Part 1 Single edge tear《皮革 物理和机械试验 撕裂力的测定 第1部分 单边撕裂》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 14402-1999 en Water Quality - Determination of Phenol Index by Flow Analysis (FIA and CFA)《水质 流量分析方法测定苯酚指数(FIA和CFA)ISO 14402-1999》.pdf

EN ISO 14403-1-2012 en Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 1 Method using flow injection analysis (FIA)《水质 用连续流.pdf

EN ISO 14403-2-2012 en Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 2 Method using continuous flow analysis (CFA)《水质 连续流.pdf

EN ISO 14405-1-2010 2529 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1 Linear sizes《产品几何技术规范(GPS) 尺寸公差 第1部分 线性尺寸》.pdf

EN ISO 14405-1-2016 en Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1 Linear sizes《产品几何技术规范(GPS)-尺寸公差第1部分 线性尺寸(ISO 14405-1 2016)》.pdf

EN ISO 14405-2-2011 en Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2 Dimensions other than linear sizes《产品几何量技术规范(GPS) 尺寸公差 第2部分 除了线性尺寸之外的尺寸》.pdf

EN ISO 14405-3-2017 en Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3 Angular sizes《产品几何技术规范(GPS)-尺寸公差第3部分 角尺寸(ISO 14405-3 2016)》.pdf

EN ISO 14406-2010 en Geometrical product specifications (GPS) - Extraction《几何产品规范(GPS) 提取》.pdf

EN ISO 14408-2009 3125 Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information《激光手术用气管导管 标记和伴随信息的要求》.pdf