TIA TSB-102 CBBC-A-2015 Project 25 Recommended Compliance Assessment Tests C Transceiver Performance C Conventional Mode Fixed Station.pdf

上传人:sumcourage256 文档编号:1059681 上传时间:2019-03-31 格式:PDF 页数:14 大小:422.29KB
下载 相关 举报
TIA TSB-102 CBBC-A-2015 Project 25 Recommended Compliance Assessment Tests C Transceiver Performance C Conventional Mode Fixed Station.pdf_第1页
第1页 / 共14页
TIA TSB-102 CBBC-A-2015 Project 25 Recommended Compliance Assessment Tests C Transceiver Performance C Conventional Mode Fixed Station.pdf_第2页
第2页 / 共14页
TIA TSB-102 CBBC-A-2015 Project 25 Recommended Compliance Assessment Tests C Transceiver Performance C Conventional Mode Fixed Station.pdf_第3页
第3页 / 共14页
TIA TSB-102 CBBC-A-2015 Project 25 Recommended Compliance Assessment Tests C Transceiver Performance C Conventional Mode Fixed Station.pdf_第4页
第4页 / 共14页
TIA TSB-102 CBBC-A-2015 Project 25 Recommended Compliance Assessment Tests C Transceiver Performance C Conventional Mode Fixed Station.pdf_第5页
第5页 / 共14页
点击查看更多>>
资源描述

1、 TSB-102.CBBC-A June 2015Project 25 Recommended Compliance Assessment Tests- Transceiver Performance- Conventional Mode Fixed Station NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers

2、, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA fr

3、om manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance

4、with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associ

5、ated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document are for informat

6、ion purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project Proposal No. TIA-PN-102.CBBC-A, formulated under the cognizance of the TIA, TR-8 Mobile and Personal Private Radio Standards. TR-8.25 Subcommittee on Compliance Assess

7、ment). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology and Standards Department 1320 N. Courthouse Road, Suite 200 Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA

8、and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posti

9、ng on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.o

10、rg/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards

11、 development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of pa

12、tents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity o

13、f any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent tha

14、t procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publicati

15、on of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or i

16、nvestigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applicati

17、ons shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Docume

18、nt. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTEN

19、TS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING

20、 THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, AR

21、ISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WAR

22、RANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TSB-102.CBB

23、C-A Foreword (This foreword is not part of this bulletin.) This document has been submitted to APCO/NASTD/FED by the Telecommunications Industry Association (TIA), as provided for in a Memorandum of Understanding (MOU) dated December 1993. That MOU provides that APCO/NASTD/FED will devise a Common S

24、ystem Standard for digital public safety communications (the Standard), and that TIA shall provide technical assistance in the development of documentation for the Standard. This document has been developed with inputs from the APCO/TIA Project 25 Interface Committee (APIC), the APIC Compliance Asse

25、ssment Process and Procedures Task Group, and TIA Industry members. This document is being published because it is felt that there is an urgent need for technical information on the emerging digital techniques for Land Mobile Radio Service. This document describes a subset of tests appropriate for c

26、onsideration by the P25 Compliance Assessment Program Governance Board for inclusion in the Compliance Assessment Program testing associated with Transceiver Performance for a Conventional Mode Fixed Station transceiver. As other documents associated with compliance assessment are developed, this do

27、cument will be subject to change. The P25 Compliance Assessment Program uses a subset of published standard tests to “assess” compliance and is not intended to imply an exhaustive standard compliance verification. Standardized Measurement Methods and Performance Recommendations for the tests identif

28、ied here can be found in the normative references to this document. TSB-102.CBBC-A 1 Table of Contents 1 INTRODUCTION 2 1.1 Scope 2 1.2 Revision History 3 1.3 References 3 2 TESTS 4 List of Tables Table 1-1 Revision History 3 Table 2-1 Conventional Mode Fixed Station Receiver Tests 4 Table 2-2 Conve

29、ntional Mode Fixed Station Transmitter Tests 4 TSB-102.CBBC-A 2 1 Introduction The purpose of this Telecommunications Systems Bulletin is to identify the subset of tests appropriate for consideration by the P25 Compliance Assessment Program Governance Board for inclusion in the P25 Compliance Assess

30、ment Program testing of Performance for a Conventional Mode Fixed Station transceiver. The P25 Compliance Assessment Program intends to demonstrate that the equipment from different manufacturers will interoperate with respect to P25 defined features, services and interfaces. The P25 Compliance Asse

31、ssment Program uses a subset of published standard tests to “assess” compliance and is not intended to imply an exhaustive standard compliance verification. The full set of Transceiver Measurement Methods and Performance Recommendations published by TIA for P25 may be found in references 1 and 2. Th

32、is document does not substitute or override any of the tests in reference 1 or 2. This document identifies a subset of the full set of tests in references 1 and 2 appropriate for P25 Compliance Assessment performance testing for a base station transceiver operating in the Conventional mode. This doc

33、ument was drafted and reviewed within the APCO/TIA Project 25 Interface Committee (APIC), Compliance Assessment Process and Procedures Task Group (CAPPTG), and represents the consensus achieved within the CAPPTG once the comment review period was concluded. The draft was subsequently updated to refl

34、ect the CAPPTG agreements in preparation for publication. 1.1 Scope This Bulletin identifies the tests appropriate for consideration by the P25 Compliance Assessment Program Governance Board for Compliance Assessment testing in the area of Performance of a Conventional Mode Fixed Station transceiver

35、. These tests were deemed appropriate by the industry and user members participating in the work of the Compliance Assessment Process and Procedures Task Group (CAPPTG). The CAPPTG includes TIA members and representatives of Federal, State and Local Public Safety agencies and organizations. This gro

36、up, being familiar with the relevant published standards, available P25 equipment and test equipment and the general intentions of the P25 Compliance Assessment Program, reviewed all tests and performance recommendations described in references 1 and 2. The P25 Compliance Assessment Program confirms

37、 that the equipment of different manufacturers will interoperate with respect to the P25 defined features, services and interfaces. P25 Compliance Assessment testing of the Common Air Interface is expected to eventually include; Performance Tests ensuring the Common Air Interface endpoints are legit

38、imate P25 devices for Trunking mode operation, Conventional mode operation, or both. TSB-102.CBBC-A 3 Conformance Tests ensuring the Common Air Interface endpoints exchange the proper messages under the proper circumstances for Trunking mode operation, Conventional mode operation, or both. Interoper

39、ability Tests ensuring that Common Air Interface endpoints from different manufacturers do functionally interoperate for Trunking mode operation, Conventional mode operation, or both. In determining the tests appropriate for P25 Compliance Assessment Program testing in this area, the group considere

40、d whether tests in references 1 and 2 were important for achieving interoperability between equipment of different manufacturers versus tests important for product design and/or certification. In general, tests that were determined to be more oriented towards product design and/or certification (suc

41、h as but not limited to FCC certification) were deemed unnecessary for inclusion in this list. The resulting list therefore represents tests that are most important for or most likely to impact interoperability between manufacturers building to the same set of published standard documents. 1.2 Revis

42、ion History Version Date Description First Edition February, 2009 Approved for publication. Second Edition May, 2015 Approved for publication. Table 1-1 Revision History 1.3 References 1.3.1 Normative References 1 TIA-102.CAAA-D C4FM/CQPSK Transceiver Measurement Methods 2 TIA-102.CAAB-D C4FM/CQPSK

43、Transceiver Performance Recommendations TSB-102.CBBC-A 4 2 Tests The following tables are derived from references 1 and 2. These tables define the subset of tests determined appropriate for demonstrating compliance as part of the P25 Compliance Assessment Program. Each test is listed referencing its

44、 corresponding method of measurement from 1 and its corresponding performance recommendation from 2. Conventional Station Receiver Tests Method of Measurement 1 Performance Recommendation 2 Reference sensitivity 2.1.4 3.1.4 Faded Reference Sensitivity 2.1.5 3.1.5 Adjacent Channel Rejection 2.1.7 3.1

45、.7 Co-Channel Rejection 2.1.8 3.1.8 Spurious Response Rejection 2.1.9 3.1.9 Intermodulation Rejection 2.1.10 3.1.10 Signal Displacement Bandwidth 2.1.11 3.1.11 Late Entry Unsquelch Delay1 2.1.17 3.1.17 Receiver Throughput Delay1 2.1.18 3.1.18 Table 2-1 Conventional Mode Fixed Station Receiver Tests

46、1These tests apply to fixed stations which provide an audio (analog) output. Conventional Station Transmitter Tests Method of Measurement 1 Performance Recommendation 2 Unwanted Emissions: Adjacent Channel Power Ratio 2.2.8 3.2.8 Transmitter Throughput Delay2 2.2.14 3.2.14 Frequency Deviation for C4

47、FM 2.2.15 3.2.15 Modulation Fidelity 2.2.16 3.2.16 Transient Frequency Behavior 2.2.18 3.2.18 Table 2-2 Conventional Mode Fixed Station Transmitter Tests 2Applies to fixed stations which provide an audio (analog) input. THE TELECOMMUNICATIONS INDUSTRY ASSOCIATION TIA represents the global informatio

48、n and communications technology (ICT) industry through standards development, advocacy, tradeshows, business opportunities, market intelligence and world-wide environmental regulatory analysis. Since 1924, TIA has been enhancing the business environment for broadband, wireless, information technolog

49、y, cable, satellite, and unified communications. TIA members products and services empower communications in every industry and market, including healthcare, education, security, public safety, transportation, government, the utilities. TIA is accredited by the American National Standards Institute (ANSI).

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1