1、 TSB-102-C March 2016Project 25 TIA-102 Documentation Suite Overview NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, an
2、d assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Stand
3、ards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent poli
4、cy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It i
5、s the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document are for information purposes and do not constitute an endorsement by TIA or this
6、committee of the products or services of the company. (From Project No. TIA-PN-102-C, formulated under the cognizance of the TIA TR-8 Mobile and Personal Private Radio Standards. Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology (b) there is no assurance that the Document will be appro
7、ved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), incl
8、uding pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in acco
9、rdance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, n
10、or will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contain
11、s one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate
12、 or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of
13、voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA o
14、f a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Doc
15、ument. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPER
16、TY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REF
17、ERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUEN
18、TIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAG
19、ES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TSB-102-C i Foreword (This foreword is not part of this bulletin.) This document has been created in response to a request by the Project 25 Steering Committee as
20、 provided for in a Memorandum of Understanding (MOU) dated April 1992 and amended December 1993. That MOU states APCO/NASTD/FED shall devise a common system standard for digital public safety communications (the Standard) commonly referred to as Project 25 or P25, and that TIA, as agreed to by the m
21、embership of the appropriate TIA Engineering Committee, will provide technical assistance in the development of documentation for the Standard. If the symbol “P25” or the wording “Project 25” appears on the cover sheet of this document when published that indicates the Project 25 Steering Committee
22、has adopted this document as part of the Standard. The appearance of the abbreviation “P25” or the wording “Project 25” on the cover sheet of this document or in the title of any document referenced herein should not be interpreted as limiting the applicability of the information contained in any do
23、cument to “P25” or “Project 25” implementations exclusively. This document has been developed by TIA TR-8 (Mobile and Personal Private Radio Standards) taking into account input from the APCO Project 25 Interface Committee (APIC), and was originated in the APIC Systems Task Group. This document is b
24、eing published to address the need for technical information on the emerging digital techniques for Land Mobile Radio Service. This document provides an informative overview of the interfaces, services, and functionality covered by the TIA-102 series including those identified in the Project 25 Stat
25、ement of Requirements promulgated by the Project 25 Steering Committee and identifies the TIA-102 documents that define those interfaces, services and functionalities. This document is subject to change as the TIA-102 series of documents develops upgraded and/or new interfaces, features and services
26、. TSB-102-C ii Table Of Contents 1 Introduction 1 1.1 Purpose and Scope of this Document 1 1.2 Document Organization 2 1.3 Revision History 2 1.4 References . 3 1.5 Glossary of Terms, Acronyms, and Abbreviations 3 2 Functional Network Model and Services Overview . 4 2.1 Functional Network Model 4 2.
27、2 Land Mobile Radio Systems correlation to the Representative Functional Network Model 6 2.2.1 LMR System Types . 7 2.2.1.1 Conventional LMR Systems . 8 2.2.1.2 Trunked LMR Systems . 8 2.3 Services enabled by the TIA-102 series of documents . 9 2.3.1 TIA-102 Teleservices . 10 2.3.1.1 Broadcast Voice
28、 Call 10 2.3.1.2 Announcement Group Call . 11 2.3.1.3 Unaddressed Voice Call . 11 2.3.1.4 Group Voice Call 11 2.3.1.5 Emergency Group Voice Call . 11 2.3.1.6 Individual Voice Call . 12 2.3.1.7 System Call 12 2.3.1.8 All Call (System Wide Call) . 12 2.3.2 TIA-102 Data Services 12 2.3.2.1 Low Speed Da
29、ta Service 13 2.3.2.2 Supplementary Services . 13 2.3.2.2.1 Pre-Programmed Data Service . 13 2.3.2.2.1.1 Status Update . 14 2.3.2.2.1.2 Short Message 14 2.3.2.2.1.3 Status Query . 14 2.3.2.2.2 Supplementary Data Services . 14 2.3.2.2.2.1 Emergency Alarm 15 2.3.2.2.2.2 Emergency Alarm Cancel 15 2.3.2
30、.2.2.3 Group Emergency Cancel . 15 2.3.2.2.2.4 Call Alert 16 2.3.2.2.2.5 Radio Check 16 2.3.2.2.2.6 Radio Unit Inhibit/Uninhibit 16 2.3.2.2.2.7 Radio Detach 16 2.3.2.2.2.8 Radio Unit Monitoring 16 2.3.2.3 Packet Data Service . 16 2.3.2.3.1 Packet Data Network Access 17 2.3.2.3.2 CAI Data Bearer Serv
31、ice . 17 2.3.2.3.3 IP Data Bearer Service 18 TSB-102-C iii 2.3.2.4 Applications Utilizing Packet Data Bearer Services 18 2.3.2.4.1 Location Services 18 2.3.2.4.1.1 Tier 1 Location Service 18 2.3.2.4.1.2 Tier 2 Location Service 18 2.3.2.4.2 Over The Air Rekeying (OTAR) . 18 2.3.3 TIA-102 Supplementar
32、y Services 19 2.3.3.1 Supplementary Voice Services . 19 2.3.3.1.1 Priority Call 19 2.3.3.1.2 Preemptive Priority Call . 20 2.3.3.1.3 Dispatcher Audio Takeover . 20 2.3.3.1.4 Console Take Over by Another Console . 20 2.3.3.1.5 Voice Telephone Interconnect . 21 2.3.3.1.5.1 Group Telephone Interconnect
33、 21 2.3.3.1.5.2 Individual Telephone Interconnect . 21 2.3.3.1.6 Discreet Listening 21 2.3.3.1.7 Transport of Talking Party Identification 21 2.3.3.2 Supplementary Data Services 21 2.3.4 TIA-102 Mobility and Registration Services . 21 2.3.4.1 Number Ranges (Addressing) 23 2.3.4.2 Registration 23 2.3
34、.4.2.1 Full or Unit Registration . 23 2.3.4.2.2 Location Registration . 23 2.3.4.2.3 Registration Area . 23 2.3.4.2.4 Deregistration 24 2.3.4.3 Affiliation . 24 2.3.4.4 Roaming . 24 2.3.4.4.1 Intra-System and Intra-RFSS Roaming . 24 2.3.4.4.2 Inter-System, Inter-RFSS, and Inter-WACN Roaming . 24 2.3
35、.4.5 Call Restriction 25 2.3.4.6 Call Routing 25 2.3.4.7 RFSS Service Capability Polling . 25 2.3.4.8 Dynamic Regrouping 25 2.3.5 TIA-102 Security Services . 25 2.3.5.1 Encryption . 26 2.3.5.2 SU Authentication . 26 2.3.5.3 Encryption Key Update . 27 2.3.5.4 Manual (Wired) Rekeying or Key Fill 27 2.
36、3.5.5 Over The Air Rekeying (OTAR) 27 2.3.6 TIA-102 Network Management services 27 2.3.6.1 Provisioning of the Network Management Interface . 28 2.3.7 TIA-102 Services Local to the Subscriber Unit 28 2.3.7.1 Conventional Squelch Modes . 28 2.3.7.1.1 Monitor Squelch (Digital Carrier Squelch) . 29 2.3
37、.7.1.2 Normal Squelch . 29 2.3.7.1.3 Selective Squelch 29 2.3.7.2 Busy Channel Lockout 29 TSB-102-C iv 2.3.7.3 Silent Emergency . 29 2.3.7.4 Electronic Serial Number 29 2.3.7.5 Reception of Modulations . 29 2.3.7.6 Control Channels 30 2.3.7.6.1 Composite Control Channel (Single Station Site or Traff
38、ic on Control) . 30 3 TIA-102 System Functional Elements and Open Interfaces Overview 31 3.1 Terminology Relating to the Representative TIA-102 Model 32 3.1.1 Wide Area Network 32 3.1.2 Wide Area System . 32 3.1.3 System 33 3.1.4 Radio Frequency Subsystem (RFSS) 33 3.1.5 Radio Frequency (RF) Site 34
39、 3.1.5.1 Voting Configurations . 34 3.1.5.2 Simulcast Configurations 34 3.1.6 Radio Frequency Channel . 34 3.2 TIA-102 System Interfaces Overview . 34 3.2.1 Common Air Interface (CAI) 35 3.2.2 Mobile Data Peripheral Interface . 36 3.2.3 Inter-RF Subsystem Interface (ISSI) 37 3.2.4 Telephone Intercon
40、nect Interface 37 3.2.5 Console Subsystem Interface (CSSI) 38 3.2.6 Fixed Station Subsystem Interface (FSSI) . 39 3.2.7 Data Host Network Interface 39 3.2.8 Network Management Interface . 40 3.2.9 Key Fill Device - Mobile Radio Interface 41 3.2.10 Inter-Key Management Facility Interface . 41 3.3 Ref
41、erence Configurations Examples . 42 3.3.1 Example Repeater Configurations . 43 3.3.2 Example Non-Repeater Configurations . 43 4 TIA-102 Series of Documents Overview . 44 4.1 Structure and Designation of the TIA-102 Series of Documents 44 4.2 TIA-102 Service Document Category (*-102.A_) . 46 4.3 TIA-
42、102 System Document Category (*-102.B_) . 46 4.4 TIA-102 Test Document Category (*-102.C_) 47 4.5 Document Topics and TIA Designations . 47 4.6 Summary Descriptions of the TIA-102 and Related Series of Documents54 4.6.1 Summary Description of the TIA-102 Documentation Suite Overview54 4.6.2 Summary
43、Descriptions of the TIA-102 Overview Category Documents54 4.6.2.1 TIA-102.AAAB Project 25 Security Services Overview. 54 4.6.2.2 TIA-102.AABA Project 25 Trunking Overview 54 4.6.2.3 TSB-102.BACC Project 25 Inter-RF Subsystem Interface Overview 54 TSB-102-C v 4.6.2.4 TSB-102.BADA Project 25 Telephone
44、 Interconnect Overview (Voice Service) . 54 4.6.2.5 TIA-102.BAEA Project 25 Data Overview and Specification . 55 4.6.2.6 TSB-102.BAGA Project 25 Console Subsystem Interface Overview 55 4.6.2.7 TIA-102.BAHA Project 25 Fixed Station Interface Messages and Procedures . 55 4.6.2.8 TIA-102.BAKA Project 2
45、5 KMF to KMF Interface . 55 4.6.2.9 TSB-102.BAFA Project 25 Network Management Interface Overview 55 4.6.2.10 TSB-102.BBAA Project 25 Two-Slot TDMA Overview 55 4.6.3 Summary Descriptions of the TIA-102.A_ Service Category Documents . 56 4.6.3.1 TIA-102.AAAD Project 25 Block Encryption Protocol . 56
46、4.6.3.2 TIA-102.AABB Trunking Control Channel Formats. 56 4.6.3.3 TIA-102.AABC Project 25 Trunking Control Channel Messages 56 4.6.3.4 TIA-102.AABD Project 25 Trunking Procedures . 56 4.6.3.5 TIA-102.AABF Project 25 Link Control Word Formats and Messages . 56 4.6.3.6 TIA-102.AABG Project 25 Conventi
47、onal Control Messages . 56 4.6.3.7 TIA-102.AACA Project 25 OTAR Messages and Procedures . 57 4.6.3.8 TIA-102.AACD Project 25 Key Fill Device Interface Protocol . 57 4.6.3.9 TIA-102.AACE Project 25 Link Layer Authentication 57 4.6.3.10 TIA-102.AABH Project 25 Dynamic Regrouping Messages and Procedure
48、s . 57 4.6.4 Summary Descriptions of the TIA-102.B_ System Category Documents . 57 4.6.4.1 TIA-102.BAAA Project 25 FDMA Common Air Interface (CAI) . 57 4.6.4.2 TIA-102.BAAC Project 25 CAI Reserved Values 57 4.6.4.3 TIA-102.BAAD Project 25 Conventional Procedures 58 4.6.4.4 TIA-102.BABA Project 25 Vo
49、coder Description 58 4.6.4.5 TIA-102.BACA Project 25 Inter-RF Subsystem Interface Messages and Procedures for Voice Services, Mobility Management, and RFSS Capability Polling Services . 58 4.6.4.6 TIA-102.BACD Project 25 Inter-RF Subsystem Interface Messages and Procedures for Supplementary Data 58 4.6.4.7 TIA-102.BACE Project 25 Inter-RF Subsystem Interface Messages and Procedures for Conventional Operation . 58 4.6.4.8 TIA-102.BACF Project 25 Inter-RF Subsystem Interface Messages and Procedures for Packet Data Services . 59 4.6.4.9 TIA-102.BAEB Project 25 IP Data Bea
