1、 TIA STANDARD Test Application Protocol for Terrestrial Mobile Multimedia Multicast Forward Link Only Transmitters and Devices TIA-1104 December 2006 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industries Alliance NOTICE TIA
2、 Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the pro
3、per product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Public
4、ations preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor
5、does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safe
6、ty and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-0239, formulated under the cognizance of the TIA, TR-47.1 Subcommittee on Terrestrial Mobile Multimedia Multicast based on Forward Link Only Technology). Published by TELECOMMUNIC
7、ATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Information Handling Services, USA and Canada (1-877-4
8、13-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is p
9、rohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/in
10、fo.cfm#copyright OR Telecommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any edit
11、ing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pend
12、ing patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA
13、 will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practice
14、s suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether
15、 designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other
16、SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in th
17、e records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate
18、 products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR U
19、SE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR RE
20、GULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HERE
21、IN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWI
22、SE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-1104 Test Application Protocol for TM3 Forward Link Only Transmitters a
23、nd Devices CONTENTS i FOREWARD . ix 1 NORMATIVE REFERENCES . xi 2 1 OVERVIEW .1-1 3 1.1 Scope of this Document.1-1 4 1.2 Objectives1-1 5 1.3 Requirement Language1-1 6 1.4 Protocol Overview 1-1 7 1.5 Acronyms 1-2 8 1.6 Terms1-2 9 2 Forward Link Only Test Application Protocol (FTAP) specification2-1 1
24、0 2.1 Overview2-1 11 2.2 Data Encapsulation.2-2 12 2.3 Protocol states.2-2 13 2.4 Primitives and Public Data 2-3 14 2.4.1 Commands 2-3 15 2.4.1.1 Activate2-3 16 2.4.1.2 Deactivate2-4 17 2.4.2 Return Indications.2-4 18 2.4.2.1 TestStatisticsAvailable (device only) .2-4 19 2.4.3 Public Data2-5 20 2.5
25、Protocol Data Unit.2-5 21 2.6 Test statistics 2-5 22 2.6.1 Forward Link Only Device requirements 2-5 23 2.6.1.1 Statistics for Data Transfer Mode.2-5 24 2.6.1.2 Statistics for OIS Reception Mode 2-6 25 2.6.1.3 Statistics for WIC/LIC Reception Mode 2-7 26 2.6.2 Forward Link Only Network Requirements.
26、2-7 27 2.7 Procedures 2-8 28 2.7.1 Test Parameter Configuration 2-8 29 2.7.1.1 Forward Link Only Device Requirements .2-8 30 2.7.1.2 Forward Link Only Network Requirements.2-8 31 Test Application Protocol for TM3 TIA-1104 Forward Link Only Transmitters and Devices CONTENTS ii 2.7.2 Instantiation and
27、 Initialization 2-8 1 2.7.2.1 Forward Link Only Device Requirements .2-8 2 2.7.2.1.1 Data Transfer mode Requirements.2-8 3 2.7.2.1.2 OIS reception mode Requirements.2-9 4 2.7.2.1.3 WIC/LIC Reception Mode Requirements 2-10 5 2.7.2.2 Forward Link Only Network Requirements 2-10 6 2.7.3 FTAP Packet Tran
28、smission and Reception .2-11 7 2.7.3.1 Forward Link Only Device Requirements .2-11 8 2.7.3.1.1 Data Transfer Mode Requirements.2-11 9 2.7.3.1.2 OIS Reception Mode Requirements 2-11 10 2.7.3.1.3 WIC/LIC Reception Mode Requirements 2-11 11 2.7.3.2 Forward Link Only Network Requirements 2-11 12 2.7.4 S
29、tatistics Collection and Retrieval .2-12 13 2.7.4.1 Forward Link Only Device Requirements .2-12 14 2.7.4.1.1 Data Transfer Mode Requirements.2-12 15 2.7.4.1.2 OIS Reception Mode Requirements 2-13 16 2.7.4.1.3 WIC/LIC Reception Mode Requirements 2-14 17 2.7.4.2 Forward Link Only Network Requirements
30、2-15 18 2.8 Formats 2-15 19 2.8.1 Test Statistics Format for FTAP in Data Transfer Mode2-15 20 2.8.2 Test Statistics Format for FTAP in OIS Reception Mode .2-18 21 2.8.3 Test statistics format for FTAP in WIC/LIC Reception Mode.2-19 22 2.8.4 FTAP Packet Format2-20 23 2.9 Interface with Other Protoco
31、ls .2-21 24 2.9.1 Commands2-21 25 2.9.2 Indications 2-22 26 3 ANNEX A - INFORMATIVE 3-1 27 3.1 Data Transfer Mode Performance Computation .3-1 28 3.1.1 Pre Reed-Solomon Packet Error Rate.3-1 29 3.1.2 Post Reed-Solomon Packet Error Rate .3-1 30 3.2 OIS Reception Mode Performance Computation 3-2 31 TI
32、A-1104 Test Application Protocol for TM3 Forward Link Only Transmitters and Devices CONTENTS iii 3.3 WIC/LIC reception Mode Performance Computation3-2 1 3.3.1 WID Error Rate3-2 2 3.3.2 LID Error Rate .3-2 3 Test Application Protocol for TM3 TIA-1104 Forward Link Only Transmitters and Devices CONTENT
33、S iv No text.1 TIA-1104 Test Application Protocol for TM3 Forward Link Only Transmitters and Devices FIGURES v Figure 2.1-1 FTAP Layering2-1 1 Figure 2.2-1 FTAP Packet Encapsulation.2-2 2 Figure 2.3-1 Forward Link Only Test Application Protocol State Diagram for Network3 .2-3 4 Figure 2.3-2 Forward
34、Link Only Test Application Protocol State Diagram for Device.2-3 5 Figure 2.5-1 FTAP Packet Structure .2-5 6 Figure 2.8-1 SSRG Implementation of the Sequence 1/ (1 + x + x15).2-21 7 Test Application Protocol for TM3 TIA-1104 Forward Link Only Transmitters and Devices FIGURES vi No text. 1 TIA-1104 T
35、est Application Protocol for TM3 Forward Link Only Transmitters and Devices TABLES vii Table 1.5-1 List of Acronyms1-2 1 Table 2.8-1 Test Statistics Format for Data Transfer Mode .2-15 2 Table 2.8-2 FTAPPacketType values .2-17 3 Table 2.8-3 Test Statistics Format for OIS Reception Mode.2-18 4 Table
36、2.8-4 Test statistics format for WIC/LIC Reception Mode 2-19 5 Table 2.8-5 Identification Channel Type in WIC/LIC reception mode2-20 6 Table 2.8-6 FTAP Packet Format 2-20 7 Table 2.8-7 First Hundred Bits of the PN Sequence2-21 8 Test Application Protocol for TM3 TIA-1104 Forward Link Only Transmitte
37、rs and Devices TABLES viii No text.1 TIA-1104 Test Application Protocol for TM3 Forward Link Only Transmitters and Devices ix FOREWORD 1 (This foreword is not part of this Standard) 2 This standard is a companion to the Forward Link Only Air Interface Specification 3 standard. This specification pro
38、vides a set of procedures that the Forward Link Only device 4 and the Forward Link Only network can use to conduct the Forward Link Only device 5 minimum performance tests in a factory/laboratory environment. It also allows 6 measurement of certain Forward Link Only performance parameters in a field
39、 environment. 7 Test Application Protocol for TM3 TIA-1104 Forward Link Only Transmitters and Devices x No text. 1 TIA-1104 Test Application Protocol for TM3 Forward Link Only Transmitters and Devices xi NORMATIVE REFERENCES 1 The following standards and documents contain provisions, which, through
40、reference in 2 this text, constitute provisions of this specification. At the time of publication, the 3 editions indicated were valid. All standards are subject to revision, and parties to 4 agreements based on this standard are encouraged to investigate the possibility of 5 applying the most recen
41、t editions of the standards indicated below. 6 7 1 TIA-1099, Forward Link Only Air Interface Specification for Terrestrial 8 Mobile Multimedia Multicast 9 Test Application Protocol for TM3 TIA-1104 Forward Link Only Transmitters and Devices xii No text.1 TIA-1104 Test Application Protocol for TM3 OV
42、ERVIEW Forward Link Only Transmitters and Devices 1-1 1 OVERVIEW 1 1.1 Scope of this Document 2 This document describes the scope of the Forward Link Only Test Application Protocol. 3 It also outlines the technical requirements that form a compatibility standard for test 4 applications in Forward Li
43、nk Only systems. The scope and requirements specified 5 ensure that a compliant Forward Link Only device and a compliant Forward Link Only 6 network can interoperate to execute tests in meeting the objectives stated in 1.2. 7 The details of the tests are beyond the scope of this document. 8 Procedur
44、es are specified for the Forward Link Only devices to ensure a uniform 9 processing of test messages from all Forward Link Only networks. 10 1.2 Objectives 11 The Forward Link Only Test Application Protocol specified in this document meets the 12 following objectives. It provides a set of procedures
45、 that the Forward Link Only devices 13 and the Forward Link Only network can use 14 To conduct the Forward Link Only device minimum performance tests in a 15 factory/laboratory environment. 16 To conduct measurements of Forward Link Only network physical layer 17 performance in a field environment.
46、18 1.3 Requirement Language 19 Compatibility, as used in connection with this standard, is understood to mean: Any 20 Forward Link Only device can obtain service through any Forward Link Only network 21 conforming to this standard. Conversely, all Forward Link Only networks conforming to 22 this sta
47、ndard can service Forward Link Only devices. 23 “Shall” and “shall not” identify requirements to be followed strictly in conformance with 24 the standard and from which no deviation is permitted. “Should” and “should not” 25 indicate that one of several possibilities is recommended as particularly s
48、uitable, 26 without mentioning or excluding others, that a certain course of action is preferred but 27 not necessarily required, or that (in the negative form) a certain possibility or course of 28 action is discouraged but not prohibited. “May” and “need not” indicate a course of 29 action permiss
49、ible within the limits of the standard. “Can” and “cannot” are used for 30 statements of possibility and capability, whether material, physical, or causal. 31 1.4 Protocol Overview 32 The following is a brief overview of the Forward Link Only Test Application Protocol 33 (FTAP). A complete description of the components can be found in the following 34 sections. 35 FTAP specifies the procedures to configure the flows associated with the Forward Link 36 Only Test Application. It specifies generation and transmission of test packets sent on 37 the FTA flow for the purpose of testing
