TIA-737-2002 IS-41-C Enhancements for Circuit Mode Services《IS-41-C电路模式业务的增强》.pdf

上传人:wealthynice100 文档编号:1060827 上传时间:2019-03-31 格式:PDF 页数:392 大小:13.55MB
下载 相关 举报
TIA-737-2002 IS-41-C Enhancements for Circuit Mode Services《IS-41-C电路模式业务的增强》.pdf_第1页
第1页 / 共392页
TIA-737-2002 IS-41-C Enhancements for Circuit Mode Services《IS-41-C电路模式业务的增强》.pdf_第2页
第2页 / 共392页
TIA-737-2002 IS-41-C Enhancements for Circuit Mode Services《IS-41-C电路模式业务的增强》.pdf_第3页
第3页 / 共392页
TIA-737-2002 IS-41-C Enhancements for Circuit Mode Services《IS-41-C电路模式业务的增强》.pdf_第4页
第4页 / 共392页
TIA-737-2002 IS-41-C Enhancements for Circuit Mode Services《IS-41-C电路模式业务的增强》.pdf_第5页
第5页 / 共392页
点击查看更多>>
资源描述

1、TIA STANDARD IS-41-C Enhancements for Circuit Mode Services TIA-737 JANUARY 2002 TELECOMMUNICATIONS INDUSTRY ASSOCIATION The Teleconmiunications Industry Association represents the conmiunications sector of NOTICE TIAIEIA Engineering Standards and Publications are designed to serve the public intere

2、st through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publicatio

3、ns shall not in any respect preclude any member or nonmember of TIAIEIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than TIAIEIA members, whether the s

4、tandard is to be used either domestically or internationally. Standards and Publications are adopted by TIAIEIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIAIEIA does not assume any liability to any patent owner, nor does it assume any obligat

5、ion whatever to parties adopting the Standard or Publication. TIA STANDARDS TIA Standards contain information deemed to be of technical value to the industry, and are published at the request of the originating Committee without necessarily following the rigorous public review and resolution of comm

6、ents which is a procedural part of the development of a TIAIEIA Standard. TIA Standards should be reviewed on an annual basis by the formulating Committee and a decision made on whether to proceed to develop a TIAIEIA Standard on this subject. TIA Standards must be cancelled by the Committee and rem

7、oved from the TIAIEIA Standards Catalog before the end of their third year of existence. Publication of this TIA Standard for trial use and comment has been approved by the Telecommunications Industry Association. Distribution of this TIA Standard for comment shall not continue beyond 60 months from

8、 the date of publication. It is expected that following this 36 month period, this TIA Standard, revised as necessary, will be submitted to the American National Standards Institute for approval as an American National Standard. Suggestions for revision should be directed to: Standards & Technology

9、Department, Telecommunications Industry Association, 2500 Wilson Boulevard, Arlington, VA 22201 U. S.A. (From Project No. 3-4227, formulated under the cognizance of the TIA TR-45.2 Subcommittee on Wireless Intersystem Technology.) Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2002 Standards &

10、 Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of EIA ELECTRONIC INDUSTRIES ALLIANCE STANDARDS and ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) All rights re

11、served Printed in U.S.A. NOTICE OF DISCLAIMER AND LIMITATION OF LIABILITY The document to which this Notice is affixed has been prepared by one or more Engineering Committees of the Telecommunications Industry Association (“TIA”). TIA is not the author of the document contents, but publishes and cla

12、ims copyright to the document pursuant to licenses and permission granted by the authors of the contents. TIA Engineering Committees are expected to conduct their affairs in accordance with the TIA Engineering Manual (“Manual”), the current and predecessor versions of which are available at http:/ww

13、w.tiaonline.orZr/standards/sfZr/engineering manual.ch. TIAS function is to administer the process, but not the content, of document preparation in accordance with the Manual and, when appropriate, the policies and procedures of the American National Standards Institute (“ANSI”). THE USE OR PRACTICE

14、OF CONTENTS OF THIS DOCUMENT MAY INVOLVE THE USE OF INTELLECTUAL PROPERTY RIGHTS (“IPR), INCLUDING PENDING OR ISSUED PATENTS, OR COPYRIGHTS, OWNED BY ONE OR MORE PARTIES. TIA MAKES NO SEARCH OR INVESTIGATION FOR IPR. WHEN IPR CONSISTING OF PATENTS AND PUBLISHED PATENT APPLICATIONS ARE CLAIMED AND CA

15、LLED TO TIAS ATTENTION, A STATEMENT FROM THE HOLDER THEREOF IS REQUESTED, ALL IN ACCORDANCE WITH THE MANUAL. TIA TAKES NO POSITION WITH REFERENCE TO, AND DISCLAIMS ANY OBLIGATION TO INVESTIGATE OR INQUIRE INTO, THE SCOPE OR VALIDITY OF ANY CLAIMS OF IPR. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCL

16、AIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FORA PARTICULAR PURPOSE PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESEN

17、TATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION. OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINE

18、D HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR O

19、THERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-737 I 2 3 4 5 6 I 8 9 10 II 12 13 14 15 16 11 18 19 20 21 22 23 2

20、4 25 26 21 28 29 30 31 32 33 34 35 36 31 38 39 40 41 42 43 44 45 46 41 48 49 50 51 52 53 54 55 56 51 58 59 60 TINEIA-664 MODIFICATIONS CONTENTS CONTENTS . . . i REVISION HISTORY 11 1.1 Asynchronous Data Service (ADS) 1 1.1.2 Exception Procedures or Unsuccessful Outcome 3 1.1.1 Normal Procedures With

21、 Successful Outcome 1 1.1.3 Alternative Procedures 4 1.1.4 Interactions With Other Wireless Services 4 Data Privacy (DP) . 8 1.2.1 Normal Procedures With Successful Outcome 8 1.2.3 Alternative Procedures 10 1.2.4 Interactions With Other Wireless Services 10 Group 3 Facsimile Sei-vice (G3 Fax) 14 1.3

22、.1 Normal Procedures With Successful Outcome 14 1.3.2 Exception Procedures or Unsuccessful Outcome 16 1.3.3 Alternative Procedures 17 1.3.4 Interactions With Other Wireless Services 17 1.2 1.2.2 Exception Procedures or Unsuccessful Outcome 9 1.3 1.4 Service Negotiation (SN) 21 1.4.2 Exception Proced

23、ures or Unsuccessful Outcome 22 1.4.1 Normal Procedures with Successful Outcome 21 1.4.3 Alternative Procedures 23 1.4.4 Interactions With Other Wireless Services 23 Mobile Tei-mination Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

24、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 1.5.1 Mobile Termination Type 2 (MT2) 27 1.5 Stage I-i Contents TIA-737 Revision O REVISION HISTORY Date Remark December 1997 Initial publication. Revision History Stagel-ii i 2 3 4 5 6 1 8 9 10 II 12 13 14 15 16 11 18 19 20 2

25、1 22 23 24 25 26 21 28 29 30 31 32 33 34 35 36 31 38 39 40 41 42 43 44 45 46 41 48 49 50 51 52 53 54 55 56 51 58 59 60 I 2 TIA-737 I 2 3 4 5 6 I 8 9 10 II 12 13 14 15 16 11 18 19 20 21 22 23 24 25 26 21 28 29 30 31 32 33 34 35 36 31 38 39 40 41 42 43 44 45 46 41 48 49 50 51 52 53 54 55 56 51 58 59 6

26、0 1 .I Asynchronous Data Service (ADS) This telecommunication service allows digital wireless subscribers to send and receive asynchronous data. ADS provides functionality similar to a wireline modem in that the data is modified to malte it suitable for transporting over the appropriate medium. Both

27、 wireless and wireline media are accommodated to support inteiworlung between the two networks in a way that is transparent to the terminal equipment. The subscribers terminal equipment inteifaces to a conventional DCE (Data Circuit-Teiminating Equipement) data port. The far-end DCE inteiworlts each

28、 end function as if connected to a compatible device. ADS procedures and inteifaces are specified by appropriate air interface standards (e.g., TIA/EIA/IS-99 orTIA/EIA/IS-I 35 and TIA/EIA/S-I 30). These TIA standards specify compliance with other common TIA data standards (e.g., EIA/TIA-602) and ITU

29、 recommendations (e.g., . V32 bis, V.42). Mobile originated service may be of two types: Data Only and Voice Then Data. Mobile terminated service may be of three types: One Number per Service, Two-Stage Dialing, or Voice Then Data. Applicability to Telecommunications Services ADS is applicable to da

30、ta telecommunication services. ADS is applicable to voice services in those cases where a voice call is made prior to a user initiated voice to data service change. 1 .I .I Normal Procedures With Successful Outcome Authorization ADS may be provided after preail-angement with the service provider, or

31、 may be made generally available by the service provider. De-Au t h 0 rizat 1 0 n If ADS is provided after preail-angement with the service provider, the sei-vice shall be deauthorized at the subscribers request or for administrative reasons. Reg ist ration ADS has no registration. De-Reg ist rat 1

32、on ADS has no deregistration. Stage 1 - 1 Asynchronous Data Service (ADS) TIA-737 Activation ADS shall be activated upon authorization and issuance of the proper AT command. De-Activation ADS shall be de-activated upon deauthorization or issuance of the proper AT command. Invocation ADS is invoked b

33、y issuing the appropriate AT commands (e.g., ATD command). Mobile Origination Mobile originated service may be of two types: Data Only and Voice Then Data. - Data Only A mobile subscriber originates a data call to a terminating party (PSTN user or mobile subscriber). The terminating party may either

34、 have a separate telephone number for data services, or (based on calling tones, alerting pattein, or some other means) utilize a single line to terminate both voice and data services. - Voice Then Data A mobile subscriber originates a voice call to a terminating party (PSTN user or mobile subscribe

35、r). The terminating party has a single telephone number for both voice and data services. The call is answered as a voice call when the modem is made ready, the mobile subscriber initiates a voice to data service change. In another case, the originating mobile subscriber infoi-ms the terminating par

36、ty that the inprogress voice call shall be ended, then call back with a data call. The originating mobile subscriber then initiates a data call. Mobile Termination Mobile terminated service may be one of three types: One Number per Service, Two- Stage Dialing, or Voice Then Data. - One Number per Se

37、rvice An originating party places a data call to the terminating mobile subscriber. The mobile station has a separate telephone number for data calls. - Two-Stage Dialing The wireless carrier has one or more Directory Numbers (DN) for ADS service. Since the number is related to the service, it is sh

38、ared by all subscribers. An originating party places a call to one of the ADS DNs. The number selected corresponds to the requested data service. When the data service retuns dial tone, the originating partys modem dials the terminating mobile subscribers DN. The call is presented as a data call. 1

39、2 3 4 5 6 1 8 9 10 II 12 13 14 15 16 11 18 19 20 21 22 23 24 25 26 21 28 29 30 31 32 33 34 35 36 31 38 39 40 41 42 43 44 45 46 41 48 49 50 51 52 53 54 55 56 51 58 59 60 Asynchronous Data Service (ADS) Stage1 -2 I 2 TIA-737 i 2 3 4 5 6 1 8 9 10 II 12 13 14 15 16 11 18 19 20 21 22 23 24 25 26 21 28 29

40、 30 31 32 33 34 35 36 31 38 39 40 41 42 43 44 45 46 41 48 49 50 51 52 53 54 55 56 51 58 59 60 - Voice Then Data An originating party places a voice call to the tei-minating subscriber. The subscribers mobile termination has a single telephone number for both voice and data services. The mobile subsc

41、riber answers the call using voice service and initiates a voice to data sei-vice change. In another case, the originating party infoi-ms the tei-minating mobile subscriber that he or she shall end the current voice call, then call back with a data call. The mobile subscriber manually switches the s

42、ervice fom voice to data service prior to receiving the call. Call Detail Record The system should record call detail information for the following: a. Sei-vice invocation event and time. b. Elapsed time for Voice and ADS. c. Use of the InterWorlting Function (IWF). d. Number of Octets (or Packets).

43、 See IS-I24 for the specific information to be included for each element. 1 .I .2 Exception Procedures or Unsuccessful Outcome Reg ist ration None identified. De-Reg ist rat i on None identified. Activation None identified. De-Activation None identified. Invocation If ADS cannot be established for t

44、he end-to-end call, or if the in progress call is interrupted, the network may clear the call. The originator of the call should be provided an indication that the call has failed. Stage1 -3 Asynchronous Data Service (ADS) TIA-737 Exceptions While Roaming ADS shall not be supported in an analog syst

45、em. Exceptions During Intersystem Handoff ADS shall not be supported in an intersystem handoff to an analog system. 1 .I .3 Alternative Procedures None identified. 1 .I .4 Interactions With Other Wireless Services Asynchronous Data Service (ADS) Not applicable. Call Delivery (CD) *FC may not be supp

46、orted (Permanent Activation option is supported). Call Forwarding-Busy (CFB) *FC may not be supported (Fixed Registration and Permanent supported). Different CFB treatment maybe applied for ADS calls. Call Forwarding-Default (CFD) *FC may not be supported (Fixed Registration and Permanent supported)

47、. Different CFD treatment may be applied for ADS calls. Call Forwarding-No Answer (CFNA) *FC may not be supported (Fixed Registration and Permanent Activation option is Activation option is supported). Different CFNA treatment may be applied for ADS calls. Call Forwarding-Unconditional (CFU) Activat

48、ion option is *FC may not be supported (Fixed Registration and Permanent Activation option is supported). Different CFU treatment may be applied for ADS calls. Call Transfer (CT) ADS does not support CT. 2 3 4 5 6 1 8 9 10 II 12 13 14 15 16 11 18 l9 20 21 22 23 24 25 26 21 28 29 30 31 32 33 34 35 36

49、 31 38 39 40 41 42 43 44 45 46 41 48 49 50 51 52 53 54 55 56 59 60 Asynchronous Data Service (ADS) I 2 Stage1 -4 TIA-737 I 2 3 4 5 6 I 8 9 10 II 12 13 14 15 16 11 18 19 20 21 22 23 24 25 26 21 28 29 30 31 32 33 34 35 36 31 38 39 40 41 42 43 44 45 46 41 48 49 50 51 52 53 54 55 56 51 58 59 60 Call Waiting (CW) CW is not supported when the call (i.e., either the cu-rent or incoming) is laown to be a data call. Calling Name Presentation (CNAP) None identified. Calling Number Identification Presentation (CNIP) None identified. Calling Number Identi

展开阅读全文
相关资源
猜你喜欢
  • SAE AS 50861 1-1998 Wire Electrical Polyvinyl Chloride Insulated Nylon Jacket Tin-Coated Copper Conductor 600-Volt 105 《镀锡铜导体尼龙外壳聚氯乙烯绝缘电线600伏150℃》.pdf SAE AS 50861 1-1998 Wire Electrical Polyvinyl Chloride Insulated Nylon Jacket Tin-Coated Copper Conductor 600-Volt 105 《镀锡铜导体尼龙外壳聚氯乙烯绝缘电线600伏150℃》.pdf
  • SAE AS 50861 2-2001 Wire Electrical Polyvinyl Chloride Insulated PVC-Glass-Nylon Tin-Coated Copper Conductor 600-Volt 105 《600 V和105℃镀锡铜导体PVC玻璃尼龙聚氯乙烯绝缘电线》.pdf SAE AS 50861 2-2001 Wire Electrical Polyvinyl Chloride Insulated PVC-Glass-Nylon Tin-Coated Copper Conductor 600-Volt 105 《600 V和105℃镀锡铜导体PVC玻璃尼龙聚氯乙烯绝缘电线》.pdf
  • SAE AS 50861 3-2001 Wire electrical polyvinyl chloride insulated PVC-glass- PVC-nylon tin-coated copper conductor 600-volt 105C《600 V和105℃镀锡铜导体聚氯乙烯尼龙 聚氯乙烯玻璃和聚氯乙烯绝缘电线[代替 海军MIL-W-50.pdf SAE AS 50861 3-2001 Wire electrical polyvinyl chloride insulated PVC-glass- PVC-nylon tin-coated copper conductor 600-volt 105C《600 V和105℃镀锡铜导体聚氯乙烯尼龙 聚氯乙烯玻璃和聚氯乙烯绝缘电线[代替 海军MIL-W-50.pdf
  • SAE AS 50861 4-2001 Wire Electrical Polyvinyl Chloride Insulated Nylon Jacket Tin-Coated Copper Conductor 3000-Volt 105 《3000 V和105℃镀锡铜导体尼龙套聚氯乙烯绝缘电线》.pdf SAE AS 50861 4-2001 Wire Electrical Polyvinyl Chloride Insulated Nylon Jacket Tin-Coated Copper Conductor 3000-Volt 105 《3000 V和105℃镀锡铜导体尼龙套聚氯乙烯绝缘电线》.pdf
  • SAE AS 50861 5-2001 Wire electrical polyvinyl chloride insulated polyvinylidene fluoride jacket tin-coated copper conductor 600- volt 110C《600 V和110℃镀锡铜导体聚偏氟乙烯套聚氯乙烯绝缘电线》.pdf SAE AS 50861 5-2001 Wire electrical polyvinyl chloride insulated polyvinylidene fluoride jacket tin-coated copper conductor 600- volt 110C《600 V和110℃镀锡铜导体聚偏氟乙烯套聚氯乙烯绝缘电线》.pdf
  • SAE AS 50861 6-2001 Wire electrical polyvinyl chloride insulated polyvinylidene fluoride jacket silver-coated copper alloy conductor 600-volt 110C《600 V和110℃镀银铜合金导线聚偏氟乙烯封套和聚氯乙烯绝缘电线.pdf SAE AS 50861 6-2001 Wire electrical polyvinyl chloride insulated polyvinylidene fluoride jacket silver-coated copper alloy conductor 600-volt 110C《600 V和110℃镀银铜合金导线聚偏氟乙烯封套和聚氯乙烯绝缘电线.pdf
  • SAE AS 50861 7-1998 Wire Electrical Polyvinyl Chloride Insulated Nylon Jacket Tin-Coated Copper Conductor Medium Weight 600-Volt 105 《FSC 6145 105℃和600 V中等重量的镀锡铜导体尼龙套聚氯乙烯绝缘电线》.pdf SAE AS 50861 7-1998 Wire Electrical Polyvinyl Chloride Insulated Nylon Jacket Tin-Coated Copper Conductor Medium Weight 600-Volt 105 《FSC 6145 105℃和600 V中等重量的镀锡铜导体尼龙套聚氯乙烯绝缘电线》.pdf
  • SAE AS 50861A-2011 Wire Electric Polyvinyl Chloride Insulated Copper or Copper Alloy《聚氯乙烯包裹铜和铜合金电线》.pdf SAE AS 50861A-2011 Wire Electric Polyvinyl Chloride Insulated Copper or Copper Alloy《聚氯乙烯包裹铜和铜合金电线》.pdf
  • SAE AS 5104A-2004 Plugs Port Connection Ring Locked AS1300 Port Installation and Removal of《锁紧环的AS1300油口的连接插塞的安装和拆除》.pdf SAE AS 5104A-2004 Plugs Port Connection Ring Locked AS1300 Port Installation and Removal of《锁紧环的AS1300油口的连接插塞的安装和拆除》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1