1、 ANSI/TIA-758-A-2004 Approved: May 5, 2004 TIA STANDARD Customer-owned Outside Plant Telecommunications Infrastructure Standard TIA-758-A (Revision of TIA/EIA-758 and TIA/EIA-758-1) AUGUST 2004 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with t
2、he Electronic Industries Alliance Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and Publications are designed to serve the public interest thr
3、ough eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publicatio
4、ns shall not in any respect preclude any member or nSon-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or inter
5、nationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publicati
6、on. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations
7、 before its use. (From Standards Proposal No. 3-3339-RV1-A, formulated under the cognizance of the TIA TR-42.4 Subcommittee Customer-Owned Outside Plant Telecommunications Infrastructure) Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2004 Standards and Technology Department 2500 Wilson Boulev
8、ard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search online at http:/www.tiaonline.org/s
9、tandards/search_n_order.cfm All rights reserved Printed in U.S.A. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Re
10、production of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details
11、on how to request permission. Details are located at: http:/www.tiaonline.org/about/faqDetail.cfm?id=18 OR Telecommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) th
12、e Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA make
13、s no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obl
14、igation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonab
15、le or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect,
16、test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS
17、FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY
18、APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE
19、OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE)
20、, PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS.Copyright Telecommunications Industry Associat
21、ion Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA -758-A CUSTOMER-OWNED OUTSIDE PLANT TELECOMMUNICATIONS INFRASTRUCTURE STANDARD Table of Contents FOREWORD .VI INTRODUCTION 1 GENERAL1 PURPOSE1 MANDATORY AND ADVISORY TERMS
22、 .1 METRIC EQUIVALENTS OF US CUSTOMARY UNITS1 LIFE OF THE STANDARD .1 1 SCOPE2 1.1 APPLICABILITY2 1.2 CUSTOMER-OWNED OSP CABLING INFRASTRUCTURE 2 1.2.1 Pathways and spaces.2 1.2.2 Customer-owned OSP cabling .2 1.3 NORMATIVE REFERENCES .5 2 DEFINITIONS, ABBREVIATIONS AND ACRONYMS, WEIGHTS AND MEASURE
23、S, SYMBOLS8 2.1 DEFINITIONS.8 2.2 ABBREVIATIONS AND ACRONYMS .12 2.3 WEIGHTS AND MEASURES .13 2.4 SYMBOLS .13 3 CABLING INFRASTRUCTURE14 3.1 GENERAL .14 3.2 TOPOLOGY.14 3.3 RECOGNIZED CABLES .17 3.4 CHOOSING MEDIA .17 3.5 BONDING AND GROUNDING17 4 PATHWAYS AND SPACES .18 4.1 PATHWAYS.18 4.1.1 Subsur
24、face pathways18 4.1.1.1 General 18 4.1.1.2 Conduit/duct.18 4.1.1.2.1 General 18 4.1.1.2.2 Conduit type.18 4.1.1.2.3 Lengths between pulling points .19 4.1.1.2.4 Bends.19 4.1.1.2.5 Number of bends .19 4.1.1.2.6 Drain slope.19 4.1.1.2.7 Innerduct19 4.1.1.2.8 Duct plugs20 4.1.1.2.9 Bridge crossings 20
25、4.1.1.3 Utility tunnels .20 4.1.1.3.1 General 20 4.1.1.3.2 Planning.21 4.1.2 Direct-buried .21 4.1.3 Aerial pathways.22 i Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-4.1.3.1
26、 General 22 4.2 SPACES. 22 4.2.1 Maintenance holes . 22 4.2.1.1 General 22 4.2.1.2 Location. 24 4.2.1.3 Type 26 4.2.1.4 Sizing. 26 4.2.1.5 Covers. 26 4.2.2 Handholes 26 4.2.2.1 General 26 4.2.2.2 Location. 27 4.2.2.3 Sizing. 27 4.2.2.4 Covers. 28 4.2.3 Pedestals and cabinets 28 4.2.3.1 General 28 4.
27、2.3.2 Ground level pedestals and cabinet criteria 28 4.2.3.2.1 Installation requirements . 28 4.2.3.3 Pole or wall mounted cabinets 29 4.2.3.4 Environmentally controlled cabinets . 29 4.2.4 Vaults 29 4.2.4.1 Vault criteria 29 4.2.4.2 Installation requirements. 30 5 CABLING 31 5.1 TWISTED-PAIR CABLIN
28、G 31 5.1.1 Twisted-pair cable 31 5.1.1.1 General 31 5.1.1.2 Cable performance 31 5.1.1.3 Cable construction types. 31 5.1.1.4 Aerial (self-support and lashed) 31 5.1.1.5 Buried service wire 32 5.1.1.6 Aerial service wire . 32 5.1.1.7 Screened cable (internally) . 32 5.1.2 OSP twisted-pair connecting
29、 hardware 32 5.1.2.1 General 32 5.1.2.2 Environmental compatibility 32 5.1.2.3 Materials 32 5.1.2.4 Transmission. 32 5.1.2.5 Terminal block requirements. 33 5.1.2.5.1 General 33 5.1.2.5.2 Wire compatibility 33 5.1.2.5.3 Wire pair identification. 33 5.1.2.5.4 Test points. 33 5.1.2.5.5 Mounting 33 5.1
30、.2.5.6 Stub cable . 33 5.1.2.6 Cross-connect block requirements . 33 5.1.2.6.1 General 33 5.1.2.6.2 Wire compatibility 34 5.1.2.6.3 Wire pair identification. 34 5.1.2.6.4 Wire termination 34 5.1.2.6.5 Test points. 34 5.1.2.6.6 Terminal density 34 5.1.2.6.7 Wiring harness 34 5.1.2.7 Building entrance
31、 terminals. 34 5.1.2.7.1 General 34 5.1.2.7.2 Non-protected terminals 34 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA -758-A 5.1.2.7.3 Protected terminals34 5.1.2.8 Splic
32、ing connectors35 5.1.2.8.1 General 35 5.1.2.8.2 Materials 36 5.1.2.8.3 Transmission .36 5.1.2.8.4 Tensile strength .37 5.1.2.8.5 Insulation resistance37 5.1.2.8.6 Salt fog exposure.37 5.1.3 OSP twisted-pair cross-connect jumpers37 5.1.4 Additional installation requirements37 5.1.4.1 Cable splices fo
33、r BBOSP.37 5.1.4.2 Bridge-taps 38 5.1.4.3 Binder group integrity 38 5.1.4.4 Cable bend radius38 5.1.5 OSP twisted-pair testing .38 5.2 COAXIAL CABLING.38 5.2.1 General .38 5.2.2 75 coaxial cable 38 5.2.2.1 General 38 5.2.2.2 Cable performance 38 5.2.3 75 coaxial connecting hardware .39 5.2.3.1 Gener
34、al 39 5.2.4 75 coaxial cable installation requirements 39 5.2.5 75 coaxial cable testing.39 5.3 OPTICAL FIBER CABLING39 5.3.1 General .39 5.3.2 Optical fiber cable performance39 5.3.3 Optical fiber cable construction types.39 5.3.3.1 Duct cables40 5.3.3.2 Armored cables40 5.3.3.3 Aerial cables 40 5.
35、3.3.3.1 Self-supporting cables .40 5.3.3.3.1.1 Figure 8 cables .40 5.3.3.3.1.2 All-dielectric, self-supporting cables .40 5.3.3.4 Indoor/outdoor cables40 5.3.3.5 Drop cables41 5.3.4 Optical fiber connecting hardware 41 5.3.4.1 Optical fiber splicing.41 5.3.4.1.1 Splicing methods .41 5.3.4.1.1.1 Fusi
36、on splicing41 5.3.4.1.1.2 Mechanical splicing.41 5.3.4.1.2 Attenuation.41 5.3.4.1.3 Return loss.41 5.3.4.1.4 Mechanical protection42 5.3.4.2 Optical fiber connectors.42 5.3.5 Cabling Practices42 5.3.6 Optical fiber patch cords and cross-connect jumpers.43 5.3.7 Optical fiber cable installation requi
37、rements.43 5.3.8 Optical fiber cable testing .43 5.3.8.1 OTDR testing.43 5.3.9 Optical fiber inside terminals.43 5.3.9.1 General 43 5.3.9.2 Fiber storage and organizing housings .43 5.3.9.3 Fiber distribution units utilizing optical fiber connectors 43 5.3.9.4 Fiber distribution units utilizing fibe
38、r splicing techniques.44 5.3.9.5 Fiber splice module housing44 iii Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-5.4 PRESSURIZATION OF AIR-CORE CABLES. 44 5.4.1 General. 44 6
39、CABLING HARDWARE . 45 6.1 GENERAL. 45 6.2 MATERIALS 45 6.3 COPPER TWISTED-PAIR SPLICE CLOSURES 45 6.3.1 General. 45 6.3.2 Common test for copper closures 45 6.3.3 Aerial copper closures/terminals 46 6.3.3.1 Application. 46 6.3.3.2 Special testing. 46 6.3.4 Buried service wire copper closures. 47 6.3
40、.4.1 Application. 47 6.3.4.2 Special tests 47 6.3.5 Buried/underground/vault copper splice closures 47 6.3.5.1 Splice configurations. 47 6.3.5.2 Closure housing 48 6.3.5.3 Installation requirements. 48 6.3.5.4 Special tests 48 6.4 OPTICAL FIBER. 48 6.4.1 General. 48 6.4.2 Optical fiber splice closur
41、e . 49 6.4.2.1 General 49 6.4.2.2 Application. 49 6.4.2.3 Criteria. 50 6.4.2.3.1 Splice configurations . 50 6.4.2.3.2 Common tests . 51 6.4.2.3.3 Installation requirements . 51 6.4.2.4 Free-breathing optical fiber closures. 51 6.4.2.4.1 Special testing. 51 6.4.2.4.2 Sealed aerial closures. 52 6.4.2.
42、4.3 Vented aerial closures. 52 6.4.2.5 Underground closures. 52 6.4.2.6 Direct-buried closures . 52 6.4.2.6.1 Special tests 52 6.4.2.7 Shield isolation/grounding closure 53 6.4.2.8 Pedestal optical fiber closure 53 6.4.2.8.1 Special tests 53 ANNEX A (NORMATIVE) OSP SYMBOLS 54 A.1 GENERAL. 54 ANNEX B
43、 (INFORMATIVE) TYPICAL OSP CABLING LENGTHS FOR SPECIFIC APPLICATIONS. 60 B.1 GENERAL. 60 ANNEX C (INFORMATIVE) OSP OPTICAL FIBER CABLING PRACTICES 64 ANNEX D (INFORMATIVE) BIBLIOGRAPHY AND REFERENCES . 68 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for
44、 ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA -758-A List of Tables Table 1 Areas of OSP and BBOSP cabling applications 31 Table 2 Test sequence for twisted-pair splicing connectors .36 Table 3 Optical fiber cable placement recommendations .40 Table 4 References for
45、 copper closures common test methods.45 Table 5 References for aerial copper closures/terminals test methods 46 Table 6 References for buried service wire copper closures test methods 47 Table 7 References for buried/underground/vault copper splice closures test methods 48 Table 8 References for opt
46、ical fiber closures common test methods .51 Table 9 References for free-breathing optical fiber splice closures test methods 52 Table 10 References for direct-buried optical fiber splice closures test methods.53 Table 11 References for pedestal optical fiber closure test methods .53 Table 12 Typical
47、 OSP twisted-pair cable lengths for specific applications .61 Table 13 Supportable distances and channel attenuation for optical fiber applications by fiber type.62 List of Figures Figure 1 Typical customer-owned OSP elements.3 Figure 2 Typical customer-owned OSP link 4 Figure 3 Example of campus st
48、ar topology.15 Figure 4 Example campus/building cable topology.16 Figure 5 Example of innerduct.20 Figure 6 Typical utility tunnel section 21 Figure 7 Maintenance hole24 Figure 8 Maintenance hole placement at an intersection25 Figure 9 Handhole .27 Figure 10 Discrete and multiple pair connectors.35
49、Figure 11 Example in-line and butt splice .37 Figure 12 Example of a mechanical splice41 Figure 13 Position A and B configuration on a 568SC outlet/connector and adapter.42 Figure 14 Typical optical fiber splice closure used in the OSP .49 Figure 15 Outside plant fiber optic cross-over configuration.64 Figure 16 Building termination of OSP cable and interconnection to e
