TIS 1535-1998 Cashew kernels《腰果仁》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AS 6098-2011 FITTING TEE STANDARD AND REDUCER BULKHEAD ON RUN INTERNAL ON SIDE FLARED 37 PHERICAL《37球面扩口直通内部侧面隔板标准和缩径三通管接头》.pdf

SAE AS 6099-2011 FITTING ELBOW 90 STANDARD AND REDUCER FLARED 37 PHERICAL《37球形外展标准和减径90弯头配件》.pdf

SAE AS 6102-2011 FITTING TEE STANDARD AND REDUCER BULKHEAD ON SIDE FLARED 37 DEGREE SPHERICAL《37球星扩口侧面有隔壁的标准和变径型三通接头》.pdf

SAE AS 6103-2011 FITTING CROSS STANDARD AND REDUCER 37 PHERICAL FLARED《扩口球形37标准和异径管四通接头》.pdf

SAE AS 6104-2012 FITTING ELBOW 45 DEGREES STANDARD AND REDUCER 37 DEGREES SPHERICAL FLARED《37度球形扩口标准和减径管45度弯头配件》.pdf

SAE AS 6105-2011 FITTING TEE STANDARD AND REDUCER 37 PHERICAL FLARED《扩口球形37标准和异径管三通接头》.pdf

SAE AS 6106A-2014 FITTING ASSEMBLY STRAIGHT EXTENDED BULKHEAD SHANK FLARELESS AXIALLY SWAGED HYDRAULIC 5080 PSI《液压5080 PSI轴向锻造无闪光扩展舱柄适配组装件》.pdf

SAE AS 6107A-2014 FITTING ASSEMBLY STRAIGHT EXTENDED BULKHEAD SHANK FLARELESS AXIALLY SWAGED HYDRAULIC 3000 PSI《3000 PSI液压轴向挤压无光点延伸舱壁柄的直配件总成》.pdf

SAE AS 6116-2011 Aluminum Fittings Axially Swaged Tube with Flareless Separable Fluid System Up to 1500 psi (10 340 kPa) Maximum Specification for《最大为1500 psi(10 340 kPa)液体系统中使用的带有.pdf