TIS 756-1988 Standard for cylindrical locks《圆柱形门锁标准》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SIS SS 16 67 06-1980 Plastics - Determination of the maximum temperature and the rate of increase of temperature during the setting of unsaturated polyester resins《塑料 不饱和聚酯树脂装配的最高温.pdf

SIS SS 16 67 06-1986 Plastics - Unsaturated polyester resins - Determination of reactivity at 80 C (conventional method)《塑料 不饱和聚酯树脂80 ℃的反应性测定（常规方法）》.pdf

SIS SS 16 67 07-1979 Plastics Unsaturated resins Measurement of geltime at 25 C《塑料 不饱和树脂 25 C时的胶质测定》.pdf

SIS SS 16 67 11-1979 Thermoset polyester moulding compounds《酯塑料 热固性聚酯模塑化合物》.pdf

SIS SS 16 67 12-1979 Thermoset polyester sheet moulding compounds《酯塑料 热固性聚酯片状摸塑料》.pdf

SIS SS 16 67 20-1979 Thermoset polyester moulding materials General information《热固性聚酯成型材料 一般信息》.pdf

SIS SS 16 84 01-1980 Plastics - Preparation of glass fibre reinforced resin bonded low-pressure laminated plates or panels for test purposes《塑料 测试用玻璃纤维增强树脂粘结低气压层合板或面板的制备》.pdf

SIS SS 16 84 05-1982 Glass reinforced plastics - Measurement of hardness by means of a Barcol im pressor《玻璃纤维增强塑料 巴科尔硬度仪测定硬度》.pdf

SIS SS 16 84 46-1980 Textile glass reinforced plastics - Deter- mination of loss of ignition《纺织玻璃纤维增强塑料 灼烧减量的测定》.pdf