TR 32-2012 Technical reference for recreational diving.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

KS M ISO 2470-2-2009 Paper board and pulps－Measurement of diffuse blue reflectance factor－Part 2：Outdoor daylight conditions(D65 brightness)《纸、纸板和纸浆 蓝光漫散射系数的测量 第2部分 室外日光条件(D65照明度)》.pdf

KS M ISO 2471-2009 Paper and board－Determination of opacity(paper backing)－Diffuse reflectance method《纸和纸板 不透明度(纸衬底)的测定 漫反射法》.pdf

KS M ISO 24999-2010 Flexible cellular polymeric materials－Determination of fatigue by a constant-strain procedure《软质泡沫聚合材料 使用恒定应变程序测定疲劳度》.pdf

KS M ISO 2507-1-2005 Thermoplastics pipes and fittings－Vicat softening temperature－ Part 1：General test method《热塑性塑料管材和管件 维卡软化温度 第1部分 一般试验方法》.pdf

KS M ISO 251-2007 Conveyor belts with textile carcass－Widths and lengths《带纺织物绕线架的输送 宽度和长度》.pdf

KS M ISO 2535-2010 Plastics－Unsaturated-polyester resins－Measurement of gel time at ambient temperature《塑料 不饱和聚酯树脂室温时胶凝时间的测量》.pdf

KS M ISO 25477-2009 Paper board and pulps－Basic guidelines for image analysis measurements《纸、纸板和纸浆 物象分析测量用基础指南》.pdf

KS M ISO 25518-2012 Single-use rubber gloves for general applications－Specification《通用一次性橡胶手套 要求事项》.pdf

KS M ISO 2554-2010 Plastics－Unsaturated polyester resins－Determination of hydroxyl value《塑料 不饱和聚酯树脂 羟基值的测定》.pdf