TS 252-1965 METHOD OF DETERMINING THE VVIDTH AND THE LENGTH OF THE CLOTH《确定布宽度和长度的方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SANS 285-2010 Calcium silicate masonry units《硅酸钙砌块》.pdf

SANS 28500-2009 Information and documentation - WARC file format《信息和文献 WARC文件格式》.pdf

SANS 2859-1-2004 Sampling procedures for inspection by attributes Part 1 Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection《按属性检查的取样程序 第1部分 按照验收质量.pdf

SANS 2859-10-2008 Sampling procedures for inspection by attributes Part 10 Introduction to the ISO 2859 series of standards for sampling for inspection by attributes《按属性检查抽样程序 第10部.pdf

SANS 2859-3-2008 Sampling procedures for inspection by attributes Part 3 Skip-lot sampling procedures《属性检验用抽样程序 第3部分 箕斗式取样程序》.pdf

SANS 2859-4-2008 Sampling procedures for inspection by attributes Part 4 Procedures for assessment of declared quality levels《按属性检查抽样程序 第4部分 检查程序 宣称质量水平评价程序》.pdf

SANS 2859-5-2008 Sampling procedures for inspection by attributes Part 5 System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection《按属性.pdf

SANS 286-1-1988 ISO system of limits and fits Part 1 Bases of tolerances deviations and fits《ISO极限和配合制度 第1部分：容差、偏差以及配合的基点》.pdf

SANS 286-2-1988 ISO system of limits and fits Part 2 Tables of standard tolerance grades and limit deviations for holes and shafts《ISO极限和配合制度 第2部分：孔和轴的标准容差等级和极限偏差表》.pdf