TS 3070-1978 Dried Milk - Determination Of Lactic Acid And Lactates Content《奶粉 乳酸和乳酸盐含量的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 22195-1983 Buffer lower washers for sheet stamping dies Design and dimensions《板材冲模用缓冲器下垫圈 结构及尺寸》.pdf

GOST 22196-1983 Buffer washers for sheet stamping dies Design and dimensions《板材冲模用缓冲器垫板 结构及尺寸》.pdf

GOST 22197-1983 Buffer rods for sheet stamping dies Design and dimensions《板材冲模用缓冲器活塞杆 结构及尺寸》.pdf

GOST 22198-1983 Buffer hollow rods for sheet stamping dies Design and dimensions《板材冲模用缓冲器用空心杆 结构及尺寸》.pdf

GOST 22199-1983 Buffer holders for sheet stamping dies Design and dimensions《板材冲模用缓冲器座 结构及尺寸》.pdf

GOST 22200-1983 Buffer holders with body size hole for sheet stamping dies Design and dimensions《板材冲模用带凹下孔的缓冲器座 结构及尺寸》.pdf

GOST 22201-1983 Polyurethane compression springs for sheet stamping dies Design and dimensions《板材冲模用聚氨酯弹簧 结构及尺寸》.pdf

GOST 22202-1983 Buffers and buffers holders for sheet stamping dies Specifications《板材冲模用缓冲器支座及缓冲器 技术条件》.pdf

GOST 22212-1985 Radioisotope power devices Terms and definitions《放射性同位素电源 术语和定义》.pdf