TS 653-1968 CHEMICAL ANALYSIS OF STEELS DETERMINATION OF MANGANESE (SPECTROPHOTOMETRIC METHOD)《钢化学分析　锰的测定 （分光光度法）》.pdf

相关资源

JIS G1602-1998 铁合金化学分析取样方法(第2部分钨铁、钼铁、钒铁、钛铁和铌铁合金).pdf

JIS G1603-1985 合金化学分析的取样方法(第3部分 磷铁、金属锰、金属硅、金属铬、硅钙及硼铁合金).pdf

JIS H6202-1986 化学分析用铂蒸发器.pdf

JIS G1326-2000 镍铁化学分析方法-解释.pdf

JIS G1301-1987 铁合金化学分析方法通则.pdf

JIS G1320-1968 磷铁化学分析方法.pdf

JIS H6201-1986 化学分析用铂坩埚.pdf

JIS H1012-2001 铜及铜合金的化学分析方法通则.pdf

JIS H1402-2001 钨粉及碳化钨粉的化学分析方法.pdf

JIS H1402-2006 钨粉及碳化钨粉的化学分析方法(修改件1).pdf

猜你喜欢

NASA-TN-D-5153-1969 The use of pilot rating in the evaluation of aircraft handling qualities《飞机飞行品质评估对飞行员评级的使用》.pdf

NASA-TN-D-5204-1999 Pressure distributions on 140 degrees 160 degrees and 180 degrees cones at Mach numbers from 2 30 to 4 63 and angles of attack from 0 degrees to 20 degrees《当马赫数.pdf

NASA-TN-D-523-1960 Investigation of the flow in a rectangular cavity in a flat plate at a mach number of 3 55《当马赫数为3 55时 平板中举行空腔中气流的研究》.pdf

NASA-TN-D-5361-1969 Analysis of lateral-directional stability characteristics of a twin-jet fighter airplane at high angles of attack《在高攻角时 双喷气战斗机的横向航向稳定特性的分析》.pdf

NASA-TN-D-5364-1969 Wind-tunnel investigation of an STOL aircraft configuration equipped with an external-flow jet flap《装配有外流喷气襟翼的短距离起落飞机结构的风洞研究》.pdf

NASA-TN-D-5390-1969 Effect of stress ratio on fatigue-crack growth in 7075-T6 and 2024-T3 aluminum-alloy specimens《应力比对7075-T6和2024-T3铝合金样品疲劳裂缝扩展的影响》.pdf

NASA-TN-D-5392-1969 Experimental pressure distributions for a family of blunt bodies at Mach numbers from 2 49 to 4 63 and angles of attack from 0 degrees to 15 degrees《当马赫数为2 49至4.pdf

NASA-TN-D-5408-1969 Static and dynamic stability derivatives of a model of a jet transport equipped with external-flow jet-augmented flaps《装配有外流喷气扩张襟翼喷气运输机模型的静态和动态稳定性导数》.pdf

NASA-TN-D-5467-1969 Discharge coefficients for thick plate orifices with approach flow perpendicular and inclined to the orifice axis《带有和孔口轴垂直和倾向于孔口轴的迎风气流厚板孔口的流量系数》.pdf