1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 60730-2-11 Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Energy RegulatorsUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION O
2、R DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Energy Regulators, UL 60730-
3、2-11 Second Edition, Dated November 13, 2013 Summary of Topics These revisions are being issued to reect the established effective date for UL 60730-2-11. AS OF OCTOBER 19, 2018, THE FIRST EDITION OF UL 60730-2-11A AND THE TWELFTH EDITION OF UL 873 WILL BE WITHDRAWN AND WILL BE REPLACED BY THIS STAN
4、DARD. Text that has been changed in any manner or impacted by ULs electronic publishing system is marked with a vertical line in the margin. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanic
5、al photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any
6、special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage
7、. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, cla
8、im, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, gures, and/o
9、r other elements of the Standard having future effective dates as indicated in the preface. The prior text for requirements that have been revised and that have a future effective date are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. The following table lists the
10、 future effective dates with the corresponding reference. MAY 27, 2014 UL 60730-2-11 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Future Effective Date Reference October 19, 2018 Second Edition MAY 27, 2014 UL 60730-2-11 tr2UL COPYRIGH
11、TED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL November 13, 2013 (Title Page Reprinted: May 27, 2014) 1 UL 60730-2-11 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Energy Regulators Prior
12、 to the second edition of UL 60730-2-11, the requirements for the products covered by this Standard were included in UL 60730-2-11A. First Edition February, 2002 Second Edition November 13, 2013 This ANSI/UL Standard for Safety consists of the Second Edition dated November 13, 2013. The most recent
13、designation of ANSI/UL 60730-2-11 as an American National Standard (ANSI) occurred on November 13, 2013. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page, Preface, or effective date information. The National Difference Page and IEC Foreword are also exclude
14、d from the ANSI approval of IEC-based standards. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. ULs Standards for Safe
15、ty are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2014 UNDERWRITERS LABORATORIES INC. ANSI
16、/UL 60730-2-11-2013UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL NOVEMBER 13, 2013 UL 60730-2-11 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Pref
17、ace (UL) 6 NATIONAL DIFFERENCES .7 FOREWORD 8 1 Scope and normative references .11 2 Denitions 12 2.2 Denitions of types of controls according to purpose .12 2.5 Denitions of type of control according to construction .12 3 General requirements 12 4 General notes on tests .12 5 Rating 12 6 Classicati
18、on 13 6.4 According to features of automatic action .13 6.7 According to ambient temperature limits of the switch head .13 7 Information 13 8 Protection against electric shock .13 9 Provision for protective earthing .13 10 Terminals and terminations 13 11 Constructional requirements 13 11.3.9 Pull-c
19、ord actuated control 13 11.4 Actions 14 12 Moisture and dust resistance .14 13 Electric strength and insulation resistance .14 14 Heating 14 14.101 Energy regulators for use in or on cooking appliances 14 15 Manufacturing deviation and drift .15 16 Environmental stress 15 17 Endurance .15 17.16 Test
20、s for particular purpose controls .15 18 Mechanical strength .16 18.101 Push-and-turn or pull-and-turn actuation 16 19 Threaded parts and connections 17 20 Creepage distances, clearances and distances through solid insulation .17 21 Resistance to heat, re and tracking 17 22 Resistance to corrosion 1
21、7 23 Electromagnetic compatibility (EMC) requirements emission 17 24 Components .17 25 Normal operation .17 26 Electromagnetic compatibility (EMC) requirements immunity .17 27 Abnormal operation .17 28 Guidance on the use of electronic disconnection .18 NOVEMBER 13, 2013 UL 60730-2-11 3UL COPYRIGHTE
22、D MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Figures Annexes Annex H (normative) Requirements for electronic controls H.6 Classication 20 H.6.18 According to software class 20 H.26 Electromagnetic compatibility (EMC) requirements immunity .20 H.26.5 V
23、oltage dips and voltage interruptions in the power supply network 20 H.26.8 Surge immunity test 20 H.26.9 Electrical fast transient/burst test .21 H.26.12 Radio-frequency electromagnetic eld immunity .21 H.26.15 Evaluation of compliance .21 H.27 Abnormal operation .22 Annex 11.DVE Manufacturing and
24、Production Tests (normative) NOVEMBER 13, 2013 UL 60730-2-11 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL NOVEMBER 13, 2013 UL 60730-2-11 5 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTI
25、ON WITHOUT PERMISSION FROM UL Preface (UL) This UL Standard, UL 60730-2-11, Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Energy Regulators, is to be used in conjunction with UL 60730-1. The requirements for electric actuators are conta
26、ined in this part 2 standard and UL 60730-1. Requirements of this Part 2 Standard, where stated, amend the requirements of UL 60730-1. Where a particular subclause of UL 60730-1 is not mentioned in UL 60730-2-11, the UL 60730-1 subclause applies. The text, gures and tables of the IEC Standard for Au
27、tomatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Energy Regulators, 60730-2-11, copyright 2006, are used in this Standard with the consent of the IEC and the American National Standards Institute (ANSI). The IEC copyrighted material has been reproduced w
28、ith permission from ANSI. ANSI should be contacted regarding the reproduction of any portion of the IEC material. The IEC Foreword and Introduction are not a part of the requirements of this Standard but are included for information purposes only. Copies of IEC Publication 60730-2-11 may be purchase
29、d from ANSI, 25 West 43rd Street, 4th Floor, New York, NY 10036, (212) 642-4900. Note Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the Standard to judge its suitability for their particul
30、ar purpose. These materials are subject to copyright claims of IEC and UL. No part of this publication may be reproduced in any form, including an electronic retrieval system, without the prior written permission of UL. All requests pertaining to the UL 60730-2-11 standard should be submitted to UL.
31、 UL effective date The effective date for UL 60730-2-11, second edition, is October 19, 2018. A UL effective date is one established by Underwriters Laboratories Inc. and is not part of the ANSI approved standard. MAY 27, 2014 UL 60730-2-11 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODU
32、CTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL NATIONAL DIFFERENCES GENERAL National Differences from the text of International Electrotechnical Commission (IEC) Publication 60730-2-11, Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Energy Regulato
33、rs, copyright 2006, are indicated by notations (differences) and are presented in bold text. There are ve types of National Differences as noted below. The difference type is noted on the rst line of the National Difference in the standard. The standard may not include all types of these National Di
34、fferences. DR These are National Differences based on the national regulatory requirements. D1 These are National Differences which are based on basic safety principles and requirements, elimination of which would compromise safety for consumers and users of products. D2 These are national differenc
35、es from IEC requirements based on existing safety practices. These requirements reect national safety practices, where empirical substantiation (for the IEC or national requirement) is not available or the text has not been included in the IEC standard. DC These are National Differences based on the
36、 component standards and will not be deleted until a particular component standard is harmonized with the IEC component standard. DE These are National Differences based on editorial comments or corrections. Each national difference contains a description of what the national difference entails. Typ
37、ically one of the following words is used to explain how the text of the national difference is to be applied to the base IEC text: Addition / Add - An addition entails adding a complete new numbered clause, subclause, table, gure, or annex. Addition is not meant to include adding select words to th
38、e base IEC text. Modication / Modify - A modication is an altering of the existing base IEC text such as the addition, replacement or deletion of certain words or the replacement of an entire clause, subclause, table, gure, or annex of the base IEC text. Deletion / Delete - A deletion entails comple
39、te deletion of an entire numbered clause, subclause, table, gure, or annex without any replacement text. NOVEMBER 13, 2013 UL 60730-2-11 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTERNATIONAL ELECTROTECHNICAL COMMISSION AUTOMATIC ELE
40、CTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE Part 2-11: Particular Requirements for Energy Regulators FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The o
41、bject of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic elds. To this end and in addition to other activities, IEC publishes International Standards, Technical Specications, Technical Reports, Publicly Available Specications
42、(PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and nongovernmental organizations liaising w
43、ith the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as
44、nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in
45、that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Commit
46、tees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking pr
47、ocedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or a
48、gents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use o
49、f, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60730-2-11
