UNE 11-019 Pt 3-1989 《木质家具涂层的试验方法 表面对干燥热量的抗性》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

TCVN 5867-2009 Lifts Cabins counterweights guide rails Safety requirements《电梯 座舱 对重装置 导轨 安全要求》.pdf

TCVN 5868-2009 Non-destructive testing Qualification and certification of personnel《无损检测 无损检测人员的资格鉴定与认证》.pdf

TCVN 5869-2010 Radiation protection Apparatus for industrial gamma radiography Specifications for performance design and tests《辐射防护 辐射防护 工业用γ辐射照相仪器 性能 设计和试验规范》.pdf

TCVN 5870-1995 Non-destructive testing Penetrative crack detectors General technical requirements《无损检测 插入式裂纹探测仪 一般技术要求》.pdf

TCVN 5871-2010 Photography Industrial radiographiq films (roll and sheet) and metal intensifying screens Dimensions《摄影 工业射线底片(胶卷和胶片)与金属增感屏 尺寸》.pdf

TCVN 5872-1995 Photography Industrial radiographic film Determination of ISO speed and average gradient when exposed to X- and Gama-radiation《摄影 工业射线底片 暴露至X和γ射线中时的ISO速度和平均斜率测定》.pdf

TCVN 5873-1995 Welds in steel Reference block for the calibration of equipment for ultrasonic examination《钢中的焊缝 用于超声波检查的设备校准用参考试块》.pdf

TCVN 5874-1995 Recommended practice for the X ray inspection of fusion welded butt joints for aluminium and its alloys and magnesium and its alloys 5 to 50 mm thick《厚度5mm至50mm的铝及铝合.pdf

TCVN 5875-1995 Radiographic inspection of resistance spot welds for alumium and its alloys Recommended practice《铝和铝合金电阻点焊的射线照相检验 推荐规程》.pdf