1、01-11 01 57 19- 1 SECTION 01 57 19 TEMPORARY ENVIRONMENTAL CONTROLS SPEC WRITER NOTE: Refer to and edit this Section per the environmental protection actions required and identified in the specific project mitigation memorandum on file with the Project Director. Delete or add information between /-/
2、 and any other items applicable to project. Renumber the paragraphs as applicable. PART 1 - GENERAL 1.1 DESCRIPTION A. This section specifies the control of environmental pollution and damage that the Contractor must consider for air, water, and land resources. It includes management of visual aesth
3、etics, noise, solid waste, radiant energy, and radioactive materials, as well as other pollutants and resources encountered or generated by the Contractor. The Contractor is obligated to consider specified control measures with the costs included within the various contract items of work. B. Environ
4、mental pollution and damage is defined as the presence of chemical, physical, or biological elements or agents which: 1. Adversely effect human health or welfare, 2. Unfavorably alter ecological balances of importance to human life, 3. Effect other species of importance to humankind, or; 4. Degrade
5、the utility of the environment for aesthetic, cultural, and historical purposes. C. Definitions of Pollutants: 1. Chemical Waste: Petroleum products, bituminous materials, salts, acids, alkalis, herbicides, pesticides, organic chemicals, and inorganic wastes. 2. Debris: Combustible and noncombustibl
6、e wastes, such as leaves, tree trimmings, ashes, and waste materials resulting from construction or maintenance and repair work. 3. Sediment: Soil and other debris that has been eroded and transported by runoff water. 4. Solid Waste: Rubbish, debris, garbage, and other discarded solid materials resu
7、lting from industrial, commercial, and agricultural operations and from community activities. 5. Surface Discharge: The term “Surface Discharge“ implies that the water is discharged with possible sheeting action and subsequent soil erosion may occur. Waters that are surface discharged may terminate
8、in drainage ditches, storm sewers, creeks, and/or “water of the Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-01-11 01 57 19- 2 United States“ and would require a permit to discharge water from the governing agency. 6. Rubbish: Combustible and nonc
9、ombustible wastes such as paper, boxes, glass and crockery, metal and lumber scrap, tin cans, and bones. 7. Sanitary Wastes: a. Sewage: Domestic sanitary sewage and human and animal waste. b. Garbage: Refuse and scraps resulting from preparation, cooking, dispensing, and consumption of food. 1.2 QUA
10、LITY CONTROL A. Establish and maintain quality control for the environmental protection of all items set forth herein. B. Record on daily reports any problems in complying with laws, regulations, and ordinances. Note any corrective action taken. 1.3 REFERENCES A. The publications listed below form a
11、 part of this specification to the extent referenced. The publications are referred to in the text by basic designation only. B. U.S. National Archives and Records Administration (NARA): 33 CFR 328Definitions 1.4 SUBMITTALS A. In accordance with Section, 01 33 23, SHOP DRAWINGS, PRODUCT DATA, AND SA
12、MPLES, furnish the following: 1. Environmental Protection Plan: After the contract is awarded and prior to the commencement of the work, the Contractor shall meet with the Resident Engineer to discuss the proposed Environmental Protection Plan and to develop mutual understanding relative to details
13、of environmental protection. Not more than 20 days after the meeting, the Contractor shall prepare and submit to the Resident Engineer / and the Contracting Officer / for approval, a written and/or graphic Environmental Protection Plan including, but not limited to, the following: a. Name(s) of pers
14、on(s) within the Contractors organization who is (are) responsible for ensuring adherence to the Environmental Protection Plan. b. Name(s) and qualifications of person(s) responsible for manifesting hazardous waste to be removed from the site. c. Name(s) and qualifications of person(s) responsible f
15、or training the Contractors environmental protection personnel. d. Description of the Contractors environmental protection personnel training program. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-01-11 01 57 19- 3 e. A list of Federal, State, and
16、local laws, regulations, and permits concerning environmental protection, pollution control, noise control and abatement that are applicable to the Contractors proposed operations and the requirements imposed by those laws, regulations, and permits. f. Methods for protection of features to be preser
17、ved within authorized work areas including trees, shrubs, vines, grasses, ground cover, landscape features, air and water quality, fish and wildlife, soil, historical, and archeological and cultural resources. g. Procedures to provide the environmental protection that comply with the applicable laws
18、 and regulations. Describe the procedures to correct pollution of the environment due to accident, natural causes, or failure to follow the procedures as described in the Environmental Protection Plan. h. Permits, licenses, and the location of the solid waste disposal area. i. Drawings showing locat
19、ions of any proposed temporary excavations or embankments for haul roads, / stream crossings, / material storage areas, structures, sanitary facilities, and stockpiles of excess or spoil materials. Include as part of an Erosion Control Plan approved by the District Office of the U.S. Soil Conservati
20、on Service and the Department of Veterans Affairs. j. Environmental Monitoring Plans for the job site including land, water, air, and noise. k. Work Area Plan showing the proposed activity in each portion of the area and identifying the areas of limited use or nonuse. Plan should include measures fo
21、r marking the limits of use areas. This plan may be incorporated within the Erosion Control Plan. B. Approval of the Contractors Environmental Protection Plan will not relieve the Contractor of responsibility for adequate and continued control of pollutants and other environmental protection measure
22、s. 1.5 PROTECTION OF ENVIRONMENTAL RESOURCES A. Protect environmental resources within the project boundaries and those affected outside the limits of permanent work during the entire period of this contract. Confine activities to areas defined by the specifications and drawings. B. Protection of La
23、nd Resources: Prior to construction, identify all land resources to be preserved within the work area. Do not remove, cut, deface, injure, or destroy land resources including trees, shrubs, Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-01-11 01 57
24、19- 4 vines, grasses, top soil, and land forms without permission from the Resident Engineer. Do not fasten or attach ropes, cables, or guys to trees for anchorage unless specifically authorized, or where special emergency use is permitted. 1. Work Area Limits: Prior to any construction, mark the ar
25、eas that require work to be performed under this contract. Mark or fence isolated areas within the general work area that are to be saved and protected. Protect monuments, works of art, and markers before construction operations begin. Convey to all personnel the purpose of marking and protecting al
26、l necessary objects. 2. Protection of Landscape: Protect trees, shrubs, vines, grasses, land forms, and other landscape features shown on the drawings to be preserved by marking, fencing, or using any other approved techniques. a. Box and protect from damage existing trees and shrubs to remain on th
27、e construction site. b. Immediately repair all damage to existing trees and shrubs by trimming, cleaning, and painting with antiseptic tree paint. c. Do not store building materials or perform construction activities closer to existing trees or shrubs than the farthest extension of their limbs. 3. R
28、eduction of Exposure of Unprotected Erodible Soils: Plan and conduct earthwork to minimize the duration of exposure of unprotected soils. Clear areas in reasonably sized increments only as needed to use. Form earthwork to final grade as shown. Immediately protect side slopes and back slopes upon com
29、pletion of rough grading. 4. Temporary Protection of Disturbed Areas: Construct diversion ditches, benches, and berms to retard and divert runoff from the construction site to protected drainage areas approved under paragraph 208 of the Clean Water Act. SPEC WRITER NOTE: The design year storm is det
30、ermined by the downstream environment to be protected. Implement appropriate protection based on the estimate of damage to the downstream environment versus the design year storm that will cause damage. If permanent sediment basins are necessary for the particular project, include these permanent fa
31、cilities in the project design and the contract documents. If permanent basins are not required, delete reference thereto. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-01-11 01 57 19- 5 a. Sediment Basins: Trap sediment from construction areas in
32、temporary or permanent sediment basins that accommodate the runoff of a local /_/ (design year) storm. After each storm, pump the basins dry and remove the accumulated sediment. Control overflow/drainage with paved weirs or by vertical overflow pipes, draining from the surface. b. Reuse or conserve
33、the collected topsoil sediment as directed by the Resident Engineer. Topsoil use and requirements are specified in Section 31 20 00, EARTH MOVING. c. Institute effluent quality monitoring programs as required by Federal, State, and local environmental agencies. 5. Erosion and Sedimentation Control D
34、evices: The erosion and sediment controls selected and maintained by the Contractor shall be such that water quality standards are not violated as a result of the Contractors activities. Construct or install all temporary and permanent erosion and sedimentation control features / shown. / on the Env
35、ironmental Protection Plan. / Maintain temporary erosion and sediment control measures such as berms, dikes, drains, sedimentation basins, grassing, and mulching, until permanent drainage and erosion control facilities are completed and operative. 6. Manage borrow areas on / and off / Government pro
36、perty to minimize erosion and to prevent sediment from entering nearby water courses or lakes. 7. Manage and control spoil areas on / and off / Government property to limit spoil to areas / shown / on the Environmental Protection Plan / and prevent erosion of soil or sediment from entering nearby wa
37、ter courses or lakes. 8. Protect adjacent areas from despoilment by temporary excavations and embankments. 9. Handle and dispose of solid wastes in such a manner that will prevent contamination of the environment. Place solid wastes (excluding clearing debris) in containers that are emptied on a reg
38、ular schedule. Transport all solid waste off Government property and dispose of waste in compliance with Federal, State, and local requirements. 10. Store chemical waste away from the work areas in corrosion resistant containers and dispose of waste in accordance with Federal, State, and local regul
39、ations. 11. Handle discarded materials other than those included in the solid waste category as directed by the Resident Engineer. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-01-11 01 57 19- 6 C. Protection of Water Resources: Keep construction a
40、ctivities under surveillance, management, and control to avoid pollution of surface and ground waters and sewer systems. Implement management techniques to control water pollution by the listed construction activities that are included in this contract. 1. Washing and Curing Water: Do not allow wast
41、ewater directly derived from construction activities to enter water areas. Collect and place wastewater in retention ponds allowing the suspended material to settle, the pollutants to separate, or the water to evaporate. 2. Control movement of materials and equipment at stream crossings during const
42、ruction to prevent violation of water pollution control standards of the Federal, State, or local government. SPEC WRITER NOTE: Specify additional operations unique to this contract. 3. Monitor water areas affected by construction. D. Protection of Fish and Wildlife Resources: Keep construction acti
43、vities under surveillance, management, and control to minimize interference with, disturbance of, or damage to fish and wildlife. Prior to beginning construction operations, list species that require specific attention along with measures for their protection. E. Protection of Air Resources: Keep co
44、nstruction activities under surveillance, management, and control to minimize pollution of air resources. Burning is not permitted on the job site. Keep activities, equipment, processes, and work operated or performed, in strict accordance with the State of / insert Name of State and title of State
45、Air Pollution Statue, Rule, or Regulation / and Federal emission and performance laws and standards. Maintain ambient air quality standards set by the Environmental Protection Agency, for those construction operations and activities specified. 1. Particulates: Control dust particles, aerosols, and g
46、aseous by-products from all construction activities, processing, and preparation of materials (such as from asphaltic batch plants) at all times, including weekends, holidays, and hours when work is not in progress. 2. Particulates Control: Maintain all excavations, stockpiles, haul roads, permanent
47、 and temporary access roads, plant sites, spoil areas, borrow areas, and all other work areas within or outside the project boundaries free from particulates which would cause a hazard or a nuisance. Sprinklering, chemical treatment of an approved type, light bituminous treatment, baghouse, scrubber
48、s, electrostatic Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-01-11 01 57 19- 7 precipitators, or other methods are permitted to control particulates in the work area. 3. Hydrocarbons and Carbon Monoxide: Control monoxide emissions from equipment
49、to Federal and State allowable limits. 4. Odors: Control odors of construction activities and prevent obnoxious odors from occurring. F. Reduction of Noise: Minimize noise using every action possible. Perform noise-producing work in less sensitive hours of the day or week as directed by the Resident Engineer. Maintain noise-produced work at or below the decibel levels and within the time p
