1、 IEC 61298-1Edition 2.0 2008-10INTERNATIONAL STANDARD NORME INTERNATIONALEProcess measurement and control devices General methods and procedures for evaluating performance Part 1: General considerations Dispositifs de mesure et de commande de processus Mthodes et procdures gnrales dvaluation des per
2、formances Partie 1: Gnralits IEC61298-1:2008 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2008 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including pho
3、tocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your l
4、ocal IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microf
5、ilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pa
6、ys de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electroni
7、c and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IE
8、C on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Publishe
9、d details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in add
10、itional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.
11、ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des p
12、ublications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la C
13、EI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications
14、de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglai
15、s et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez
16、des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 61298-1Edition 2.0 2008-10INTERNATIONAL STANDARD NORME INTERNATIONALEProcess measurement and control devices General methods and procedures for evaluating performance
17、Part 1: General considerations Dispositifs de mesure et de commande de processus Mthodes et procdures gnrales dvaluation des performances Partie 1: Gnralits INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE QICS 25.040.40 PRICE CODECODE PRIXISBN 2-8318-1003-0 Regis
18、tered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 61298-1 IEC:2008 CONTENTS FOREWORD.4 INTRODUCTION.6 1 Scope.7 2 Normative references .7 3 Terms and definitions .7 4 Test categories.9 5 General criteria 9 5.1 Realistic o
19、perating conditions9 5.2 Economic aspects .10 5.3 Replication of the tests and comparability of the results 10 5.3.1 Standardization of test methods 10 5.3.2 Influence factors10 5.3.3 Documentation of the test methods10 5.4 Processing the results .10 5.5 Independence of the results of a test from th
20、e effects of other tests 10 6 General conditions for tests and samples .11 6.1 Environmental test conditions11 6.1.1 Recommended limits of ambient conditions for test measurements11 6.2 Supply conditions 11 6.2.1 Reference values.11 6.2.2 Tolerances 11 6.3 Load conditions .12 6.4 Mounting position 1
21、2 6.5 Externally induced vibrations.12 6.6 External mechanical constraints 12 6.7 Selection .13 6.7.1 Criteria 13 6.7.2 Selection procedures.13 6.8 Delivery of the devices 13 6.9 Identification and inspection 13 7 General testing procedures and precautions.13 7.1 Test laboratory 13 7.2 Preparation f
22、or the tests14 7.3 Choice of reference measuring equipment.14 7.3.1 Criteria 14 7.3.2 Uncertainty of the measuring system .14 7.3.3 Traceability14 7.4 Input variable quality .14 7.5 Tapping.15 7.6 Checking of calibration made as delivered.15 7.7 Sequence of tests .15 7.8 Interruption and duration of
23、 each series of measurements.15 7.9 Anomalies and failures during tests .15 7.9.1 General .15 7.9.2 Procedures15 7.10 Re-start of a test .15 61298-1 IEC:2008 3 7.11 Setting of adjustments.16 7.12 Preconditioning .16 7.12.1 Criteria 16 7.12.2 Procedure16 7.13 Calibration adjustments of lower range va
24、lue and span .16 7.14 Constancy of the operating conditions and settings .16 7.15 Input/output variable relationships.16 7.15.1 Criteria 16 7.15.2 Procedure16 7.16 Error assessment 17 7.17 Symbols and units of measurement .17 7.18 Test report and documentation 17 4 61298-1 IEC:2008 INTERNATIONAL ELE
25、CTROTECHNICAL COMMISSION _ PROCESS MEASUREMENT AND CONTROL DEVICES GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE Part 1: General considerations FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrot
26、echnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specificati
27、ons, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International,
28、 governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decis
29、ions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for intern
30、ational use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In ord
31、er to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be cle
32、arly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability sha
33、ll attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including leg
34、al fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this pub
35、lication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61298-1 has been prepared by subcommittee 65B: Devices
36、 and process analysis, of IEC technical committee 65: Industrial-process measurement, control and automation. This second edition cancels and replaces the first edition published in 1995 and constitutes a technical revision. This edition is a general revision with respect to the previous edition and
37、 does not include any significant changes (see Introduction). 61298-1 IEC:2008 5 The text of this standard is based on the following documents: FDIS Report on voting 65B/685/FDIS 65B/693/RVDFull information on the voting for the approval of this standard can be found in the report on voting indicate
38、d in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 61298 series, under the general title Process measurement and control devices General methods and procedures for evaluating performance, can be found on the IEC w
39、ebsite. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, r
40、eplaced by a revised edition, or amended. 6 61298-1 IEC:2008 INTRODUCTION This standard is not intended as a substitute for existing standards, but is rather intended as a reference document for any future standards developed within the IEC or other standards organizations, concerning the evaluation
41、 of process instrumentation. Any revision of existing standards should take this standard into account. This common standardized basis should be utilized for the preparation of future relevant standards, as follows: any test method or procedure, already treated in this standard, should be specified
42、and described in the new standard by referring to the corresponding clause of this standard. Consequently new editions of this standard are revised without any change in numbering and scope of each clause; any particular method or procedure, not covered by this standard, should be developed and spec
43、ified in the new standard in accordance with the criteria, as far as they are applicable, stated in this standard; any conceptual or significant deviation from the content of this standard, should clearly be identified and justified if introduced in a new standard. 61298-1 IEC:2008 7 PROCESS MEASURE
44、MENT AND CONTROL DEVICES GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE Part 1: General considerations 1 Scope This part of IEC 61298 specifies general methods and procedures for conducting tests, and reporting on the functional and performance characteristics of process measurement and c
45、ontrol devices. The methods and procedures specified in this standard are applicable to any type of process measurement and control device. The tests are applicable to any such devices characterized by their own specific input and output variables, and by the specific relationship (transfer function
46、) between the inputs and outputs, and include analogue and digital devices. For devices that require special tests, this standard should be used, together with any product specific standard specifying special tests. This standard covers general principles which apply to the series. 2 Normative refer
47、ences The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60050-300, International Electrotechnic
48、al Vocabulary (IEV) Electrical and electronic measurements and measuring instruments (composed of Part 311, 312, 313 and 314) IEC 60050-351, International Electrotechnical Vocabulary (IEV) Part 351: Control technology IEC 60410:1973, Sampling plans and procedures for inspection by attributes IEC 612
49、98-4, Process measurement and control devices General methods and procedures for evaluating performance Part 4: Evaluation report content IEC 61298-2, Process measurement and control devices General methods and procedures for evaluating performance Part 2: Tests under reference conditions ISO 31 (all parts), Quantities and units 3 Terms and definitions For the purpose of this document,
