1、 IEC 62343-1-3 Edition 2.0 2012-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Dynamic modules Part 1-3: Performance standards Dynamic gain tilt equalizer (non-connectorized) Modules dynamiques Partie 1-3: Normes de performance Egaliseur dynamique de basculement de gain (non-connectoris) IEC62343-1-
2、3:2012 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2012 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permi
3、ssion in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for
4、 further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou d
5、u Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel
6、.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and r
7、elated technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The
8、advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Ju
9、st Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent t
10、erms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos
11、de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de
12、la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critr
13、es (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues
14、. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues a
15、dditionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62343-1-3 Edition 2.0 2012-12 INTERNATIONAL S
16、TANDARD NORME INTERNATIONALE Dynamic modules Part 1-3: Performance standards Dynamic gain tilt equalizer (non-connectorized) Modules dynamiques Partie 1-3: Normes de performance Egaliseur dynamique de basculement de gain (non-connectoris) INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROT
17、ECHNIQUE INTERNATIONALE L ICS 33.180.01; 33.180.99 PRICE CODE CODE PRIX ISBN 978-2-83220-516-7 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized
18、distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 62343-1-3 IEC:2012 CONTENTS FOREWORD . 3 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 6 4 Operating and storage conditions . 7 4.1 Operating conditions . 7 4.2 Storage
19、environmental conditions 7 5 Test 8 6 Test report 8 7 Performance requirements . 8 7.1 Dimensions . 8 7.2 Sample size 8 7.3 Test details and requirements . 8 Bibliography 11 Table 1 Operating conditions . 7 Table 2 Storage environmental conditions 7 Table 3 Test details and requirements . 9 62343-1-
20、3 IEC:2012 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ DYNAMIC MODULES Part 1-3: Performance standards Dynamic gain tilt equalizer (non-connectorized) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotech
21、nical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications
22、, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, go
23、vernmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decision
24、s or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for internati
25、onal use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order
26、to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearl
27、y indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bod
28、ies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, propert
29、y damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in thi
30、s publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or
31、 all such patent rights. International Standard IEC 62343-1-3 has been prepared by subcommittee 86C: Fibre optic systems and active devices, of IEC technical committee 86: Fibre optics. This second edition cancels and replaces the first edition published in 2006. It constitutes a technical revision.
32、 This edition includes the following significant technical changes with respect to the previous edition: a) a change in the title removing the environmental category; b) the addition of Clause 4, Operating and storage conditions; c) the inclusion of spectral bands in Clause 5, Test; d) a definition
33、of the wavelength range for test requirements in Clause 5, Test; e) the removal of the environment tests from the test details and requirements. 4 62343-1-3 IEC:2012 The text of this standard is based on the following documents: CDV Report on voting 86C/1077/CDV 86C/1092/RVC Full information on the
34、voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 62343 series, published under the general title Dynamic modules, can be foun
35、d on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdra
36、wn, replaced by a revised edition, or amended. 62343-1-3 IEC:2012 5 DYNAMIC MODULES Part 1-3: Performance standards Dynamic gain tilt equalizer (non-connectorized) 1 Scope This part of IEC 62343 contains the guideline minimum initialization test and measurement requirements and severities, for a dyn
37、amic gain tilt equalizer (DGTE). A DGTE is used in an optical amplifier, which operates in C-band and/or L-band, to control the output power of the amplifier to be nominally flat. The operating wavelength range of a DGTE is wider than or equal to 35 nm. 2 Normative references The following documents
38、, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61300-2-14, Fibre optic in
39、terconnecting devices and passive components Basic test and measurement procedures Part 2-14: Tests Optical power handling and damage threshold characterization IEC 61300-3-2, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-2: Examinations and
40、measurements Polarization dependent loss in a single-mode fibre optic device IEC 61300-3-6, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-6: Examinations and measurements Return loss IEC 61300-3-7, Fibre optic interconnecting devices and pass
41、ive components Basic test and measurement procedures Part 3-7: Examinations and measurements Wavelength dependence of attenuation and return loss of single mode components IEC 61300-3-32, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-32: Exam
42、inations and measurements Polarization mode dispersion measurement for passive optical components IEC 61300-3-38, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-38: Examinations and measurements Group delay, chromatic dispersion and phase ripp
43、le IEC 61753-021-2, Fibre optic interconnecting devices and passive components performance standard Part 021-2: Grade C/3 single-mode fibre optic connectors for category C Controlled environment 6 62343-1-3 IEC:2012 IEC 61753-022-2, Fibre optic interconnecting devices and passive components performa
44、nce standard Part 022-2: Fibre optic connectors terminated on multimode fibre for category C Controlled environment IEC 62343-5-1, Dynamic modules Test methods Part 5-1: Dynamic gain tilt equalizer Response time measurement ITU-T Recommendation G.692, Optical interfaces for multichannel systems with
45、 optical amplifiers 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 dynamic spectral equalizer DSE two port in-line dynamic module that converts an input signal with time-varying spectral shape into an output signal in which spectral shape is
46、 nominally flat, or is set for a required spectral shape for pre-emphasis 3.2 dynamic gain tilt equalizer DGTE dynamic spectral equalizer used in an optical amplifier that converts input signals with time-varying gain tilt into output signals in which gain tilt is nominally flat, or is set for a req
47、uired gain tilt 3.3 operating wavelength range specified range of wavelengths about a nominal operating wavelength within which a dynamic module is designed to operate with the specified performances 3.4 dynamic gain tilt range difference between the maximum and minimum deviation of attenuation over
48、 operating wavelength range, to which the dynamic gain tilt equalizer can be set 3.5 positive slope type type of DGTE for which dynamic gain tilt range can be set for positive gain tilt 3.6 negative slope type type of DGTE for which dynamic gain tilt range can be set for negative gain tilt 3.7 both
49、slope type type of DGTE to which dynamic gain tilt range can be set for both positive and negative gain tilt 3.8 slope linearity maximum deviation of attenuation between the spectral shape by dynamic gain tilt equalizer and linear slope over the operating wavelength range 62343-1-3 IEC:2012 7 3.9 gain tilt settle time longest elapsed time it takes a dynamic gain tilt equalizer to chan
