1、 IEC 62776 Edition 1.0 2014-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Double-capped LED lamps designed to retrofit linear fluorescent lamps Safety specifications Lampes LED deux culots conues pour remplacer des lampes fluorescence linaires Spcifications de scurit IEC 62776:2014-12(en-fr) THIS P
2、UBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writ
3、ing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further info
4、rmation. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit nationa
5、l de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3
6、, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies.
7、About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting t
8、he entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety
9、of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available onli
10、ne and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 14 additional languages. Also known as the International El
11、ectrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of
12、IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premi
13、re organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la p
14、lus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible po
15、ur PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications rem
16、places ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en l
17、igne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 14 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de
18、55 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous
19、 dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62776 Edition 1.0 2014-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Double-capped LED lamps designed to retrofit linear fluorescent lamps Safety specifications Lampes LED deux cu
20、lots conues pour remplacer des lampes fluorescence linaires Spcifications de scurit INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE U ICS 29.140.99 PRICE CODE CODE PRIX ISBN 978-2-8322-1939-3 Registered trademark of the International Electrotechnical Commission M
21、arque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 62776:2014 IEC 2014 CONTENTS FOREWORD . 4 INTRODUC
22、TION . 6 1 Scope 7 2 Normative references 7 3 Terms and definitions 8 4 General requirements and general test requirements . 9 5 Marking . 10 5.1 Marking on the lamp . 10 5.2 Marking on the lamp, on the immediate lamp wrapping (or container) or in the instructions . 12 5.3 Instruction manual 12 Gene
23、ral . 12 5.3.1Declaration of the product 12 5.3.2Graphical instruction 13 5.3.3Mounting . 13 5.3.4 5.4 Compliance . 13 6 Interchangeability 14 6.1 Interchangeability of the cap . 14 6.2 Mass . 14 6.3 Dimensions . 14 Requirements 14 6.3.1Dimensions at 25 C (non-operating) . 14 6.3.2Variation of dimen
24、sion A due to self-heating at 25 C 15 6.3.3Dimension B at minimum ambient temperature 15 6.3.4Dimension A at maximum ambient temperature . 15 6.3.5Compliance . 15 6.3.6 6.4 Temperature . 15 Temperature requirement 15 6.4.1Power requirement 16 6.4.2Compliance . 16 6.4.3 6.5 Safety of the lamp in case
25、 a wrong starter-lamp combination is used 16 7 Pin-safety during insertion . 16 8 Protection against accidental contact with live parts 17 8.1 General . 17 8.2 Test to establish whether a conductive part may cause an electric shock during operation 17 8.3 Insulation resistance . 19 8.4 Electric stre
26、ngth 19 9 Mechanical requirements for caps . 19 9.1 Construction and assembly . 19 9.2 Torque test on unused lamps 19 9.3 Torque test after heat treatment 20 9.4 Repetition of 8.2 . 20 10 Cap temperature rise . 20 11 Resistance to heat . 21 IEC 62776:2014 IEC 2014 3 12 Resistance to flame and igniti
27、on 22 13 Fault conditions . 22 13.1 General . 22 13.2 Testing under extreme electrical conditions 22 13.3 Short-circuit across capacitors 23 13.4 Fault conditions across electronic components . 23 13.5 Compliance . 23 13.6 Further requirements 24 13.7 Safety of the lamp with different types of contr
28、olgear 24 13.8 Compliance for test with different types of controlgear 25 13.9 Safety of the lamp in case the luminaire controlgear short circuits 25 14 Creepage distances and clearances 25 15 Lamp with protection against dust and moisture 25 15.1 Aim of the test 25 15.2 Thermal endurance . 26 15.3
29、IP testing 26 16 Photobiological hazard 26 16.1 UV radiation 26 16.2 Blue light hazard . 26 16.3 Infrared radiation 26 (informative) Conformity testing during manufacture 27 Annex A A.1 Background and recommended procedure 27 A.2 Testing . 27 Bibliography 28 Figure 1 Lamp suitable for high frequency
30、 operation 10 Figure 2 Lamp suitable for 50 Hz or 60 Hz operation 11 Figure 3 Lamp not suitable for emergency operation 11 Figure 4 LED replacement starter 11 Figure 5 Lamp to be used in dry conditions or in a luminaire that provides protection . 12 Figure 6 Dimming not allowed 12 Figure 7 Schematic
31、 steps of removing a fluorescent lamp and inserting a double- capped LED lamp designed to retrofit linear fluorescent lamp . 13 Figure 8 Test configuration for touch current measurement 17 Figure 9 Standard test finger (according to IEC 60529) 18 Figure 10 Ball-pressure test apparatus. 21 Table 1 In
32、terchangeability gauges and lamp cap dimensions . 14 Table 2 Torque values for unused lamps 20 Table 3 Torque values after heating treatment . 20 Table 4 Minimum LED lamp impedances 24 Table A.1 Minimum values for electrical tests. 27 4 IEC 62776:2014 IEC 2014 INTERNATIONAL ELECTROTECHNICAL COMMISSI
33、ON _ DOUBLE-CAPPED LED LAMPS DESIGNED TO RETROFIT LINEAR FLUORESCENT LAMPS SAFETY SPECIFICATIONS FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object o
34、f IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (
35、PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising
36、with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as
37、 nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in
38、 that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Commi
39、ttees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provi
40、de any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the late
41、st edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whet
42、her direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is in
43、dispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 627
44、76 has been prepared by subcommittee 34A: Lamps, of IEC of IEC technical committee 34: Lamps and related equipment. The text of this standard is based on the following documents: FDIS Report on voting 34A/1795/FDIS 34A/1816/RVD Full information on the voting for the approval of this standard can be
45、found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. In this standard, the following print types are used: IEC 62776:2014 IEC 2014 5 requirements proper: in roman type. test specifications: in italic type. No
46、tes: in small roman type. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, wit
47、hdrawn, replaced by a revised edition, or amended. 6 IEC 62776:2014 IEC 2014 INTRODUCTION Double-capped fluorescent lamps are installed in big volume in office lighting, street lighting, industrial lighting and much more. Double-capped LED lamps are intended as a possible replacement for G5- or G13-
48、capped fluorescent lamps. This standard safeguards that the change from fluorescent lamp to LED lamp and the backward change from LED lamp to fluorescent lamp is carried out with safe LED lamps and under specified exchange conditions. The establishing of a safety standard for double-capped LED lamps
49、 does not exclude future relocation as a part of IEC 60968, self-ballasted lamps (if re-edited as an umbrella standard), and further inclusion of requirements for conversion type double-capped LED lamps. This proposal covers double-capped LED lamps with cap G5 and G13 only, where the fluorescent tube is replaced by a tubular LED lamp, without modifications to the luminaire. Only in case
