1、 IEC 62826 Edition 1.0 2014-08 INTERNATIONAL STANDARD NORME INTERNATIONALE Surface cleaning appliances Floor treatment machines with or without traction drive, for commercial use Methods of measuring the performance Appareils de nettoyage de surface Machines de traitements des sols avec ou sans comm
2、ande de dispositif de dplacement, usage commercial Mthodes de mesure des performances IEC 62826:2014-08(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in
3、 any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional righ
4、ts to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun pro
5、cd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes
6、ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organ
7、ization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendm
8、ent might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iP
9、ad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublis
10、hed Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and de
11、finitions in English and French, with equivalent terms in 14 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the Terms and Def
12、initions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the
13、Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IE
14、C Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur
15、 les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critre
16、s (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Dispo
17、nible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 14 langues additionnelles. Eg
18、alement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 55 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres an
19、trieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62826 Edition 1.0 2014-08 INTERNATIONAL STANDARD NORME INTERNAT
20、IONALE Surface cleaning appliances Floor treatment machines with or without traction drive, for commercial use Methods of measuring the performance Appareils de nettoyage de surface Machines de traitements des sols avec ou sans commande de dispositif de dplacement, usage commercial Mthodes de mesure
21、 des performances INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE T ICS 97.080 PRICE CODE CODE PRIX ISBN 978-2-8322-1824-2 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning!
22、 Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 62826:2014 IEC 2014 CONTENTS FOREWORD. 5 1 Scope 7 2 Normative references 7 3 Terms, definitions and abbreviations 8 3.
23、1 Terms and definitions 8 3.2 Abbreviations 8 4 General conditions for testing 8 4.1 Atmospheric conditions . 8 4.2 Machine loading 8 4.3 Machine set-up . 9 5 Working path width 9 5.1 Working scrubbing path width 9 5.2 Total pad/brush width 9 5.3 Maximum squeegee width . 9 5.4 Minimum working sweepi
24、ng path width 9 5.5 Maximum working sweeping path width . 9 5.6 Measurement method 9 5.7 Reporting 9 6 Minimum aisle turn-around width 10 6.1 General . 10 6.2 Measurement method 10 6.3 Reporting 10 7 Machine transport width . 10 7.1 General . 10 7.2 Measurement method 10 7.3 Reporting 10 8 Weight .
25、10 8.1 Gross vehicle weight (GVW) taken from IEC 60335-2-72 10 8.2 Empty weight 11 8.3 Transportation weight 11 8.4 Reporting 11 9 Maximum scrub deck down force . 11 9.1 General . 11 9.2 Measurement method 11 9.3 Reporting 11 10 Maximum scrub deck down pressure 12 10.1 General . 12 10.2 Determinatio
26、n method . 12 10.3 Reporting 12 11 Rotating speed of pads, brushes and brooms . 12 11.1 General . 12 11.2 Measurement method unloaded operation . 12 11.3 Measurement method loaded operation 12 11.4 Reporting 13 IEC 62826:2014 IEC 2014 3 12 Maximum floor load and wheel contact pressure . 13 12.1 Gene
27、ral . 13 12.2 Measurement method 13 12.3 Reporting 13 13 Speed . 13 13.1 Maximum transport mode speed (power driven machines) 13 13.2 Maximum working mode speed 13 13.3 Measurement method 13 13.4 Reporting 13 14 Sound . 13 14.1 Sound power level . 13 14.2 Sound pressure Level . 14 14.3 Measurement m
28、ethod 14 14.4 Reporting 14 15 Vibration 14 15.1 Hand-arm system vibration total value . 14 15.2 Whole-body vibration total value 14 15.3 Measurement method 14 15.4 Reporting 14 16 Solution flow rate . 14 16.1 General . 14 16.2 Measurement method 14 16.3 Reporting 14 17 Rated hopper volume capacity .
29、 15 17.1 General . 15 17.2 Measurement method 15 17.3 Reporting 15 18 Tank capacity solution tank and recovery tank . 15 18.1 General . 15 18.2 Measurement method solution tank . 15 18.3 Measurement method recovery tank . 15 18.4 Reporting 15 19 Recovery tank drain time . 16 19.1 General . 16 19.2 M
30、easurement method 16 19.3 Reporting 16 20 Water coverage test . 16 20.1 General . 16 20.2 Machine preparation 16 20.3 Measurement method 16 20.4 Reporting 17 21 Battery amp-hour capacity . 17 21.1 General . 17 21.2 Reporting 17 22 Calculated battery-powered (max.) machine run time . 17 23 Rated powe
31、r 17 23.1 Rated power for combustion engines (output power) 17 4 IEC 62826:2014 IEC 2014 23.2 Rated power input . 17 23.3 Rated power for electric motors . 18 23.4 Reporting 18 24 Air flow of sweeping/scrubbing machines . 18 24.1 General . 18 24.2 Measurement methods 18 24.3 Reporting 18 25 Maximum
32、vacuum 18 25.1 General . 18 25.2 Measurement method 19 25.3 Reporting 19 26 Filter area 19 26.1 General . 19 26.2 Measurement method 19 26.3 Reporting 19 27 Productivity . 19 (normative) Evaluation of wheel contact pressure on hard floors and floor Annex A loading of floor cleaning machines . 20 A.1
33、 Mean pressure of wheels . 20 A.2 Weight of the operable machine 20 A.3 Evaluation of mean wheel contact pressure . 20 A.4 Evaluation of the working load . 21 A.5 Data sheet 22 (informative) Traction batteries for cleaning machines . 23 Annex B(informative) Realistic productivity at each scrub setti
34、ng . 24 Annex C Bibliography . 25 Figure A.1 Method for evaluating a wheel footprint . 21 Figure A.2 Method for evaluating the footprint of double-castors . 21 IEC 62826:2014 IEC 2014 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SURFACE CLEANING APPLIANCES Floor treatment machines with or without t
35、raction drive, for commercial use Methods of measuring the performance FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote intern
36、ational co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter
37、 referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also particip
38、ate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an in
39、ternational consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all rea
40、sonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply I
41、EC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conf
42、ormity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publica
43、tion. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or
44、 for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correc
45、t application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62826 has been prepared by su
46、bcommittee SC 59F: Surface cleaning appliances, of IEC technical committee TC 59: Performance of household and similar electrical appliances. The text of this standard is based on the following documents: CDV Report on voting 59F/238A/CDV 59F/254/RVC Full information on the voting for the approval o
47、f this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 6 IEC 62826:2014 IEC 2014 The committee has decided that the contents of this publication will remain unchanged until the stability
48、date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IEC 62826:2014 IEC 2014 7 SURFACE CLEANING APPLIANCES Floor treatment machines wi
49、th or without traction drive, for commercial use Methods of measuring the performance 1 Scope This International Standard lists the characteristic performance parameters for walk-behind and ride-on floor scrubbers and sweepers and other floor cleaning machines according to IEC 60335-2-72. This standard does not apply to IEC 60312 series. The intent is to serve the manufacturers in describing parameters
