C0076900_923 Method of Test for Boiled Linseed Oil《熟炼亚麻仁油检验法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

PPI TN-11-1999 Suggested Temperature Limits for the Operation and Installation of Thermoplastic Piping in Non-Pressure Applications《热塑性管道在非压力应用中的操作和安装建议温度范围》.pdf

PPI TN-13-2007 General Guidelines for Butt Saddle and Socket Fusion of Unlike Polyethylene Pipes and Fittings《非聚乙烯管和配件的截头 底座和插口熔合的一般指南》.pdf

PPI TN-14-2016 Plastic Pipe in Solar Heating Systems.pdf

PPI TN-15-2009 Resistance of Solid Wall Polyethylene Pipe to a Sanitary Sewage Environment《实心壁聚乙烯管对生活污水环境的抵抗性》.pdf

PPI TN-16-2008 Rate Process Method for Projecting Performance of Polyethylene Piping Components《测定聚乙烯管道部件性能的速率过程法》.pdf

PPI TN-17-2013 Crosslinked Polyethylene (PEX) Pipe & Tubing.pdf

PPI TN-19-2010 Pipe Stiffness (PS) Ring Stiffness Constant (RSC) and Flexibility Factor (FF) for Buried Gravity Flow Pipes.pdf

PPI TN-20-2007 Special Precautions for Fusing Saddle Fittings to Live PE Fuel Gas Mains Pressurized on the Basis of a 0 40 Design Factor《为实现聚乙烯燃气总管道在0 40设计因数基础上的加压而熔合底座配件的特别预防措施》.pdf

PPI TN-21-2013 PPI PENT Test Investigation.pdf