1、 IEC 60603-7-5 Edition 2.0 2010-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Connectors for electronic equipment Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 250 MHz Connecteurs pour quipements lectroniques Partie 7-5:
2、Spcification particulire pour les fiches et les embases blindes 8 voies pour la transmission de donnes des frquences jusqu 250 MHz IEC 60603-7-5:2010 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publi
3、cation may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an
4、enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous que
5、lque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires su
6、r cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the lead
7、ing global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrige
8、nda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC
9、Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical te
10、rms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publicati
11、on or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes interna
12、tionales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publ
13、i. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou re
14、mplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne
15、 au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custser
16、v/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60603-7-5 Edition 2.0 2010-04 INTERNATIONAL STANDARD NORME INT
17、ERNATIONALE Connectors for electronic equipment Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 250 MHz Connecteurs pour quipements lectroniques Partie 7-5: Spcification particulire pour les fiches et les embases blindes 8 v
18、oies pour la transmission de donnes des frquences jusqu 250 MHz INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE M ICS 31.220.10 PRICE CODE CODE PRIX ISBN 978-2-88910-232-7 Registered trademark of the International Electrotechnical Commission Marque dpose de la Co
19、mmission Electrotechnique Internationale 2 60603-7-5 IEC:2010 CONTENTS FOREWORD.3 INTRODUCTION.5 1 General 6 1.1 Scope6 1.2 Normative references 6 2 Terms and definitions .7 3 Common features and isometric view .7 4 Cable terminations and internal connections Fixed and free connectors 7 5 Gauges 7 6
20、 Characteristics .7 6.1 General .7 6.2 Pin and pair grouping assignment. 7 6.3 Classification into climatic category.7 6.4 Electrical characteristics7 6.5 Transmission characteristics .7 6.5.1 General .7 6.5.2 Insertion loss.8 6.5.3 Return loss8 6.5.4 Propagation delay .8 6.5.5 Delay skew8 6.5.6 NEX
21、T 8 6.5.7 Power sum NEXT (for information only) .8 6.5.8 FEXT.9 6.5.9 Power sum FEXT (for information only) .9 6.5.10 Transverse conversion loss .9 6.5.11 Transverse conversion transfer loss 9 6.6 Mechanical9 7 Tests and test schedule10 7.1 General .10 7.2 Arrangement for contact resistance test: .1
22、0 7.3 Arrangement for vibration test .10 7.4 Test procedures and measuring methods 10 7.5 Preconditioning .10 7.6 Wiring and mounting of specimens 10 7.6.1 Wiring10 7.6.2 Mounting .10 7.7 Test schedules 10 7.7.1 Basic (minimum) test schedule 10 7.7.2 Full test schedule 10 Bibliography13 Table 1 Test
23、 Group EP 11 60603-7-5 IEC:2010 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ CONNECTORS FOR ELECTRONIC EQUIPMENT Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 250 MHz FOREWORD 1) The International Electrotechnical Commiss
24、ion (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
25、addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee int
26、erested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance
27、 with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interest
28、ed IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible
29、 for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence betw
30、een any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of co
31、nformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and me
32、mbers of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication
33、 or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication
34、 may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60603-7-5 has been prepared by subcommittee 48B: Connectors, of IEC technical committee 48: Electromechanical components and mechanical structures for ele
35、ctronic equipment. This second edition of IEC 60603-7-5 cancels and replaces the first edition issued in 2007, and constitutes a technical revision. The main technical changes with regard to the previous edition are as follows: Removal of test methods that are now referenced to IEC 60512-26-100. Add
36、ition of TCL and TCTL requirements. Removal of the electrical, mechanical, dimensional, environmental conditioning tests by reference to IEC 60603-7. 4 60603-7-5 IEC:2010 The text of this standard is based on the following documents: FDIS Report on voting 48B/2138/FDIS 48B/2179/RVD Full information
37、on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of IEC 60603 series, under the general title Connectors for electronic equipment
38、, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfi
39、rmed, withdrawn, replaced by a revised edition, or amended. 60603-7-5 IEC:2010 5 INTRODUCTION IEC 60603-7 is the base specification of the whole series. Subsequent specifications do not duplicate information given in the base document, but list only additional requirements. For complete specificatio
40、n regarding a component of a higher number document all lower numbered documents shall be considered as well. The following diagram shows the interrelation of the documents: Indicates reference for transmission performance (backward compatibility) Indicates reference for dimensions, mechanical and e
41、lectrical characteristics, tests and test schedules. Unshielded Shielded 3 MHz 100 MHz 250 MHz 600 MHz IEC 60603-7 IEC 60603-7-1 IEC 60603-7-3 IEC 60603-7-4 IEC 60603-7-5 IEC 60603-7-7 500 MHz IEC 60603-7-41 IEC 60603-7-51 1 000 MHz IEC 60603-7-71 IEC 60603-7-2 6 60603-7-5 IEC:2010 CONNECTORS FOR EL
42、ECTRONIC EQUIPMENT Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 250 MHz 1 General 1.1 Scope This part of IEC 60603 covers 8-way, shielded, free and fixed connectors and references dimensional, mechanical, electrical and e
43、nvironmental characteristics and tests in IEC 60603-7 and IEC 60603-7-1, and specifies electrical transmission requirements for frequencies up to 250 MHz. These connectors are typically used as category 6 connectors in class E cabling systems specified in ISO/IEC 11801. These connectors are intermat
44、eable and interoperable with other IEC 60603-7 series connectors as defined in Clause 2 of IEC 60603-7. These connectors are backward compatible with other IEC 60603-7 series connectors. NOTE Transmission performance categories: in this IEC standard, the term “category”, when used in reference to tr
45、ansmission performance, refers to those categories defined by ISO/IEC 11801. 1.2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the ref
46、erenced document (including any amendments) applies. IEC 60512-1-100, Connectors for electronic equipment Part 1-100: General Applicable publications IEC 60512-2-1, Connectors for electronic equipment Tests and measurements Part 2-1: Electrical continuity and contact resistance tests Test 2a: Contac
47、t resistance Millivolt level method IEC 60512-27-100, Connectors for electronic equipment Tests and measurements Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors Tests 27a to 27g 1IEC 60603-7:2008, Connectors for electronic equipment Part 7: Detail specification for
48、 8- way, unshielded, free and fixed connectors IEC 60603-7-1:2009, Connectors for electronic equipment Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors IEC 61156 (all parts): Multi-core and symmetrical pair/quad cables for digital communications _ 1To be published. 60603
49、-7-5 IEC:2010 7 2 Terms and definitions For the purposes of this document, the terms and definitions given in Clause 2 of IEC 60603-7 apply as well as the following. 2.1 backward compatibility the backward compatibility requirement ensures that a free or fixed connector which is in compliance with this standard, mated with a fixed or free connector respectively in
