1、 IEC 60695-2-12 Edition 2.1 2014-02 CONSOLIDATED VERSION VERSION CONSOLIDE Fire hazard testing Part 2-12: Glowing/hot-wire based test methods Glow-wire flammability index (GWFI) test method for materials Essais relatifs aux risques du feu Partie 2-12: Essais au fil incandescent/chauffant Mthode dess
2、ai dindice dinflammabilit au fil incandescent (GWFI) pour matriaux IEC60695-2-12:2010-10+AMD1:2014-02CSV(EN-FR)BASIC SAFETY PUBLICATION PUBLICATION FONDAMENTALE DE SCURIT colourinsideTHIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC, Geneva, Switzerland All rights reserved. Unless otherwise
3、 specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any question
4、s about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut t
5、re reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir d
6、es droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The Int
7、ernational Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Plea
8、se make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Repor
9、ts and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and
10、 withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of
11、electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 14 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical te
12、rminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feed
13、back on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, l
14、lectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Applicat
15、ion autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche ava
16、nce permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publicati
17、ons IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en fra
18、nais, ainsi que les termes quivalents dans 14 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 55 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfin
19、itions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec
20、.ch. IEC 60695-2-12 Edition 2.1 2014-02 CONSOLIDATED VERSION VERSION CONSOLIDE Fire hazard testing Part 2-12: Glowing/hot-wire based test methods Glow-wire flammability index (GWFI) test method for materials Essais relatifs aux risques du feu Partie 2-12: Essais au fil incandescent/chauffant Mthode
21、dessai dindice dinflammabilit au fil incandescent (GWFI) pour matriaux INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 13.220.40, 29.020 ISBN 978-2-8322-1398-8 BASIC SAFETY PUBLICATION PUBLICATION FONDAMENTALE DE SCURIT Registered trademark of the Internation
22、al Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colourinsideIEC 60695-2-
23、12 Edition 2.1 2014-02 REDLINE VERSION VERSION REDLINE Fire hazard testing Part 2-12: Glowing/hot-wire based test methods Glow-wire flammability index (GWFI) test method for materials Essais relatifs aux risques du feu Partie 2-12: Essais au fil incandescent/chauffant Mthode dessai dindice dinflamma
24、bilit au fil incandescent (GWFI) pour matriaux IEC60695-2-12:2010-10+AMD1:2014-02CSV(EN-FR)BASIC SAFETY PUBLICATION PUBLICATION FONDAMENTALE DE SCURIT colourinside 2 IEC 60695-2-12:2010 +AMD1:2014 CSV IEC 2014 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 6 2 Normative references 6 3 Terms and de
25、finitions . 7 4 Test specimens 8 4.1 Test specimen preparation . 8 4.2 Test specimen dimensions . 8 4.3 Testing ranges in formulations . 8 4.3.1 General . 8 4.3.2 Density, melt flows and filler/reinforcement 9 4.3.3 Colour . 9 5 Apparatus . 9 6 Temperature measuring system verification 9 7 Condition
26、ing and test conditions 9 7.1 Conditioning of test specimens 9 7.2 Conditioning of the wrapping tissue and the wooden board . 9 7.3 Testing conditions 10 8 Test procedure . 10 8.1 General . 10 8.2 Initial test temperatures . 10 8.3 Test temperatures . 10 9 Observations and measurements 11 9.1 Genera
27、l . 11 9.2 Initial observations . 11 9.3 Test observations 11 10 Evaluation of test results . 11 10.1 Test criteria . 11 10.2 Glow-wire flammability index 12 11 Test report 12 Bibliography 13 Table 1 Initial test temperatures . 10 IEC 60695-2-12:2010 3 +AMD1:2014 CSV IEC 2014 INTERNATIONAL ELECTROTE
28、CHNICAL COMMISSION _ FIRE HAZARD TESTING Part 2-12: Glowing/hot-wire based test methods Glow-wire flammability index (GWFI) test method for materials FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnic
29、al committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, T
30、echnical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, gover
31、nmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions o
32、r agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for internationa
33、l use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to
34、promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly i
35、ndicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies
36、. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property d
37、amage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this p
38、ublication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or al
39、l such patent rights. This Consolidated version of IEC 60695-2-12 bears the edition number 2.1. It consists of the second edition (2010-10) documents 89/1017/FDIS and 89/1034/RVD and its amendment 1 (2014-02) documents 89/1198/FDIS and 89/1207/RVD. The technical content is identical to the base edit
40、ion and its amendment. In this Redline version, a vertical line in the margin shows where the technical content is modified by amendment 1. Additions and deletions are displayed in red, with deletions being struck through. A separate Final version with all changes accepted is available in this publi
41、cation. This publication has been prepared for user convenience. 4 IEC 60695-2-12:2010 +AMD1:2014 CSV IEC 2014 International Standard IEC 60695-2-12 has been prepared by technical committee 89: Fire hazard testing. It has the status of a basic safety publication in accordance with IEC Guide 104 and
42、ISO/IEC Guide 51. This standard is to be used in conjunction with IEC 60695-2-10 and IEC 60695-2-13. The main changes with respect to the previous edition are listed below: modified title; addition of an Introduction; clarification of Scope; expansion of Clause 2: Normative references; definitions a
43、dded to Clause 3; revision of Clause 4 to alignment with the IEC 60695-11 series to introduce guidance on test programs for material variations; clarification of Clause 8: Conditioning (now Clause 7); deletion of Clause 9 “Initial measurements”; expansion of Clause 10: Test procedures (now Clause 8)
44、; expansion of Clause 11: Observation and measurement (now Clause 9); clarification of Clause 12: Evaluation of test results (now Clause 10); expansion of Clause 13: Test report (now Clause 11). This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all the pa
45、rts in the IEC 60695 series, under the general title Fire hazard testing can be found on the IEC web site. Part 2 consists of the following parts: Part 2-10: Glowing/hot-wire based test methods Glow-wire apparatus and common test procedure Part 2-11: Glowing/hot-wire based test methods Glow-wire fla
46、mmability test method for end-products Part 2-12: Glowing/hot-wire based test methods Glow-wire flammability index (GWFI) test method for materials Part 2-13: Glowing/hot-wire based test methods Glow-wire ignition temperature (GWIT) test method for materials The committee has decided that the conten
47、ts of the base publication and its amendment will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or ame
48、nded. IMPORTANT The “colour inside” logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this publication using a colour printer. IEC 60695-2-12:2010 5 +AMD1:2014 CS
49、V IEC 2014 INTRODUCTION In the design of any electrotechnical product, the risk of fire and the potential hazards associated with fire need to be considered. In this respect the objective of component, circuit, and product design, as well as the choice of materials, is to reduce to acceptable levels the potential risks of fire during normal operating conditions, reason
