1、 IEC 60811-411 Edition 1.0 2012-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Electric and optical fibre cables Test methods for non-metallic materials Part 411: Miscellaneous tests Low-temperature brittleness of filling compounds Cbles lectriques et fibres optiques Mthodes dessai pour les matriaux
2、 non-mtalliques Partie 411: Essais divers Fragilit basse temprature des matires de remplissage IEC60811-411:2012 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2012 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized
3、in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional ri
4、ghts to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun p
5、rocd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coo
6、rdonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading gl
7、obal organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or
8、 an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn public
9、ations. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and e
10、lectrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on thi
11、s publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectroniq
12、ue et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec
13、.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez
14、 inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus d
15、e 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication
16、ou si vous avez des questions contactez-nous: csciec.ch. IEC 60811-411 Edition 1.0 2012-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Electric and optical fibre cables Test methods for non-metallic materials Part 411: Miscellaneous tests Low-temperature brittleness of filling compounds Cbles lectri
17、ques et fibres optiques Mthodes dessai pour les matriaux non-mtalliques Partie 411: Essais divers Fragilit basse temprature des matires de remplissage INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE H ICS 29.035.01; 29.060.20 PRICE CODE CODE PRIX ISBN 978-2-88912
18、-973-7 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via
19、 un distributeur agr. 2 60811-411 IEC:2012 CONTENTS FOREWORD . 3 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Test method . 6 4.1 General . 6 4.2 Apparatus 6 4.3 Sample and test pieces preparation. 6 4.4 Ageing procedure 7 4.5 Evaluation of the results 7 5 Test report 7 60811
20、-411 IEC:2012 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTRIC AND OPTICAL FIBRE CABLES TEST METHODS FOR NON-METALLIC MATERIALS Part 411: Miscellaneous tests Low-temperature brittleness of filling compounds FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organiza
21、tion for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC
22、 publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
23、 may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agr
24、eement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC
25、 Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are use
26、d or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the co
27、rresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible f
28、or any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees
29、and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8)
30、 Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent righ
31、ts. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60811-411 has been prepared by IEC technical committee 20: Electric cables. This Part 411 of IEC 60811 cancels and replaces Clause 6 of IEC 60811-5-1:1990, which is withdrawn. Full details
32、 of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012. 4 60811-411 IEC:2012 The text of this standard is based on the following documents: FDIS Report on voting 20/1295
33、/FDIS 20/1344/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This part of IEC 60811 shall be used in conjunction with IEC 6081
34、1-100. A list of all the parts in the IEC 60811 series, published under the general title Electric and optical fibre cables Test methods for non-metallic materials, can be found on the IEC website. Le comit a dcid que le contenu de cette publication ne sera pas modifi avant la date de stabilit indiq
35、ue sur le site web de la CEI sous “http:/webstore.iec.ch“ dans les donnes relatives la publication recherche. A cette date, la publication sera reconduite, supprime, remplace par une dition rvise, ou amende. 60811-411 IEC:2012 5 INTRODUCTION The IEC 60811 series specifies the test methods to be used
36、 for testing non-metallic materials of all types of cables. These test methods are intended to be referenced in standards for cable construction and for cable materials. NOTE 1 Non-metallic materials are typically used for insulating, sheathing, bedding, filling or taping within cables. NOTE 2 These
37、 test methods are accepted as basic and fundamental and have been developed and used over many years principally for the materials in all energy cables. They have also been widely accepted and used for other cables, in particular optical fibre cables, communication and control cables and cables for
38、ships and offshore applications. 6 60811-411 IEC:2012 ELECTRIC AND OPTICAL FIBRE CABLES TEST METHODS FOR NON-METALLIC MATERIALS Part 411: Miscellaneous tests Low-temperature brittleness of filling compounds 1 Scope This Part 411 of IEC 60811 gives the procedure to evaluate lower temperature brittlen
39、ess which typically applies to filling compounds used for communication and optical fibre cables. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited a
40、pplies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60811-100:2012, Electric and optical fibre cables Test methods for non-metallic materials Part 100: General 3 Terms and definitions For the purposes of this document, the terms and d
41、efinitions given in IEC 60811-100 apply. 4 Test method 4.1 General This part of IEC 60811 shall be used in conjunction with IEC 60811-100. This test is used to examine the adhesion between the compound and other elements of the cable. NOTE The test method does not apply to filling compounds with a d
42、rop-point higher than 80 C. 4.2 Apparatus For the purpose of this test, the different equipment used is as follows: a) strips of lead alloy of dimensions 170 mm 14 mm 0,9 mm; b) sheet brass pattern of dimensions 160 mm 160 mm 1 mm having a rectangular opening of 100 mm 10 mm and a locating edge to a
43、void movement on the strips; c) metal mandrel having a 10 mm diameter; d) cold enclosure for 10 C 1 C. 4.3 Sample and test pieces preparation From a sample of finished cable take the filling compound to be tested. Ten test pieces shall be prepared with this compound as described below. Each strip of
44、 lead alloy shall be cleaned with a wire brush and laid on a plain base. 60811-411 IEC:2012 7 The pattern is placed on the strip so that the longitudinal edges of the strip are covered symmetrically. The compound to be tested is spatulated at ambient temperature into the opening of the pattern, and
45、excess material shall be removed by a warmed spatula or other suitable device. The pattern is then removed from the strip. 4.4 Ageing procedure The test pieces shall be conditioned for at least 16 h at room temperature and then cooled to 10 C 1 C for at least 1 h. Each sample shall then immediately
46、be wound helically around a metal mandrel having a 10 mm diameter and which is fixed in a horizontal position and pre-cooled to 10 C. The rate of winding shall be about one revolution per second. 4.5 Evaluation of the results Each test piece shall be examined for cracks, with normal or corrected vis
47、ion, without magnification. Not more than two of the ten test pieces shall show cracks. If more than two samples fail, the test may be repeated one more time. NOTE A slight lifting off at the corners of the compound layer is acceptable. 5 Test report The test report shall be in accordance with that
48、given in IEC 60811-100. 8 60811-411 IEC:2012 Bibliography IEC 60811-5-1:1990, Common test methods for insulating and sheathing materials of electric cables Part 5: Methods specific to filling compounds Section One Drop-point Separation of oil Lower temperature brittleness Total acid number Absence o
49、f corrosive components Permittivity at 23 C D.C. resistivity at 23 C and 100 C (withdrawn) _ 10 60811-411 CEI:2012 SOMMAIRE AVANT-PROPOS 11 1 Domaine dapplication 14 2 Rfrences normatives . 14 3 Termes et dfinitions 14 4 Mthode dessai . 14 4.1 Gnralits 14 4.2 Appareillage 14 4.3 Prparation des chantillon
