1、 IEC 60811-507 Edition 1.0 2012-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Electric and optical fibre cables Test methods for non-metallic materials Part 507: Mechanical tests Hot set test for cross-linked materials Cbles lectriques et fibres optiques Mthodes dessai pour les matriaux non-mtalliq
2、ues Partie 507: Essais mcaniques Essai dallongement chaud pour les matriaux rticuls IEC60811-507:2012 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2012 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
3、 or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to thi
4、s publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectr
5、onique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-
6、aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organi
7、zation that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendme
8、nt might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC
9、 Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical t
10、erms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publicati
11、on or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux t
12、echnologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchp
13、ub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur
14、 les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 te
15、rmes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous
16、avez des questions contactez-nous: csciec.ch. IEC 60811-507 Edition 1.0 2012-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Electric and optical fibre cables Test methods for non-metallic materials Part 507: Mechanical tests Hot set test for cross-linked materials Cbles lectriques et fibres optiques
17、 Mthodes dessai pour les matriaux non-mtalliques Partie 507: Essais mcaniques Essai dallongement chaud pour les matriaux rticuls INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE K ICS 29.035.01; 29.060.20 PRICE CODE CODE PRIX ISBN 978-2-88912-983-6 Registered trad
18、emark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr.
19、2 60811-507 IEC:2012 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Test method . 6 4.1 General . 6 4.2 Apparatus 7 4.3 Sample and test piece preparation 7 4.4 Procedure . 7 4.5 Expression of the results . 8 5 Test report 8 Annex A (inform
20、ative) Recommended performance requirement 9 Bibliography 10 60811-507 IEC:2012 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTRIC AND OPTICAL FIBRE CABLES TEST METHODS FOR NON-METALLIC MATERIALS Part 507: Mechanical tests Hot set test for cross-linked materials FOREWORD 1) The International Ele
21、ctrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields
22、. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC N
23、ational Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization
24、 (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representati
25、on from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot
26、 be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications.
27、 Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, acces
28、s to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including indiv
29、idual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon,
30、this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of
31、this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60811-507 has been prepared by IEC technical committee 20: Electric cables. This Part 507 of IEC 60811 cancels and replaces Clause 9 o
32、f IEC 60811-2-1:1998, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100: 2012. 4 60811-507 IEC:2012 The text of this standard is based on
33、 the following documents: FDIS Report on voting 20/1303/FDIS 20/1352/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This part
34、of IEC 60811 shall be used in conjunction with IEC 60811-100. A list of all the parts in the IEC 60811 series, published under the general title Electric and optical fibre cables Test methods for non-metallic materials, can be found on the IEC website. The committee has decided that the contents of
35、this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 60811-507 IEC:2012 5 I
36、NTRODUCTION The IEC 60811 series specifies the test methods to be used for testing non-metallic materials of all types of cables. These test methods are intended to be referenced in standards for cable construction and for cable materials. NOTE 1 Non-metallic materials are typically used for insulat
37、ing, sheathing, bedding, filling or taping within cables. NOTE 2 These test methods are accepted as basic and fundamental and have been developed and used over many years principally for the materials in all energy cables. They have also been widely accepted and used for other cables, in particular
38、optical fibre cables, communication and control cables and cables for ships and offshore applications. 6 60811-507 IEC:2012 ELECTRIC AND OPTICAL FIBRE CABLES TEST METHODS FOR NON-METALLIC MATERIALS Part 507: Mechanical tests Hot set test for cross-linked materials 1 Scope This Part 507 of IEC 60811
39、gives the procedure for the hot set test, which typically applies to cross-linkable compounds used for insulating and sheathing materials. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For d
40、ated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60811-100:2012, Electric and optical fibre cables Test methods for non-metallic materials Part 100: General IEC 60811-201, Electric and optic
41、al fibre cables Test methods for non-metallic materials Part 201: General tests Measurement of insulation thicknessIEC 60811-202, Electric and optical fibre cables Test methods for non-metallic materials Part 202: General tests Measurement of thickness of non-metallic sheathsIEC 60811-401, Electric
42、and optical fibre cables Test methods for non-metallic materials Part 401: Miscellaneous tests Thermal ageing methods Ageing in an air oven IEC 60811-501, Electric and optical fibre cables Test methods for non-metallic materials Part 501: Mechanical tests Tests for determining the mechanical propert
43、ies of insulating and sheathing compounds3 Terms and definitions For the purposes of this document , the terms and definitions given in IEC 60811-100 apply. 4 Test method 4.1 General This part of IEC 60811 shall be used in conjunction IEC 60811-100. This standard gives the method for the hot set tes
44、t, which applies to crosslinked compounds. All the tests shall be carried out not less than 16 h after the extrusion or crosslinking of the insulating or sheathing compounds. 60811-507 IEC:2012 7 4.2 Apparatus The apparatus consists of the following parts: a) An oven capable of maintaining the tempe
45、rature and tolerance specified. b) Grips shall be provided, such that each test piece can be suspended from an upper grip in the oven and weights attached to a lower grip attached to the test piece. NOTE When testing tubular test pieces, the fixing of the grips should not cause air-tight sealing. Th
46、is can be achieved by inserting at least on one end a short piece of metal pin, having slightly smaller dimensions than those of the inner side of the test piece. 4.3 Sample and test piece preparation A sample of the cable or cord, or of the sheath removed from the cable, or samples of core, cut int
47、o pieces of sufficient length, shall be taken, preferably from positions close to that from which the samples for the tensile tests without ageing were taken, in accordance with IEC 60811-501. Test pieces, dumb-bell or tubular, shall be prepared according to IEC 60811-501. Two test pieces of sheath
48、and of insulation from each core, after they have been prepared and their cross-sectional areas measured, as specified in the test method of IEC 60811-201 and/or IEC 60811-202. Dumb-bell test pieces shall be prepared from the inner part of the sheath and of the insulation after any ridges and/or sem
49、i-conducting layers have been removed. The thickness shall be not less than 0,8 mm and not more than 2,0 mm. If a thickness of 0,8 mm cannot be obtained from the original sample, a minimum thickness of less than 0,8 mm is permitted; however, the greatest possible thickness shall be used. The central 20 mm for the larger dumb-bells, or 10 mm for the smaller dumb-bells, shall be
