1、 IEC 62271-211 Edition 1.0 2014-04 INTERNATIONAL STANDARD NORME INTERNATIONALE High-voltage switchgear and controlgear Part 211: Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages above 52 kV Appareillage haute tension Partie 211: Raccordement
2、s directs entre transformateurs de puissance et appareillage sous enveloppe mtallique isolation gazeuse de tensions assignes suprieures 52 kV IEC 62271-211:2014-04(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified,
3、no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC
4、copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduit
5、e ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits su
6、pplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International E
7、lectrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure
8、 that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other
9、 documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn p
10、ublications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic a
11、nd electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 14 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology en
12、tries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this
13、 publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique
14、et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome
15、 pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet d
16、e trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Jus
17、t Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi
18、que les termes quivalents dans 14 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 55 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des p
19、ublications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 622
20、71-211 Edition 1.0 2014-04 INTERNATIONAL STANDARD NORME INTERNATIONALE High-voltage switchgear and controlgear Part 211: Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages above 52 kV Appareillage haute tension Partie 211: Raccordements direct
21、s entre transformateurs de puissance et appareillage sous enveloppe mtallique isolation gazeuse de tensions assignes suprieures 52 kV INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE S ICS 29.130.10 PRICE CODE CODE PRIX ISBN 978-2-8322-1534-0 Registered trademark
22、of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC
23、62271-211:2014 IEC 2014 CONTENTS FOREWORD . 4 1 General . 6 1.1 Scope 6 1.2 Normative references . 6 2 Normal and special service conditions . 7 2.1 Normal service conditions 7 2.2 Special service conditions 7 3 Terms and definitions 7 4 Rating 8 4.1 Rated voltage (U r ) . 8 4.2 Rated insulation lev
24、el . 8 4.3 Rated frequency (f r ) . 9 4.4 Rated continuous current (I r ) and temperature rise 9 4.5 Rated short-time withstand current (I k ) and rated thermal short-time current (I th ) . 9 4.6 Rated peak withstand current (I p ) and rated dynamic current (I d ) 9 4.7 Rated duration of short-circu
25、it (t k ) and rated duration (t th ) . 9 4.8 Rated filling pressure p reof gas for insulation 9 5 Design and construction 10 5.1 Limits of supply 10 5.2 Pressure withstand requirements . 11 5.3 Gas and vacuum tightness . 11 5.4 Mechanical forces applied on the connection interface . 12 5.5 Mechanica
26、l forces applied on the bushing flange . 12 5.6 Horizontal and vertical displacement 13 5.7 Vibrations 13 6 Type tests . 14 6.1 General 14 6.2 Dielectric tests . 14 Dielectric tests of bushing . 14 6.2.1Dielectric tests of transformer connection in a single phase 6.2.2 enclosure 14 Dielectric tests
27、of transformer connection in a three phase 6.2.3 enclosure 14 6.3 Cantilever load withstand tests. 14 6.4 Gas tightness tests 15 7 Routine tests . 15 7.1 General 15 7.2 External pressure test of the bushing . 15 7.3 Tightness tests 15 8 Standard dimensions and tolerances . 15 8.1 Single-phase direct
28、 connection between oil-filled transformer and switchgear . 15 8.2 Three-phase direct connection between oil-filled transformer and switchgear . 15 8.3 Connection between gas-insulated transformer and switchgear . 16 IEC 62271-211:2014 IEC 2014 3 8.4 Transformer tolerances 16 8.5 Mounting of the tra
29、nsformer on its foundation 16 9 Information to be given with enquiries, tenders and orders 16 10 Transport, storage, erection, operation and maintenance 16 Bibliography 21 Figure 1 Typical direct connection between power transformer and gas-insulated metal-enclosed switchgear 17 Figure 2 Standard di
30、mensions for typical direct connection between power transformer and gas-insulated metal-enclosed switchgear 18 Figure 3 Transformer tolerances for a typical direct connection shown on the example of a three-phase power transformer connected to a single-phase gas- insulated metal-enclosed switchgear
31、 . 19 Figure 4 Transformer tolerances for a typical direct connection shown on the example of a three-phase power transformer connected to a three-phase gas-insulated metal-enclosed switchgear up to 170 kV . 20 Table 1 Moment and forces applied on the bushing flange and transformer . 13 4 IEC 62271-
32、211:2014 IEC 2014 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR Part 211: Direct connection between power transformers and gas- insulated metal-enclosed switchgear for rated voltages above 52 kV FOREWORD 1) The International Electrotechnical Commission (IEC) is
33、a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to o
34、ther activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in th
35、e subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditi
36、ons determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC Nation
37、al Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way
38、in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC P
39、ublication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC
40、 is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its
41、technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other
42、 IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the s
43、ubject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62271-211 has been prepared by subcommittee 17C: High-voltage switchgear and controlgear assemblies, of IEC technical committee 17: Switchgear and controlgear. This fi
44、rst edition cancels and replaces the first edition of IEC/TR 61639:1996 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) transfer from technical report to international standard; b) the minimum voltage ra
45、ting was changed from 72,5 kV to above 52 kV; c) update of normative references; d) definition of insulated junction including limit of supply; IEC 62271-211:2014 IEC 2014 5 e) definition of dielectric test of gas-insulated metal-enclosed switchgear for transformer connection in a three phase enclos
46、ure; f) addition of interface tolerances at transformer side; g) addition of transformer tolerances in service; h) addition of exceptional loads for bushings and flanges; i) consideration of oil- and gas-insulated transformers; j) inclusion of three-phase enclosed direct connections. The text of thi
47、s standard is based on the following documents: FDIS Report on voting 17C/596/FDIS 17C/600/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directiv
48、es, Part 2. A list of all parts in the IEC 62271 series, published under the general title High-voltage switchgear and controlgear, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web
49、 site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 6 IEC 62271-211:2014 IEC 2014 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR Part 211: Direct connection between power transformers and gas- insulated metal-enclosed switchgear for rated voltages above 52 kV 1 General 1.1 Scope This part
