1、 IEEE Recommended Practice for Personnel Qualifications for Installation and Maintenance of Stationary Batteries Amendment 1: Updated Safety Sections Sponsored by the Stationary Batteries Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Power and Energy Society IEEE Std 1657a-2015 (Amen
2、dment to IEEE Std 1657-2009) IEEE Std 1657a-2015 (Amendment to IEEE Std 1657-2009) IEEE Recommended Practice for Personnel Qualifications for Installation and Maintenance of Stationary Batteries Amendment 1: Updated Safety Sections Sponsor Stationary Batteries Committee of the IEEE Power and Energy
3、Society Approved 3 September 2015 IEEE-SA Standards Board Abstract: This amendment to IEEE Std 1657-2009 modifies Clause 5 as well as related annexes, and adds a new annex, primarily consisting of a flowchart that guides the user in the proper choices of personal protective equipment (PPE). Keywords
4、 IEEE 1657a, personal protective equipment, PPE The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2015 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 26 October 2015. Printed in the United
5、 States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE
6、 standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEE
7、E standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or
8、 rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of re
9、asonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NO
10、T LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR
11、RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the Englis
12、h version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its
13、committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that ind
14、ividual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards
15、 documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurr
16、ence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not r
17、espond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 U
18、SA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing
19、or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE
20、 under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering pract
21、ices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy
22、 portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to pho
23、tocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editi
24、ons or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to re
25、view at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they ha
26、ve the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the
27、 address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findst
28、ds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with
29、 respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents
30、html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain s
31、uch licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining
32、whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk o
33、f infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. Participants At the time this IEEE amendment was completed, the Battery Technician Qualification Working Group had the following membership: Curtis Ashton, Ch
34、air Edward Amato Gary Balash Christopher Belcher William Cantor Thomas Carpenter Wayne Johnson Daniel Lambert Steve McCluer James McDowall Larry Meisner James Midolo Mike Nispel John Polenz Shawn Pryer Randy Schubert Richard Tressler Lesley Varga The following members of the individual balloting com
35、mittee voted on this amendment. Balloters may have voted for approval, disapproval, or abstention. Samuel Aguirre Steven Alexanderson Edward Amato Curtis Ashton Gary Balash Robert Beavers Christopher Belcher Thomas Blair Derek Brown Kent Brown William Cantor Paul Cardinal Thomas Carpenter Troy Chatw
36、in Charles Cotton Ray Davis Peter Demar Gary Donner Neal Dowling Donald Dunn Kevin Fellhoelter Frank Gerleve Randall Groves Ajit Gwal Werner Hoelzl Alan Jensen Thomas Koshy Jim Kulchisky Chung-Yiu Lam Daniel Lambert Daniel Levin Jon Loeliger John Mcalhaney, Jr. William McBride William McCoy James Mc
37、Dowall Larry Meisner James Midolo Dennis Neitzel Arthur Neubauer Michael Newman Joe Nims Gary Nissen Bansi Patel Christopher Petrola Michael Roberts Bartien Sayogo Christo Searles Robert Seitz Jerry Smith Wayne Timm Richard Tressler Lesley Varga John Vergis Donald Wengerter Kenneth White Iain Wright
38、 Dean Yager Jian Yu Luis Zambrano Copyright 2015 IEEE. All rights reserved. vi When the IEEE-SA Standards Board approved this amendment on 3 September 2015, it had the following membership: John D. Kulick, Chair Jon Walter Rosdahl, Vice Chair Richard H. Hulett, Past Chair Konstantinos Karachalios, S
39、ecretary Masayuki Ariyoshi Ted Burse Stephen Dukes Jean-Philippe Faure J. Travis Griffith Gary Hoffman Michael Janezic Joseph L. Koepfinger* David J. Law Hung Ling Andrew Myles T. W. Olsen Glenn Parsons Ronald C. Petersen Annette D. Reilly Stephen J. Shellhammer Adrian P. Stephens Yatin Trivedi Phil
40、lip Winston Don Wright Yu Yuan Daidi Zhong *Member Emeritus Copyright 2015 IEEE. All rights reserved. vii Introduction This introduction is not part of IEEE Std 1657a-2015, IEEE Recommended Practice for Personnel Qualifications for Installation and Maintenance of Stationary BatteriesAmendment 1: Upd
41、ated Safety Sections. IEEE Std 1657-2009 defined the areas of recommended knowledge for installers and maintainers of stationary batteries and related systems to the extent that they affect the battery. Design of the dc system and sizing of the dc battery charger(s) were beyond the scope of this rec
42、ommended practice. The document covers lead-acid and nickel-cadmium battery technologies. This amendment to that recommended practice modifies Clause 5 as well as related annexes, and adds a new annex, primarily consisting of a flowchart that guides the user in the proper choices of personal protect
43、ive equipment (PPE). viii Copyright 2015 IEEE. All rights reserved. ix Copyright 2015 IEEE. All rights reserved. Contents 3. Definitions, abbreviations, and acronyms 2 3.2 Abbreviations and acronyms 2 5. Safety 2 5.1 Work environment . 2 5.2 Personal protective equipment (PPE) . 2 5.3 Electrical sho
44、ck hazards . 3 5.4 Insulation 4 5.8 Ventilation 4 5.11 Battery fire safety concerns 4 8. Maintenance 4 8.1 Applicable codes and standards . 4 Annex C (informative) Voltage and current effects on the human body 5 Annex F (normative) Task-level summary tables . 8 Annex H (informative) Battery PPE deci
45、sion flowchart 9 Annex J (informative) Bibliography . 10 IEEE Recommended Practice for Personnel Qualifications for Installation and Maintenance of Stationary Batteries Amendment 1: Updated Safety Sections IMPORTANT NOTICE: IEEE Standards documents are not intended to ensure safety, security, health
46、 or environmental protection, or ensure against interference with or from other devices or networks. Implementers of IEEE Standards documents are responsible for determining and complying with all appropriate safety, security, environmental, health, and interference protection practices and all app
47、licable laws and regulations. This IEEE document is made available for use subject to important notices and legal disclaimers. These notices and disclaimers appear in all publications containing this document and may be found under the heading “Important Notice” or “Important Notices and Disclaimers
48、 Concerning IEEE Documents.” They can also be obtained on request from IEEE or viewed at http:/standards.ieee.org/IPR/disclaimers.html. NOTEThe editing instructions contained in this amendment define how to merge the material contained therein into the existing base standard and its amendments to fo
49、rm the comprehensive standard.1The editing instructions are shown in bold italic. Four editing instructions are used: change, delete, insert, and replace. Change is used to make corrections in existing text or tables. The editing instruction specifies the location of the change and describes what is being changed by using strikethrough (to remove old material) and underscore (to add new material). Delete removes existing material. Insert adds new material without disturbing the existing material. Insertions may require renumbering. If so, renumbering instructions ar
