1、IEEE Standard for Risk-Informed Categorization and Treatment of Electrical and Electronic Equipment at Nuclear Power Generating Stations and Other Nuclear Facilities IEEE Std 1819-2016 IEEE Power and Energy Society Sponsored by the Nuclear Power Engineering Committee IEEE 3 Park Avenue New York, NY
2、10016-5997 USAIEEE Std 1819-2016 IEEE Standard for Risk-Informed Categorization and Treatment of Electrical and Electronic Equipment at Nuclear Power Generating Stations and Other Nuclear Facilities Sponsor Nuclear Power Engineering Committee of the IEEE Power and Energy Society Approved 22 Septembe
3、r 2016 IEEE-SA Standards BoardAbstract: Risk-informed methods have been established to appropriately categorize components as either safety significant or low safety significant. Application of these methods has been shown to be safety-beneficial for existing nuclear power generating stations and nu
4、clear facilities. No standardized approach currently exists for the detailed application of these methods to electrical and electronic components. The results of the categorization process are not easily integrated with traditional Class 1E/non-Class 1E classifications or the resulting treatment for
5、 these components. In this standard, methods are provided to categorize electrical and electronic components using a risk-informed process and identify how the categorization results relate to Class 1E/non-Class 1E classifications. Also provided in this standard is a standardized and accepted method
6、 for alternate treatment of categorized components commensurate with their safety significance. Keywords: categorization, IEEE 1819, risk-informed, safety significance, treatment The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2017 by
7、 The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 12 May 2017. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or c
8、ompleteness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are
9、no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art
10、 and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another
11、 Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropri- ate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO
12、EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY , OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCURE- MENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY , WHETH
13、ER IN CON- TRACT, STRICT LIABILITY , OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.4 Copyright 2017 IEEE. All rights
14、 reserved. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or o
15、ral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, semi
16、nars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents a
17、re welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertain- ing to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appro
18、priate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concur- rence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordi- nating Co
19、mmittees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welc
20、ome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compli
21、ance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory require- ments. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend
22、 to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety o
23、f both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adop- tion by public authorities and private use
24、rs, IEEE does not waive any rights in copyright to the documents.5 Copyright 2017 IEEE. All rights reserved. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational in
25、ternal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Ser- vice, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroo
26、m use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of ame
27、ndments, corri- genda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten y
28、ears old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine
29、 whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at http:/ ieeexplore .ieee .or g/ or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standa
30、rds development process, visit the IEEE-SA Website at http:/ standards .ieee .or g. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/ standards .ieee .org/ findstds/ errata/ index .html. Users are encouraged to check this URL for errata
31、 periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connectio
32、n therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE- SA Website at http:/ standards .ieee .or g/ about/ sasb/ patcom/ patents .html. Letters of Assurance may indicate whether the Submitte
33、r is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrim- ination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a
34、 Letter of Assurance has not been received. The IEEE is not re- sponsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in con
35、nection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the valid- ity of any patent rights, and the risk of infringement of such rights, is entirely their own re
36、sponsibility. Further information may be obtained from the IEEE Standards Association.6 Copyright 2017 IEEE. All rights reserved. Participants At the time this standard was completed, the Testing Working Group had the following membership: Y vonne Williams, Chair Gopal Aravapalli (corresponding) Geo
37、rge Ballassi John Beatty Thomas Carrier (alternate) Ralph Chackal Suresh Channarasappa Tom Crawford Marie Cuvelier (corresponding) Ali Daneshpooy (corresponding) Hamid Heidarisafa (corresponding) Sharon Honecker (corresponding) Steven Hutchins (corresponding) Jacob Kulangara James K. Liming Kirklyn
38、Melson Edward Mohtashemi Joseph Napper (corresponding) Patrick ORegan James Parello (corresponding) Vish Patel Sheila Ray Ted Riccio Craig Sellers (corresponding) Barry Sloane (corresponding) John Stevens John Taylor (corresponding) Kiang Zee At the time this standard was completed, the Operations,
39、Surveillance, Aging, Reliability, and Testing Sub- committee (SC-3) had the following membership: Y vonne Williams, Chair Tom Crawford, Vice Chair Gopal Aravapalli (corresponding) George Ballassi John Beatty Thomas Carrier (alternate) Suresh Channarasappa Marie Cuvelier (corresponding) John Erinc Ed
40、ward Eustace Hamid Heidarisafa (corresponding) Sharon Honecker (corresponding) Steven Hutchins (corresponding) Jacob Kulangara James K. Liming Kirklyn Melson Edward Mohtashemi Joseph Napper (corresponding) James Parello (corresponding) Vish Patel Sheila Ray Ted Riccio Rebecca Steinman Craig Sellers
41、corresponding) John Stevens John Taylor (corresponding) Kiang Zee At the time this standard was completed, the Nuclear Power Engineering Committee (NPEC) had the follow- ing membership: Stephen Fleger, Chair Thomas Koshy, Vice Chair Daryl Harmon, Secretary Satish Aggarwal Ijaz Ahmad George Attarian
42、 George Ballassi Royce Beacom Mark Bowman Keith Bush Robert Carruth John Carter Suresh Channarasappa Paul Colaianni Tom Crawford Dennis Dellinger David Desaulniers John Disosway Kenneth Fleischer Robert Fletcher Robert Francis Cristopher Georgeson James Gleason Dale Goodney Robert Hall David Herrell Dirk Hopp Greg Hostetter Steven Hutchins Gary Johnson Chris Kerr Wolfgang Koenig Robert Konnik
