1、 INTERNATIONAL STANDARD ISO 10303-242:2014 TECHNICAL CORRIGENDUM 1 Published 2016-08-01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATIONIndustrial automation systems and integration Product data representation and exchange Part 242: Application protocol: Ma
2、naged model-based 3D engineering TECHNICAL CORRIGENDUM 1 Systmes dautomatisation industrielle et intgration Reprsentation et change de donnes de produits Partie 242: Protocole dapplication: Gestion des modles 3D dingnierie RECTIFICATIF TECHNIQUE 1 Technical Corrigendum 1 to ISO 10303-242:2014 was pr
3、epared by Technical Committee ISO/TC 184, Automation systems and integration, Subcommittee SC 4, Industrial data. The purpose of the modifications to the text of ISO 10303-242:2014 is to replace references to ISO 10303-3001 with references to the second edition of this part of ISO 10303, to replace
4、references to SMRLv6 with references to SMRLv7, and to update the document identifier in Annex E. ICS 25.040.40 Ref. No. ISO 10303-242:2014/Cor.1:2016(E) ISO 2016 All rights reserved Published in Switzerland ISO 10303-242:2014/Cor.1:2016(E) 2 ISO 2016 All rights reservedModifications to the text of
5、ISO 10303-242:2014 Foreword Replace the sixth paragraph with the following: Technical Corrigendum 1 to ISO 10303-242 is based upon version 7 of the STEP Module and Resource Library (SMRLv7). Clause 4.3 Replace references to ISO/TS 10303-3001 in the second, third and fifth paragraphs with references
6、to the second edition of this part of ISO 10303. Clause A.3 Replace reference to the BO Model EXPRESS expanded listing with reference to the listing of the second edition of this part of ISO 10303. Replace reference to ISO/TS 10303-3001 with reference to the second edition of this part of ISO 10303.
7、 Clause A.4 Replace reference to the BO Model XML Schema listing with reference to the listing of the second edition of this part of ISO 10303. Replace reference to ISO/TS 10303-3001 with reference to the second edition of this part of ISO 10303. Clause A.5 Replace reference to the BO Model XSD Conf
8、iguration listing with reference to the listing of the second edition of this part of ISO 10303. Replace reference to ISO/TS 10303-3001 with reference to the second edition of this part of ISO 10303. Annex E With the changes identified in this Technical Corrigendum, the document identifier for this
9、part of ISO 10303 has changed. Remove the object identifier for the document and replace with the following: iso standard 10303 part(242) version(2) Annex G, Table G.1 With the changes identified in this Technical Corrigendum, the EXPRESS and XML schema contained in digital form is incorrect. In the last three rows of Table G.1, replace the Identifier with the following: Identifier ISO/TC 184/SC 4/WG 12 N9145 ISO/TC 184/SC 4/WG 12 N9146 ISO/TC 184/SC 4/WG 12 N9147
