1、ICS 75.180.20 Ref. No. ISO 13704:2007/Cor.1:2008(E) ISO 2008 All rights reserved Published in Switzerland INTERNATIONAL STANDARD ISO 13704:2007 TECHNICAL CORRIGENDUM 1 Published 2008-06-15 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATIONPetroleum, petrochem
2、ical and natural gas industries Calculation of heater-tube thickness in petroleum refineries TECHNICAL CORRIGENDUM 1 Industries du ptrole, de la ptrochimie et du gaz naturel Calcul de lpaisseur des tubes de fours de raffineries de ptrole RECTIFICATIF TECHNIQUE 1 Technical Corrigendum 1 to ISO 13704:
3、2007 was prepared by Technical Committee ISO/TC 67, Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries, Subcommittee SC 6, Processing equipment and systems. Page 61, Figure E.11: Replace term on the horizontal axis in the upper right-hand corner with
4、 the following: (T d+ 273) (30 + lg t DL ) 103 Pages 62 to 69, Figures E.12 to E.19: Replace term on the horizontal axis in the upper right-hand corner with the following: (T d+ 273) (15 + lg t DL ) 103 Page 81, Figure F.11: Replace term on the horizontal axis in the upper right-hand corner with the following: (T d+ 460) (30 + lg t DL ) 103 ISO 13704:2007/Cor.1:2008(E) 2 ISO 2008 All rights reservedPages 82 to 89, Figures F.12 through F.19 Replace term on the horizontal axis in the upper right-hand corner with the following: (T d+ 460) (15 + lg t DL ) 103
