JB T 13282-2017 《液压胶管剥胶机》.pdf

相关资源

MSZ 118-1980 《胶管连接端口》.pdf

CSN ON 63 5330-1964 《胶管 用于气体和液体的无压胶管（不含插入物）》.pdf

GB T 5562-1985 胶管胶层物理试验方法.pdf

MNOSZ 11075-1953 《蒸汽胶管》.pdf

GB 4491-1993 输血胶管.pdf

MSZ 11057-1968 《胶管检测》.pdf

CB 562-1968 胶管螺纹接头.pdf

GB 4491-1993 橡胶输血胶管.pdf

GB 4491-2003 橡胶输血胶管.pdf

猜你喜欢

FORD WSD-M2D384-A1-2004 THERMOPLASTIC POLYESTER ETHER ELASTOMER (TEEE) 90 DUROMETER A HARDNESS GENERAL PURPOSE TO BE USED WITH FORD WSS-M99P1111-A 《通用硬度为90 A的热塑性聚酯乙醚弹性体(TEEE) 与标.pdf

FORD WSD-M2D386-A2-2009 SILICONE RUBBER (MQ) SELF-LUBRICATED POLYCARBONATE (PC) COMPATIBLE TO BE USED WITH FORD WSS-M99P1111-A 《与聚碳酸酯（PC）相容的自动润滑型硅橡胶（MQ） 与标准FORD WSS-M99P1111-A一起.pdf

FORD WSD-M2D393-A2-2009 SILICONE (VMQ) RUBBER HIGH TEMPERATURE RESISTANT HIGH ELONGATION 45 HARDNESS (IRHD) LONG-LIFE GASKET TO BE USED WITH FORD WSS-M99P1111-A 《长寿命垫片用IRHD硬度为45的.pdf

FORD WSD-M2D401-A-2004 FLUOROELASTOMER (FKM) OXYGENATED OXIDIZED FUEL RESISTANT COMPRESSION STRESS RELAXATION RESISTANT O-RING TO BE USED WITH FORD WSS-M99P1111-A 《耐充氧 氧化燃料的氟橡胶(F.pdf

FORD WSD-M2D401-A4-2004 O-RING EPICHLOROHYDRIN RUBBER (ECO) 65 IRHD COMPRESSIVE STRESS RELAXATION RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《IRHD硬度为65的耐压缩应力松弛的氯醇橡胶(ECO)O形环 与.pdf

FORD WSD-M2D404-A1-2009 POLYURETHANE ELASTOMER (PUR) REACTION INJECTION MOLDED (RIM) GLASS ENCAPSULATION 80 IRHD TO BE USED WITH FORD WSS-M99P1111-A 《IRHD硬度为80的玻璃封闭的聚氨酯(PUR)弹性体反应.pdf

FORD WSD-M2D404-A2-2009 POLYURETHANE ELASTOMER (PUR) REACTION INJECTION MOLDED (RIM) GLASS ENCAPSULATION 90 IRHD TO BE USED WITH FORD WSS-M99P1111-A 《IRHD硬度为90的玻璃封闭的聚氨酯(PUR)弹性体反应.pdf

FORD WSD-M2D405-A1-2007 RUBBER ETHYLENE PROPYLENE (EPDM) SOLID WEATHERSTRIPS HARDNESS 60 IRHD - TO BE USED WITH FORD WSS-M99P1111-A 《IRHD硬度为60的实心挡风雨条用乙烯 丙烯三元乙丙橡胶(EPDM)橡胶 与标准FORD.pdf

FORD WSD-M2D405-A2-2007 RUBBER ETHYLENE PROPYLENE (EPDM) SOLID WEATHERSTRIPS HARDNESS 70 IRHD - TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSD-M2D405-A1)《硬度为70 IRHD的实心挡风雨.pdf