YS T 1039-2015 《挠性印制线路板用压延铜箔》.pdf

相关资源

YS T 649-2018 铜及铜合金挤制棒.pdf

YS T 679-2018 非本征半导体中少数载流子扩散长度的测试表面光电压法.pdf

YS T 662-2018 铜及铜合金挤制管.pdf

YS T 540.7-2018 钒化学分析方法第7部分：氧量的测定惰气熔融红外吸收法.pdf

YS T 988-2014 羧乙基锗倍半氧化物.pdf

YS T 540.5-2018 钒化学分析方法第5部分：杂质元素测定电感耦合等离子体原子发射光谱法.pdf

YS T 1288.3-2018 高纯锌化学分析方法第3部分：砷量的测定 氢化物发生-原子荧光光谱法.pdf

YS T 79-2018 硬质合金焊接刀片.pdf

YS T 584-2018 电极材料用铬、锆铜棒材.pdf

YS T 699-2018 铝电解用石墨化阴极炭块.pdf

猜你喜欢

BS 4G 198-3-1999 Sleeves and moulded components for aircraft electric cables and equipment wires Specification for heat-shrinkable sleeving for binding insulation and identificatio.pdf

BS 4G 229-1996 Schedule for environmental conditions and test procedures for airborne equipment《机载设备环境条件和试验规程一览表》.pdf

BS 4HR 601-2010 Specification for nickel-chromium-titanium-aluminium heat-resisting alloy bar and wire (maximum diameter or minor sectional dimension of 30 mm) for the manufacture .pdf

BS 4J 10-1991 Specification for pressure-sensitive adhesive water resistant PVC tape《耐水压敏PVC胶粘带规范》.pdf

BS 4J 11-1991 Specification for pressure-sensitive adhesive paper masking tape《压敏胶粘纸带规范》.pdf

BS 4L 54-1986 Specification for tube of 99% aluminium (cold drawn seamless tested hydraulically) (not exceeding 12 mm wall thickness)《99%铝管规范(冷拔 无缝 液压试验)(壁厚不超过12mm)》.pdf

BS 4L 56-1986 Specification for tube of aluminium-21 4% magnesium alloy (temper designation-O) (seamless tested hydraulically) (not exceeding 12 mm wall thickness)《铝-2%镁合金管规范(强度符号-.pdf

BS 4N 100-1-1999 Aircraft oxygen nsystems and nequipment — nPart 1 Design and installation《飞行器供氧系统和设备 设计和安装》.pdf

BS 4N 100-2-1999 Aircraft oxygen systems and equipment - Tests for the compatibility of materials in the presence of oxygen《飞行器供氧系统和设备 在有氧气情况下材料的兼容性试验》.pdf