MNOSZ 12386-1952 《青铜半产品铝青铜》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ISO 13061-1-2014 Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 1 Determination of moisture content for physica.pdf

ISO 13061-13-2016 Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 13 Determination of radial and tangential shri.pdf

ISO 13061-14-2016 Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 14 Determination of volumetric shrinkage《木材的物理.pdf

ISO 13061-2-2014 Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 2 Determination of density for physical and mec.pdf

ISO 13061-3-2014 Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 3 Determination of ultimate strength in static .pdf

ISO 13061-4-2014 Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 4 Determination of modulus of elasticity in sta.pdf

ISO 13061-6-2014 Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 6 Determination of ultimate tensile stress para.pdf

ISO 13061-7-2014 Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 7 Determination of ultimate tensile stress perp.pdf

ISO 1307-2006 Rubber and plastics hoses - Hose sizes minimum and maximum inside diameters and tolerances on cut-to-length hoses《橡胶和塑料软管 软管大小、最小和最大内径及长软管切割公差》.pdf