MNOSZ 15587-1953 《旋光管》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ISO 2857 AMD 1-1984 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches manufacturing tolerances on the thread.pdf

ISO 2857 AMD 2-1986 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches manufacturing tolerances on the thread.pdf

ISO 2857 CORR 1-1990 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches manufacturing tolerances on the threa.pdf

ISO 2857-1973 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches Manufacturing tolerances on the threaded por.pdf

ISO 2859-1-1999 Sampling procedures for inspection by attributes - Part 1 Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection《计.pdf

ISO 2859-2-1985 Sampling procedures for inspection by attributes Part 2 Sampling plans indexed by limiting quality (LQ) for isolated lot inspection《计数抽样检验程序 第2部.pdf

ISO 2859-3-2005 Sampling procedures for inspection by attributes - Part 3 Skip-lot sampling procedures《计数抽样检验程序 第3部分 跳批抽样检验程序》.pdf

ISO 2859-4-2002 Sampling procedures for inspection by attributes - Part 4 Procedures for assessment of declared quality levels《计数抽样检验程序 第4部分 声明质量级的评定程序》.pdf

ISO 2859-5-2005 Sampling procedures for inspection by attributes - Part 5 System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-.pdf