MNOSZ 17721-1954 《异型钢轧制特殊设备》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SNV 37102-1966 《铜或铝制圆线和绳索 结构和尺寸》.pdf

SNV 37103-1966 《焊缝坡口加工 钢材的接缝形状 埋弧焊》.pdf

SNV 37104-1966 《火情自动探测系统的组件 第7部分：点型感烟探测器 使用散射光，透射光或电离作用的探测器》.pdf

SNV 37105-1966 《锥形接续器 锥角和锥形接续器》.pdf

SNV 37106-1966 《折叠封口的保存盒盖 直径 99 mm》.pdf

SNV 37107-1966 《管道 法兰类型，标称压力以及标称尺寸范围 总表》.pdf

SNV 37108-1966 《固定联轴器 型号 R（摩擦阻力）带有套筒，适用于圆锥形轴端 1）螺栓圆周直径的主要尺寸 k =48 190 mm》.pdf

SNV 37109-1966 《焊接 电弧焊附加材料（电极）技术供货条件》.pdf

SNV 40138-1959 《建筑内能源380 1规定的气候数据》.pdf