MNOSZ 19733-1956 《液压移动设备，压力灌溉机，承压力在750 4000公斤之间》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 5900-2014 Confectionery Methods for determination of moisture and solids《糖果糕点 水分和固体的测定方法》.pdf

GOST 5901-2014 Confectionery Methods for determination of ash and metal magnetic admixture mass fraction《糖果糕点 灰分和金属磁掺合料质量分数的测定方法》.pdf

GOST 5905-2004 Metal chrome Technical requirements and conditions of delivery《金属烙 技术条件》.pdf

GOST 591-1969 Chain transmission sprocket wheels for roller chains Methods of calculation and construction of tooth profile and cutting tool form Tolerances《套筒滚子传动链轮 齿形和工具设计及计算方法 公.pdf

GOST 5919-1973 Hexagon thin slotted and castle nuts accuracy class B Construction and dimensions《六角槽形及冠状扁螺母(普通精度) 结构及尺寸》.pdf

GOST 592-1981 Chain wheels for plate link chains Methods of calculation and construction of teeth profile Tolerances《片式链轮 齿形计算及设计方法 极限偏差》.pdf

GOST 593-1975 Wheers for detachable pulling chains Methods of design and construction of tooth profile Tolerances《可拆式牵引链链轮 齿形设计与计算方法 公差》.pdf

GOST 5932-1973 Hexagon slotted and castle nuts accuracy class A Construction and dimensions《六角槽形及冠状螺母(高精度) 结构及尺寸》.pdf

GOST 5933-1973 Hexagon thin slotted and castle nuts accuracy class A Construction and dimensions《六角槽形及冠状扁螺母(高精度) 结构及尺寸》.pdf