MNOSZ 8840-1955 《直的烟道》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESB-M4D576-A-2010 POLYARYLATE (PAR) MOLDING COMPOUND HIGH HEAT RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《耐高温聚芳酯（PAR）成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4D585-A-2008 ABS POLYCARBONATE BLEND (ABS + PC) IMPACT MODIFIED TO BE USED WITH FORD WSS-M99P1111-A 《冲击改性丙烯腈-丁二烯-苯乙烯共聚物(ABS) 聚碳酸酯混合物(ABS+PC)混合物 与标准FORD WSS-M99P1111-A一.pdf

FORD ESB-M4D605-A-2010 POLYPROPYLENE (PP) IMPACT MODIFIED HEAT STABILIZED 10 % CALCIUM CARBONATE FILLED TO BE USED WITH FORD WSS-M99P1111-A 《10%碳酸钙填充的受热稳定的冲击改性聚丙烯(PP) 与标准FORD WS.pdf

FORD ESB-M4D606-A-2010 POLYPROPYLENE (PP) HOMOPOLYMER 13 % TALC FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《13%滑石粉填充的聚丙烯（PP）均聚物成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4D74-A-2008 POLYETHYLENE HIGH DENSITY INJECTION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《高密度聚乙烯注塑成型料 与标准FORD WSS-M99P1111-A一起使用 [使用 FORD WSG-M4D901-A1 FO.pdf

FORD ESB-M4D75-A-2009 POLYURETHANE FOAM HIGH DENSITY TO BE USED WITH FORD WSS-M99P1111-A 《高密度聚氨酯泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4D9-A11-1988 ACRYLIC (PMMA) HIGH IMPACT RESISTANT EXTERIOR - OPTICAL GRADE《汽车外部用光学级高抗冲聚甲基丙烯酸甲酯（PMMA）》.pdf

FORD ESB-M4D9-A2-2007 ACRYLIC MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《丙烯酸系树脂成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4G151-A-2014 SEALER POLYURETHANE FOAM - RESIN SATURATED TO BE USED WITH FORD WSS-M99P1111-A .pdf