MNOSZ 9290-1952 《石料切割工具 粗加工斧子》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ISO 6361-1-2011 Wrought aluminium and aluminium alloys - Sheets strips and plates - Part 1 Technical conditions for inspection and delivery《熟铝和铝合金 薄板材 带材和板材 第1部.pdf

ISO 6361-5-2011 Wrought aluminium and aluminium alloys - Sheets strips and plates - Part 5 Chemical composition《熟铝和铝合金 薄板材 带材和板材 第5部分 化学成分》.pdf

ISO 6362-1-2012 Wrought aluminium and aluminium alloys - Extruded rods bars tubes and profiles - Part 1 Technical conditions for inspection and delivery《加工铝和铝合金.pdf

ISO 6362-3-2012 Wrought aluminium and aluminium alloys - Extruded rods bars tubes and profiles - Part 3 Extruded rectangular bars - Tolerances on shape and dime.pdf

ISO 6362-4-2012 Wrought aluminium and aluminium alloys - Extruded rods bars tubes and profiles - Part 4 Profiles - Tolerances on shape and dimensions《加工铝和铝合金挤压棒.pdf

ISO 6362-5-2012 Wrought aluminium and aluminium alloys - Extruded rods bars tubes and profiles - Part 5 Round square and hexagonal bars - Tolerances on shape an.pdf

ISO 6363-1-2012 Wrought aluminium and aluminium alloys - Cold-drawn rods bars tubes and wires - Part 1 Technical conditions for inspection and delivery《加工铝和铝合金冷.pdf

ISO 6363-2-2012 Wrought aluminium and aluminium alloys - Cold-drawn rods bars and tubes and wires - Part 2 Mechanical properties《加工铝和铝合金冷拉棒 条材和管材 第2部分 力学性能》.pdf

ISO 6363-3-2012 Wrought aluminium and aluminium alloys - Cold-drawn rods bars tubes and wires - Part 3 Drawn round bars and wires - Tolerances on form and dimen.pdf