STAS 11341-1979 TURBINE MINERAL OILS Determination of air elimination capacity《透平矿物油空气消除能力的测定 》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JIS Z 3198-2-2003 无铅焊剂的试验方法 第2部 分机械拉伸特性的试验方法.pdf

JIS Z 3198-3-2003 Test methods for lead-free solders Part3 Methods of spread test.pdf

JIS Z 3198-4 Test methods for lead-free solder - Part4 Methods for solderability test by a wetting balance method and a contact angle method.pdf

JIS Z 3198-5 Test methods for lead-free solders –Part 5 Methods for tensile tests and shear on solder joints.pdf

JIS Z 3198-6 Test methods for lead-free solders –Part 6 Methods for 45 degree pull test of solder joint on QFP lead.pdf

JIS Z 3200-2005 焊接消耗品.焊接填充材料的交货技术条件.产品类型、尺寸、公差和标记.pdf

JIS Z 3201：2001 Gas welding rods for mild steel.pdf

JIS Z 3202 AMD 1-2007 铜和铜合金气焊条(修改件1).pdf

JIS Z 3202-1999 铜及铜合金气焊条.pdf