STAS SR EN 2082-1+A1-1995 Aerospace series Aluminkjm alloy forging stock and forgings Technical specification Part 1 General requirements《航空航天系列 铝合金锻坯和锻件 技术规范 第1部分：一般要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB 325-1991 包装容器 钢桶.pdf

GB 3265-1995 内扣式消防接口.pdf

GB 3304-1991 中国各民族名称的罗马字母拼写法和代码.pdf

GB 3309-1989 高压开关设备常温下的机械试验.pdf

GB 3311-1982 钨铈合金中铈的测定 氧化还原容量法.pdf

GB 3312-1982 钨钍合金中二氧化钍的测定 重量法.pdf

GB 3314-1982 内燃机车通用技术条件.pdf

GB 3315-1982 内燃机车组装后的检查与试验规则.pdf

GB 3316-1982 内燃机车功率确定方法.pdf