STAS 9904 14-1984 ELECTRICAL ROTATING ALACIILNES Methods of test Measurement of the winding resistance without switching the machme from the network《旋转电机 测试方法，不需要将机器从网络中切换出对绕组电阻进行测.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SJ 1.8-1987 电子工业技术标准制修订工作 有关规定和要求 标准草案编写时应遵循的要求.pdf

SJ 1000-1975 双动冲床引伸模 引伸凸模.pdf

SJ 1001-1975 首次引伸压边圈.pdf

SJ 1002-1975 以后各次引伸压边圈.pdf

SJ 1003-1975 双动冲床引伸模 通用模架.pdf

SJ 1004-1975 双动冲床引伸模 上托.pdf

SJ 1005-1975 双动冲床引伸模 底座.pdf

SJ 1006-1975 双动冲床引伸模 下压板.pdf

SJ 1007-1975 双动冲床引伸模 上压板.pdf