AIA NAS 8804-1982 Bolt 100 Degree Reduced Head Phillips Recess Close Tolerance 6AL-4V Titanium Alloy Short Thread.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

STAS SR EN 23312-1995 Sintered metal materials and hardmetals Determination of Young modulus《烧结金属材料和硬金属．杨氏模量的测定》.pdf

STAS SR EN 23326-1995 Hardmetals Determination of (the magnetization) coercivity《硬性金属，（磁化）矫顽磁性测定》.pdf

STAS SR EN 23369-1995 Impermeable sintered metal materials and hardmetals Determination of density《不透水烧结金属材料和硬金属．密度的测定》.pdf

STAS SR EN 23758-1996 Textiles - Care labelling code using simbols《织物．用符号标记的保护标签 》.pdf

STAS SR EN 23907-1995 Hardmetals Determination of total carbon content Gravimetric method《硬质合金．总碳量的测定．重量法》.pdf

STAS SR EN 23908-1995 Hardmetals Determination of insoluble (free) carbon con-tent Gravimetric method《硬质合金．不溶的（不受……影响的）碳含量的测定．重量法》.pdf

STAS SR EN 23927-1994 Metallic powders excluding powders for hardmetals Determination of compactibility (compressibility) in uniaxial compression《金属粉末，硬质合金粉末除外．单轴压缩下压实性（可压缩性）的测定》.pdf

STAS SR EN 23954-1994 Powders for powder metallurgical purposes — Sampling《粉末冶金用粉末．取样 》.pdf

STAS SR EN 23995-1994 Metallic powders Determination of green strength by transverse rupture of rectangular compacts《金属粉末．矩形坯块的横向断裂的生强度的测定》.pdf