1、C22.2 No. 49-14Flexible cords and cablesLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied vi
2、ewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis docu
3、ment is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys
4、 intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT S
5、HALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LO
6、ST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN AD
7、VISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another p
8、erson or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document.
9、 CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA G
10、roup and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that
11、 may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/or others intellect
12、ual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the pos
13、sibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their
14、own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:sLOADTHISDOCUMENTONTOACOMPUTERFORTHESOLEPURPOSEOFREVIE
15、WINGITsSEARCHANDBROWSETHISDOCUMENTANDsPRINTTHISDOCUMENTIFITISIN0$ relevant clause, table and/or figurenumber; wording of the proposed change; and rationale for the change.To purchase CSA Group Standards and related publications, visit CSA Groups Online Store atshop.csa.ca or call toll-free 1-800-463
16、-6727 or 416-747-4044.Copyright 2014 Underwriters Laboratories Inc.ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standardshould be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regardingthose Standards shall remain th
17、e sole and exclusive property of UL.This ANSI/UL Standard for Safety consists of the Nineteenth Edition. The most recent designation ofANSI/UL 62 as an American National Standard (ANSI) occurred on March 14, 2014. ANSI approval fora standard does not include the Cover Page, Transmittal Pages, Title
18、Page (front and back), or thePreface. Any other portions of this ANSI/UL standard that were not processed in accordance withANSI/UL requirements are noted at the beginning of the impacted sections.The Department of Defense (DoD) has adopted UL 62 on November 6, 1987. The publication of revisedpages
19、or a new edition of this Standard will not invalidate the DoD adoption.Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time.Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative StandardsDevelopment System (CSDS) at http:/.To
20、purchase UL Standards, visit Comm 2000 at http:/m- call toll-free 1-888-853-3503.CONTENTSPREFACE 41 Scope .61.1 General .61.2 Products included 61.3 National differences .62 Reference publications 73 Definitions and units of measurement .93.1 Definitions .93.2 Units of measurement 114 Construction r
21、equirements 114.1 General construction requirements 114.2 Thermoset-insulated cords (including range and dryer cords and special-use cords CuandPDu) .214.3 Thermoplastic-insulated cords (including decorative and range and dryer cords) 244.4 Heater cords HSJOO, HSJOOW, HSJO, HSJOW, HSJ, HPN, and HPDu
22、.274.5 Tinsel cords (TST, TPT, shaver cordu) .294.6 Elevator travelling cables Types E, EO, ETT, and ETP .324.7 Hoistway cables .364.8 Electric vehicle cables .395 Performance and test requirements 415.1 Physical properties 415.2 Electrical properties 535.3 Tests for hoistway cables .576 Marking .58
23、6.1 General 586.2 Product marking .596.3 Optional markings .616.4 Package marking 626.5 Hoistway cables .636.6 Recreational vehicle cord .646.7 Mobile home and recreational vehicle cord .64Tables 66Figures 121Annex A (normative) Calculation method for fibrous braidsAnnex B (informative) Insulated co
24、nductor identificationAnnex C (informative) French and Spanish translations of caution markingsMARCH 14, 2014 NMX-J-436-ANCE-2014 CSA C22.2 NO. 4914 UL 62 3PREFACEThis is the harmonized ANCE, CSA Group, and UL standard for flexible cords and cables. It is the fifthedition of NMX-J-436-ANCE, the four
25、teenth edition of CSA-C22.2 No. 49, and the nineteenth edition ofUL 62. This edition of CSA C22.2 No. 49 supersedes the previous edition(s) published in 2010, 2006,1998, 1992, 1989, 1988, 1981, 1973, 1962, 1960, 1956, 1941, and 1937. This edition of UL 62supersedes the previous edition published in
26、2010.This harmonized standard was prepared by the Association of Standardization and Certification (ANCE),CSA Group, and Underwriters Laboratories Inc. (UL). The efforts and support of the TechnicalHarmonization Subcommittee, Flex Cords, THSC 20, of the Council on the Harmonization ofElectrotechnica
27、l Standards of the Nations of the Americas (CANENA) are gratefully acknowledged.This standard is considered suitable for use for conformity assessment within the stated scope of thestandard.The present Mexican standard was developed by the CT 20 Conductores from the Comite deNormalizacion de la Asoc
28、iacion de Normalizacion y Certificacion, A.C., CONANCE, with the collaborationof the wire and cables manufacturers and users.This standard was reviewed by the CSA Integrated Committee on Flexible Cords/Equipment andAppliance Wires and Cables, under the jurisdiction of the CSA Technical Committee on
29、Wiring Productsand the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formallyapproved by the CSA Technical Committee.This standard has been approved by the American National Standards Institute (ANSI) as an AmericanNational Standard.Application of StandardWhere
30、 reference is made to a specific number of samples to be tested, the specified number is to beconsidered a minimum quantity.Note: Although the intended primary application of this standard is stated in its scope, it is important to note thatit remains the responsibility of the users of the standard
31、to judge its suitability for their particular purpose.Level of HarmonizationThis standard uses the IEC format but is not based on, nor is it to be considered equivalent to, an IECstandard. This standard is published as an equivalent standard for ANCE, CSA Group, and UL.An equivalent standard is a st
32、andard that is substantially the same in technical content, except as follows:Technical national differences are allowed for codes and governmental regulations as well as thoserecognized as being in accordance with NAFTA Article 905, for example, because of fundamental climatic,geographical, technol
33、ogical, or infrastructural factors, scientific justification, or the level of protection thatthe country considers appropriate. Presentation is word for word except for editorial changes.MARCH 14, 2014NMX-J-436-ANCE-2014 CSA C22.2 NO. 4914 UL 624Reasons for Differences From IECThis standard provides
34、 requirements for insulated cords and cables in accordance with the codes ofCanada, Mexico, and the United States. At present there is no IEC standard for cords and cables for usein accordance with these codes. Therefore, this standard does not employ any IEC standard for baserequirements.Interpreta
35、tionsThe interpretation by the standards development organization of an identical or equivalent standard isbased on the literal text to determine compliance with the standard in accordance with the proceduralrules of the standards development organization. If more than one interpretation of the lite
36、ral text has beenidentified, a revision is to be proposed as soon as possible to each of the standards developmentorganizations to more accurately reflect the intent.ANCE Effective DateThe effective date for ANCE will be announced through the Diario Oficial de Ia Federacin (OfficialGazette) and is i
37、ndicated on the cover page.CSA Group Effective DateThe effective date for CSA Group will be announced through CSA Informs or CSA Group CertificationNotice.UL Effective DateAs of March 14, 2016, all products Listed or Recognized by UL must comply with the requirements in thisstandard.Between March 14
38、, 2014, and March 14, 2016, new product submittals to UL may be evaluated under allrequirements in this standard or, if requested in writing, evaluated under presently effective requirementsonly.A UL effective date is one established by Underwriters Laboratories Inc. and is not part of the ANSIappro
39、ved standard.MARCH 14, 2014 NMX-J-436-ANCE-2014 CSA C22.2 NO. 4914 UL 62 51 Scope1.1 GeneralThis standard specifies the requirements for flexible cords, elevator cables, electric vehicle cables, electricvehicle cables, and hoistway cables rated 600 V maximum and intended for use in accordance with C
40、SAC22.1, Canadian Electrical Code (CEC), Part I and CAN/CSA-C22.2 No. 0, General Requirements Canadian Electrical Code, Part II, in Canada, NOM-001-SEDE, La Norma de Instalaciones Electricas(Mexican Electrical Code MEC), in Mexico, and NFPA 70, National Electrical Code (NEC), in the UnitedStates.1.2
41、 Products includedThis standard covers the following products:a) Service cords;b) Elevator cables;c) Hoistway cables;d) Heater cords;e) Range and dryer cords;f) Cords for decorative lighting;g) Tinsel and lamp cords;h) Special use cords; andi) Electric vehicle cables.1.3 National differencesIn cases
42、 where product types are not approved in all three countries, a national difference is indicated bysuperscripts, as shown below:MARCH 14, 2014NMX-J-436-ANCE-2014 CSA C22.2 NO. 4914 UL 626Superscript letter National differencec For use in Canada onlym For use in Mexico onlyu For use in United States
43、onlyc,m For use in Canada and Mexico onlyc,u For use in Canada and United Statesonlym,u For use in Mexico and United Statesonly2 Reference publicationsFor undated references to standards, such reference shall be considered to refer to the latest edition andall revisions to that edition and all revis
44、ions up to the time when this standard was approved. For datedreferences to standards, such reference shall be considered to refer to the dated edition and all revisionspublished to that edition up to the time the standard was approved.ANCE (Association of Standardization and Certification)NMX-J-008
45、-ANCEWires and Cables Tinned Soft or Annealed Copper Wire for Electrical Purposes SpecificationsNMX-J-036-ANCEWires and Cables Soft or Annealed Copper Wire for Electrical Purposes SpecificationsNMX-J-040-ANCEWires and Cables Determination of the Moisture Absorption in Insulations of Electrical Condu
46、ctors Test MethodNMX-J-066-ANCEWires and Cables Determination of the Diameter of Electrical Conductors Test MethodNMX-J-177-ANCEWires and Cables Determination of the Thicknesses in Semiconducting Shields, Insulations and Jacketsof Electrical Conductors Test MethodNMX-J-178-ANCEWires and Cables Ultim
47、ate Strength and Elongation of Insulation, Semiconducting Shields and Jacketsof Electrical Conductors Test MethodNMX-J-190-ANCEWires and Cables Thermal Shock Resistance of PVC Insulations and Protective Coverings of ElectricalConductors Test MethodNMX-J-191-ANCEWire and Cables Heat Distortion of Ins
48、ulations And Protective Coverings of Electrical Conductors TestMethodNMX-J-192-ANCEWires and Cables Flame Test on Electrical Cables Test MethodsMARCH 14, 2014 NMX-J-436-ANCE-2014 CSA C22.2 NO. 4914 UL 62 7NMX-J-193-ANCEWires and Cables Cold Bend of Insulation and Non Metallic Protective Jackets Used on Insulated Wireand Cable Test MethodNMX-J-205-ANCEWires and Cables Determination of Dissipation Factor, Ionization Factor, on Insulated ElectricalConductors Test MethodsNMX-J-212-ANCEWires and Cables Electrical Resistance, Resistivity and Conductivity Test MethodNMX-J-293-
