1、INTERNATIONAL STANDARD ISO/IEC 781 6-6 First edition AMENDMENT 1 1996-05-1 5 2000-06-1 5 Identification cards - Integrated ci rcu i t(s) cards with contacts - Part 6: Interindustry data elements AMENDMENT 1 : IC manufacturer registration Cartes didenfificafion - Cartes circuif(s) infgr(s) confacfs -
2、 Partie 6: lmenfs de donnes infersecforiels AMENDEMENT 1: Enregisfremenf des fabricanfs de circuifs infgrs Adopted by INCITS (InterNational Committee for Information Technology Standards) as an American National Standard. Date of ANSI Approval: 11/1/00 Published by American National Standards Instit
3、ute, 25 West 43rd Street, New York, New York 10036 Copyright 2002 by Information Technology Industry Council (ITI). All rights reserved. These materials are subject to copyright claims of International Standardization Organization (ISO), International Electrotechnical Commission (IEC), American Nati
4、onal Standards Institute (ANSI), and Information Technology Industry Council (ITI). Not for resale. No part of this publication may be reproduced in any form, including an electronic retrieval system, without the prior written permission of ITI. All requests pertaining to this standard should be sub
5、mitted to ITI, 1250 Eye Street NW, Washington, DC 20005. Printed in the United States of America Reference number ISO/IEC 781 6-6:1996/Amd.l:2000(E) ISO/IEC 2000 ISO/IEC 781 6-6:1996/Amd.l:2000(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy
6、, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The IS0 Central Se
7、cretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to e
8、nsure that the file is suitable for use by IS0 member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. O ISOAEC 2000 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced o
9、r utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IS0 at the address below or ISOs member body in the country of the requester. IS0 copyright office Case postale 56 CH-I211 Geneva 20 Tel. + 41 22 749 O1 1
10、1 Fax +41227490947 E-mail copyrightiso.ch Web www.iso.ch Printed in Switzerland II O ISOAEC 2000 -All rights reserved ISO/IEC 7816-6:1996/Amd.l:2000(E) Foreword IS0 (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized syste
11、m for worldwide standardization. National bodies that are members of IS0 or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. IS0 and IEC technical committees col
12、laborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with IS0 and IEC, also take part in the work. International Standards are drafted in accordance with the rules given in the ISOAEC Directives, Part 3 In the field of information te
13、chnology, IS0 and IEC have established a joint technical committee, ISOAEC JTC 1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies ca
14、sting a vote. Attention is drawn to the possibility that some of the elements of this Amendment may be the subject of patent rights. IS0 and IEC shall not be held responsible for identifying any or all such patent rights. Amendment 1 to International Standard ISOAEC 781 6-6:1996 was prepared by Join
15、t Technical Committee ISOAEC JTC 1, Informafion fechnology, Subcommittee SC 17, ldenfificafion cards and relafed devices. O ISOAEC 2000 -All rights reserved . 111 ISO/IEC 7816-6:1996/Amd.l:2000(E) Hexadecimal Value ?00? Identification cards - Integrated circuit(s) cards with contacts - Use RFU Part
16、6: Interindustry data elements ?01? - ?7E? ?7F? AMENDMENT 1 : IC manufacturer registration See assignment and registration procedure in 6.10.3 and currently registered identifiers in 6.10.4, Table 9 RFU Page 4, subclause 4.4 In last line, change ?table 8? to ?table IO? Page 8, after subclause 6.9 IF
17、F? Add the following text as new subclause 6.10: Reserved for future extension 6.1 O IC manufacturer registration 6.10.1 Scope This subclause specifies: - the numbering system, - the rules for assignment, and - the assigned values to identify manufacturers of integrated circuits used in contact and/
18、or contactless integrated circuits cards. 6.10.2 Numbering system The structure and coding of the IC manufacturer identifier is one byte binary with a reserved value for future extension (?FF? reserved for future extension) This byte shall be used according to Table 8: Table 8 - Coding of IC manufac
19、turer identifiers data element I ?80? I RFU I I ?81?- ?FE? I Proprietary I O ISOAEC 2000 -All rights reserved 1 ISO/IEC 781 6-6:1996/Amd.l:2000(E) 6.10.3 Assignment of IC manufacturer identifiers The IC manufacturer identifiers (range 01 - 7E) are assigned and registered by the ISO/IEC JTC 1/SC 17 S
20、ecretariat according to the following rules: - the assignment is made upon request by an IC manufacturer or any interested party; - a single number will be assigned to each manufacturer (next available number); - a copy of the register shall be made available upon request to the ISO/IEC JTC 1/SC 17
21、secretariat. 6.10.4 Register of IC manufacturer identifiers The data object IC manufacturer identifier has the tag 5F4B. The assigned values for the related data element are shown in Table 9. Table 9 - Registered IC manufacturers IC manufacturer identifier O1 02 03 Company Motorola S T Microelectron
22、ics Hitachi, Ltd Add ress Address: MOS Memory & Microprocessor Division Colvilles Rd Kelvin Industrial Estate East Kilbride Glasgow G75 OTG Country: United Kingdom Telephone: +44 135 556 5731 Fax: +4413552564582 Address: IC Card Division 7, Ave Gallini BP 93 94253 GENTILLY Cdx Country: France Teleph
23、one: +33 1 4740 7575 Fax: +33147407910 Address: Semiconductor & Integrated Circuits Group 20-1, Jousuihon-Cho 5 chome Kodaira-shi Tokyo 187-8588 Country Japan Telephone: +81 42 320 7301 (ext 3313) Fax: +81 42 327 8693 Mrs F. Bennett, APACS, Mercury House, Triton Court, 14 Finsbury Square, London EC2
24、 ILQ, UK - email: fjbapacs,org.uk 2 O ISOAEC 2000 -All rights reserved ISO/IEC 7816-6:1996/Amd.l:2000(E) IC manufacturer identifier 04 05 06 07 08 09 OA Table 9 - Registered IC manufacturers (confinue) Company Phi lips Semiconductors Infineon Technologies AG Cylinc Texas Instrument Fujitsu Limited M
25、atsushita Electronics Corporation NEC Address Address: Productgroup Identification Stresemannallee 1 O1 D- 22529 Hamburg Country: Germany Telephone: +49 40 561 3 2995 Fax: +494056133554 Address: Security & Chip Card ICs P.O. Box 80 O9 49 D 81609 Mnchen Country: Germany Telephone: +49 89 234-24145 Fa
26、x: +49 89 234-28925 Address: Sunnivale, CA Country: USA Address: Smart Card Division BP 5 06271 Villeneuve Loubet Cdx Country: France Telephone: +33 4 9322 2220 Fax: :+334 9322 2637 Address: 1-1, Kamikodanaka 4-Chome na ka hara- ku Kawasaki 21 1-8588 Country: Japan Telephone: +81 44 754 3767 Fax: +8
27、1 44 754 3343 Address: 1-1 Saiwai-Cho Takasuki Osaka 569-1 193 Country: Japan Telephone: +81 726 82 7530 Fax: +81 726 82 7093 Address: 1-10 Nisshin-Cho Fch-Shi Tokyo 183 Country: Japan Telephone: :+81 423 33 1498 Fax: +81423331856 O ISOAEC 2000 -All rights reserved 3 ISO/IEC 781 6-6:1996/Amd.l:2000(
28、E) IC manufacturer identifier OB OC OD OE OF 1 O 1 1 to 7E Table 9 - Registered IC manufacturers (confinue) Company Oki Electric Industry Co. Ltd Toshiba Corp. Mitsubishi Electric Corp. Samsung Electronics Co. Ltd Hyundai Electronics Industries Co. Ltd LG-Semiconductors Co. Ltd For future assignment
29、 Add ress Address: LSI Division 550-1 Higashiasakawa-Cho Hachioji-shi Tokyo 193-8550 Country: Japan Telephone: :+81 426 63 1111 Fax: +81426656536 Address: 1-1, Shibaura l-Chome Minato-Ku Tokyo 105-8001 Country: Japan Telephone: :+81 3 3457 8412 Fax: +81 3 5444 9218 Address: Smart Card LSI Division S
30、an 24 Nongseo-Ri Kiheu ng-Eup Yongin-City Kyungki-Do Country: Korea Telephone: :+82 331 209 3437 Fax: :+82 331 209 6533 Address: San 136-1 Ami-ri, Bu bal-eu b Ichon-si Kyu ng ki-do Country: Korea 467-701 Telephone: +82 336 30 2016 Fax: +82336302022 Address: 106 138 Bdg. Sinlim-Dong Gwa na k- Ku Seou
31、l Country: Korea 151-742 Telephone: +82 2 883 5009 Fax: +82 2 882 0470 NOTE - This data element may be present in the data object, tag 46 (pre-issuing data), on a proprietary basis. 4 O ISOAEC 2000 -All rights reserved ISO/IEC 7816-6:1996/Amd.l:2000(E) 5F4B Page 9, subclause 8.1 Change “Table 8“ to
32、“Table IO“ Page 9, Table 8 Change number of Table 8 to Table IO. IC manufacturer identifier To identify manufacturers of integrated circuits 1 byte Add new line to the table, after 5D Headerlist: Page 12, subclause 8.2 Change “Table 9“ to “Table 11“ Page 12, Table 9 Change number of Table 9 to Table 11. Add new line to the table, after 5F4A Public key of certification authority: I 5F4B I IC manufacturer identifier I O ISOAEC 2000 -All rights reserved 5 ISO/IEC 781 6-6:1996/Amd.l:2000(E) ICs 35.240.1 5 Price based on 5 pages O ISOAEC 2000 -All rights reserved
