1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 248-6 Low-Voltage Fuses Part 6: Class H Non-Renewable FusesUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL N
2、OT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Low-Voltage Fuses Part 6: Class H Non-Renewable Fuses, UL 248-6 Second Edition, Dated August 1, 2000 Summary of Topics This revision of ANSI/UL 248-6 is being issued to reaffirm approval as a
3、n American National Standard. No changes in requirements are involved. As noted in the Commitment for Amendments statement located on the back side of the title page, UL, CSA, and ANCE are committed to updating this harmonized standard jointly. However, the revision pages dated January 5, 2015 will
4、not be jointly issued by UL, CSA, and ANCE as these revision pages only address UL ANSI approval dates. Text that has been changed in any manner or impacted by ULs electronic publishing system is marked with a vertical line in the margin. All rights reserved. No part of this publication may be repro
5、duced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the impl
6、ied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard
7、, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to
8、defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. The requiremen
9、ts in this Standard are now in effect, except for those paragraphs, sections, tables, gures, and/or other elements of the Standard having future effective dates as indicated in the preface. The prior text for requirements that have been revised and that have a future effective date are located after
10、 the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. JANUARY 5, 2015 UL 248-6 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JANUARY 5, 2015 UL 248-6 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURT
11、HER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Low-Voltage Fuses Part 6: Class H Non-Renewable Fuses August 1, 2000 (Title Page Reprinted: January 5, 2015) Canadian Standards Association CAN/CSA-C22.2 No. 248.6-00 Second Edition Approved by Underwriters Laboratories Inc. UL 248-6 Second
12、 Edition ANSI/UL 248-6-2005 (R2015) National Association of Standardization and Certication of the Electrical Sector NMX-J-009/248/6-2000-ANCE First EditionUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Commitment for Amendments This standa
13、rd is issued jointly by the Association of Standardization and Certication (ANCE), the Canadian Standards Association (operating as “CSA Group”), and Underwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standard may be submitted to ANCE, CSA Group, or UL at any
14、time. Revisions to this standard will be made only after processing according to the standards development procedures of ANCE, CSA Group, and UL. CSA Group and UL will issue revisions to this standard by means of a new edition or revised or additional pages bearing their date of issue. ANCE will inc
15、orporate the same revisions into a new edition of the standard bearing the same date of issue as the CSA Group and UL pages. Copyright 2005 ANCE Rights reserved in favor of ANCE ISBN 1-55324-236-X Copyright 2000 CSA Group All rights reserved. No part of this publication may be reproduced in any form
16、 whatsoever without the prior permission of the publisher. Copyright 2015 Underwriters Laboratories Inc.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface .4 1 General 9 1.1 Scope .9 4 Classication .9 5 Characteristics 9 5.2 Vo
17、ltage rating 9 5.3 Current rating 9 5.5 Interrupting rating 10 6 Marking .10 6.1 Marking of fuses 10 7 Construction .10 7.1 Dimensions .10 8 Tests .13 8.1 Fuses for operation test 13 8.2 Verication of temperature rise and current-carrying capacity .13 8.3 Verication of overload operation 14 8.4 Veri
18、cation of operation at rated voltage .14 9 Special Tests 14 9.1 General 14 9.2 Verication of low melting point P ( D for time delay) characteristic .15 AUGUST 11, 2005 NMX-J-009/248/6-2000-ANCE CAN/CSA-C22.2 NO. 248.6-00 UL 248-6 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DI
19、STRIBUTION WITHOUT PERMISSION FROM UL Preface This is the common UL, CSA, and ANCE Standard for Low-Voltage Fuses Part 6: Class H Non-Renewable Fuses. This is the second edition of CAN/CSA-C22.2 No. 248.6-00 (superseding the rst edition, published in 1996), the second edition of UL 248-6, and the rs
20、t edition of NMX-J-009/248/6-2000-ANCE. This Standard was prepared by a Technical Harmonization Committee comprised of members from Underwriters Laboratories, CSA International, the National Association of Standardization and Certication of the Electrical Sector, the end product manufacturers, and m
21、aterial suppliers. The efforts and support of the members of the Technical Harmonization Committee are gratefully acknowledged. The present Mexican Standard was developed by the TC 32 Fuses from the Comite de Normalizacion de la Asociacion de Normalizacion y Certicacion, A.C., CONANCE, with the coll
22、aboration of the fuse manufacturers and users. This Standard was reviewed by the CSA Subcommittee on Fuses and approved by the Technical Committee on Industrial Products under the jurisdiction of the CSA Strategic Steering Committee on the Requirements for Electrical Safety. This Standard has been a
23、pproved by the American National Standards Institute (ANSI) as an American National Standard. This ANSI/UL Standard for Safety consists of the Second Edition including revisions through January 5, 2015. The most recent designation of ANSI/UL 248-6 as a Reaffirmed American National Standard (ANS) occ
24、urred on January 5, 2015. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page (front and back), or the Preface. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Req
25、uest in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. To purchase UL Standards, visit Comm 2000 at http:/m- or call toll-free 1-888-853-3503. Note: Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains th
26、e responsibility of the users of the Standard to judge its suitability for their particular purpose. Level of Harmonization This trinational standard is published as an Identical Standard. An identical standard is a standard that is the same in technical content except for conicts in Codes and Gover
27、nmental Regulations. Presentation is word for word except for editorial changes. Interpretations The interpretation by the SDO (Standards Development Organization) of an identical standard shall be based on the literal text to determine compliance with the standard in accordance with the procedural
28、rules of the SDO. If more than one interpretation of the literal text has been identied, a revision shall be proposed as soon as possible to each of the SDOs to more accurately reect the intent. JANUARY 5, 2015 NMX-J-009/248/6-2000-ANCE CAN/CSA-C22.2 NO. 248.6-00 UL 248-6 4UL COPYRIGHTED MATERIAL NO
29、T AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL ANCE Effective Date The effective date for ANCE will be announced through the Diario Ocial de la Federation (Official Gazette) and is indicated on the cover page. AUGUST 2, 2010 NMX-J-009/248/6-2000-ANCE CAN/CSA-C22.2 N
30、O. 248.6-00 UL 248-6 4AUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL AUGUST 2, 2010 NMX-J-009/248/6-2000-ANCE CAN/CSA-C22.2 NO. 248.6-00 UL 248-6 4B No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DIS
31、TRIBUTION WITHOUT PERMISSION FROM UL CSA Effective Date The effective date for CSA will be announced through CSA Informs or CSA Certication Notice. UL Effective Date This edition of the standard is now in effect. AUGUST 11, 2005 NMX-J-009/248/6-2000-ANCE CAN/CSA-C22.2 NO. 248.6-00 UL 248-6 5UL COPYR
32、IGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL This page intentionally left blank. AUGUST 11, 2005 NMX-J-009/248/6-2000-ANCE CAN/CSA-C22.2 NO. 248.6-00 UL 248-6 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOU
33、T PERMISSION FROM UL This page intentionally left blank. AUGUST 11, 2005 NMX-J-009/248/6-2000-ANCE CAN/CSA-C22.2 NO. 248.6-00 UL 248-6 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL This page intentionally left blank. AUGUST 11, 2005 NMX-J
34、-009/248/6-2000-ANCE CAN/CSA-C22.2 NO. 248.6-00 UL 248-6 8UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Low-Voltage Fuses Part 6: Class H Non-Renewable Fuses 1 General NOTE This Part is intended to be read together with the Standard for Lo
35、w-Voltage Fuses Part 1: General Requirements, hereafter referred to as Part 1. The numbering of the Clauses in this Part correspond to like numbered Clauses in Part 1. The requirements of Part 1 apply unless modied by this Part. For Clauses not shown below, refer to the Standard for Low-Voltage Fuse
36、s Part 1: General Requirements, NMX-J-009/248/6-2000-ANCE CAN/CSA C22.2 No. 248.1 UL 248-1. 1.1 Scope This Part applies to Class H Non-Renewable fuses rated 600 A or less and either 250 or 600 V ac. DC ratings are optional. 4 Classication Class H Non-Renewable fuses have an interrupting rating of 10
37、,000 A. Both of the voltage ratings 250 V ac and 600 V ac are divided into six body sizes with the maximum current rating in each size as specied in this Part. These fuses are not classied as current limiting. Time-delay ratings are optional. In Canada, 250 V ac fuses rated 15 60 A shall have a low
38、melting point P ( D for time delay) characteristic. See Clauses 6.1 and 9.2. 5 Characteristics 5.2 Voltage rating For AC, the rating shall be 250 V ac or 600 V ac in accordance with dimensions shown in Figures A and B. The DC voltage rating may be different from the AC rating. 5.3 Current rating Ref
39、er to Figures A and B for range of current ratings in each body size for each voltage rating. AUGUST 11, 2005 NMX-J-009/248/6-2000-ANCE CAN/CSA-C22.2 NO. 248.6-00 UL 248-6 9UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 5.5 Interrupting rat
40、ing For AC 10,000 A For DC 10,000 A 6 Marking 6.1 Marking of fuses In addition to the requirements in Part 1: Fuses with a low melting point characteristic, for Canada, shall be marked with a P or with a D for time delay. g) The fuse shall not be marked Current Limiting. 7 Construction 7.1 Dimension
41、s Fuse dimensions are shown in Figures A and B. This is generated text for gtxt. AUGUST 1, 2000 NMX-J-009/248/6-2000-ANCE CSA C22.2 NO. 248.6-00 UL 248-6 10UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL This is generated text for gtxt. Figu
42、re A Dimensions of ferrule type Class H Non-Renewable fuses in mm (in) Rating Overall length of fuse Minimum length of ferrule Outside diameter of ferrule Volts Current I n ,A A a BC b 250 0 30 50.8 12.7 14.3 (2.00) (0.50) (0.56) 31 60 76.2 15.9 20.6 (3.00) (0.62) (0.81) 600 0 30 127.0 12.7 20.6 (5.
43、00) (0.50) (0.81) 31 60 139.7 15.9 27.0 (5.50) (0.62) (1.06) a Tolerance: 0.79 mm ( 0.031 in). b Tolerance: 0.20 mm ( 0.008 in). AUGUST 1, 2000 NMX-J-009/248/6-2000-ANCE CSA C22.2 NO. 248.6-00 UL 248-6 11UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSI
44、ON FROM UL Figure B Dimensions of knife blade type Class H Non-Renewable fuses in mm (in) Rating Overall length of fuse Minimum length of blade Minimum overall length of cylindrical body Minimum distance from mid- point of fuse to nearest live part Thickness of blade Width of blade Maximum dimension
45、 of cap including projections Volts Current I n ,A A a B b C c D d E e F f G 250 61 100 149.2 25.4 85.7 26.2 3.18 19.05 19.1 (5.88) (1.00) (3.38) (1.03) (0.125) (0.750) (0.75) 101 200 181.0 34.9 104.8 30.2 4.76 28.58 25.4 (7.12) (1.38) (4.12) (1.19) (0.188) (1.125) (1.00) 201 400 219.1 47.6 117.5 30
46、.2 6.35 41.28 31.8 (8.62) (1.88) (4.62) (1.19) (0.250) (1.625) (1.25) 401 600 263.5 57.2 131.8 38.9 6.35 50.80 38.1 (10.38) (2.25) (5.19) (1.53) (0.250) (2.000) (1.50) 600 61 100 200.0 25.4 136.5 44.4 3.18 19.05 22.2 (7.87) (1.00) (5.38) (1.75) (0.125) (0.750) (0.87) 101 200 244.5 34.9 155.5 57.2 4.
47、76 28.58 28.6 (9.62) (1.38) (6.12) (2.25) (0.188) (1.125) (1.13) 201 400 295.3 47.6 181.0 63.5 6.35 41.28 38.1 (11.62) (1.88) (7.12) (2.50) (0.250) (1.625) (1.50) 401 600 339.7 57.2 208.0 68.3 6.35 50.80 44.5 (13.38) (2.25) (8.18) (2.69) (0.250) (2.000) (1.75) a Tolerances: 61 200 A, 1.57 mm ( 0.062
48、 in); 201 600 A, 2.39 mm ( 0.094 in). b One blade shall not be more than 1.57 mm (0.062 in) longer than the other blade. The effective length of the blade is measured from the blade end to the fuse body or other acceptable interference means in the blade, such as pins through the blades, a collar, o
49、r the like. c The length of the cylindrical body may be less than the indicated value if other acceptable interference means such as pins through the blades or collars are provided to prevent mounting the fuse in a fuseholder that will accommodate a fuse rated in the next lower bracket of current ratings. d The minimum distance f
