1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 365 Police Station Connected Burglar Alarm Units and SystemsUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL
2、NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Police Station Connected Burglar Alarm Units and Systems, UL 365 Fourth Edition, Dated July 31, 1997 Summary of Topics The revisions were issued to incorporate the following changes: 1. Revi
3、sion to minimum spacing requirements. 2. Revision of minimum wire size requirements for eld wiring terminals and modication of the requirements for eld wiring leads. 3. Revisions to attack and tamper resistant alarm sounding device requirements. The revised requirements are substantially in accordan
4、ce with Proposal(s) on this subject dated October 7, 2011 and March 22, 2013. Text that has been changed in any manner or impacted by ULs electronic publishing system is marked with a vertical line in the margin. Changes in requirements are marked with a vertical line in the margin and are followed
5、by an effective date note indicating the date of publication or the date on which the changed requirement becomes effective. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying,
6、 recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, inciden
7、tal, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event sh
8、all ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment
9、(including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. The following table lists the future effective dates with the corresponding reference. MARCH 20, 2015 UL 365 tr1UL COPYRIGHTED M
10、ATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Future Effective Date Reference March 20, 2018 Table 23.1 MARCH 20, 2015 UL 365 tr2UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JULY 31, 1997 (Titl
11、e Page Reprinted: March 20, 2015) 1 UL 365 Standard for Police Station Connected Burglar Alarm Units and Systems First Edition March, 1975 Second Edition July, 1982 Third Edition June, 1993 Fourth Edition July 31, 1997 This ANSI/UL Standard for Safety consists of the Fourth Edition including revisio
12、ns through March 20, 2015. The most recent designation of ANSI/UL 365 as an American National Standard (ANSI) occurred on March 20, 2015. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page, or effective date information. Comments or proposals for revisions on
13、 any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be
14、 altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2015 UNDERWRITERS LABORATORIES INC. ANSI/UL 365-2015UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBU
15、TION WITHOUT PERMISSION FROM UL MARCH 20, 2015 POLICE STATION CONNECTED BURGLAR ALARM UNITS AND SYSTEMS - UL 365 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS INTRODUCTION 1 Scope .9 2 General .10 2.1 Termino
16、logy 10 2.2 Components 10 2.3 Units of measurement 10A 2.4 Undated references 10A 3 Glossary .10A 4 Installation and Operating Instructions 12 4A Installation and Operating Instructions Physical Media 12 CONSTRUCTION ASSEMBLY 5 General .12A 5.1 Product assembly .13 5.2 Electrical protection 13 6 Pro
17、tection of Service Personnel .16 7 Enclosures 17 7.1 General 17 7.2 Doors and covers .17 7.3 Enclosure openings 19 7.4 Screens and expanded metal .20 7.5 Cast metal 21 7.6 Sheet metal 22 7.7 Product enclosure mounting 22 7.8 Polymeric materials 24 8 Electric Shock .24 9 Corrosion Protection .26 FIEL
18、D WIRING CONNECTIONS 10 General 27 11 Cord-Connected Products .27 12 Permanently-Connected Products .27 12.1 General .27 12.2 Field-wiring terminals .28 12.3 Field wiring leads .30A 12.4 Polarity identication 30A 13 Grounding 30B INTERNAL WIRING 14 General 31 15 Wiring Methods .33 16 Separation of C
19、ircuits .33 17 Bonding for Grounding 34 MARCH 20, 2015 POLICE STATION CONNECTED BURGLAR ALARM UNITS AND SYSTEMS - UL 365 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL COMPONENTS, ELECTRICAL 18 General 37 18.1 Mounting of components 37 18.
20、2 Insulating materials .37 18.3 Fuseholders .38 18.4 Current-carrying parts .38 18.5 Power-on indicator .39 19 Overcurrent Protection 39 20 Semiconductors 39 21 Switches .39 22 Transformers and Coils 39 SPACINGS 23 General 39 24 Components .42 PERFORMANCE ALL UNITS 25 General 42 25.1 Test units and
21、data .42 25.2 Test samples and miscellaneous data 42 25.3 Test voltages 42 25.4 FCC requirements 42A 26 Normal Operation Test .42A 27 Current Protection Test 43 28 Input Test 43 29 Output Measurement Test .43 30 Electrical Supervision Test .44 31 Undervoltage Operation Test .44 32 Overvoltage Operat
22、ion Test 45 33 Variable Ambient Test .45 34 Humidity Test 45 35 Leakage Current Tests for Cord-Connected Products .45 36 Electric Shock Current Test .48A 37 Overload Test 52 37.1 General .52 37.2 Separately energized circuits 52 38 Endurance Test 53 38.1 General .53 38.2 Separately energized circuit
23、s 53 39 Jarring Test 53 40 Dielectric Voltage-Withstand Test .54 41 Temperature Test .55 42 Abnormal Operation Test 58 43 Electrical Transient Tests 59 43.1 General .59 43.2 Supply line transients .59 43.3 Internally induced transients .61 43.4 Input/output circuit transients 61 44 AC Induction Test
24、 .62 45 Polymeric Materials Test .62 MARCH 8, 2005 POLICE STATION CONNECTED BURGLAR ALARM UNITS AND SYSTEMS - UL 365 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 46 Battery Replacement Test 62A 47 Drop Test 63 48 Strain Relief Test .63 4
25、8.1 Supply cord .63 48.2 Field-wiring leads .63 49 Ignition Through Bottom-Panel Openings Test 63 49.1 General .63 49.2 Hot, aming oil .63 49.3 Molten PVC and copper .64 50 Mechanical Strength Tests for Enclosures .64 51 Special Terminal Assemblies Tests .65 51.1 General .65 51.2 Disconnection and r
26、econnection .65 51.3 Flexing test 65 51.4 Millivolt drop test .66 51.5 Temperature test .66 POLICE STATION RECEIVING AND TRANSMITTING UNITS 52 General 66 53 Common Requirements .66 54 Direct-Connected Units 67 55 Transmitter-Connected Units .67 56 Other Methods of Alarm Transmission .68 57 Basic Lin
27、e Security .69 58 Intermediate Line Security .69 59 Standard Line Security Equipment 69 59A Encrypted Line Security Equipment 71 PROTECTED PREMISES EQUIPMENT 60 Subscribers Control Units .71 61 Outside Alarm Devices 72 62 Intrusion Detection 72 MERCANTILE PREMISES ALARM SYSTEMS GENERAL 63 Constructi
28、on .72 64 Circuit and Operation 72A 65 Maintenance .73 66 Attack Tests 74 66.1 General .74 66.2 Test method .74 67 Attack Resistance Time .75 68 Tamper Protection 76 68A Alarm Sounding Devices .77 LINE SECURITY 69 General 78 MARCH 8, 2005 POLICE STATION CONNECTED BURGLAR ALARM UNITS AND SYSTEMS - UL
29、 365 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MERCANTILE SAFE AND VAULT ALARM SYSTEMS DETAILS 70 General 78 71 Circuit and Operation 78 GRADE AA REQUIREMENTS DELETED 72 General 78A BANK SAFE AND VAULT ALARM SYSTEMS POLICE STATION CON
30、NECTED BANK SAFE AND VAULT BURGLAR ALARM UNITS 73 General 78A 74 Circuit and Operation 78A 75 Maintenance .79 76 Attack Test .80 ALARM SYSTEMS FOR BANK SAFES AND VAULTS 77 General 80A 78 Tamper Protection .80A 78A Alarm Sounding Devices .80B 79 Circuit and Operation 80B GRADE B REQUIREMENTS DELETED
31、80 General 80B 81 Tamper Protection .80B 82 Circuit and Operation 81 LINE SECURITY EQUIPMENT 83 General 82A POWER SUPPLIES DETAILS 84 General 82A RECHARGEABLE (SECONDARY) BATTERIES 85 General 83 NONCHARGEABLE (PRIMARY) BATTERIES 86 General 84 MARCH 20, 2015 POLICE STATION CONNECTED BURGLAR ALARM UNI
32、TS AND SYSTEMS - UL 365 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL PERFORMANCE 87 Power Failure Test 85 88 Power Supply Located at Police Station .86 SHORT RANGE RADIO FREQUENCY (RF) DEVICES 89 General 87 90 Time to Report Alarm .87 91
33、 Inoperative Transmitter Reporting .88 92 Battery Status Indication .88 93 Tamper Protection 89 94 Protection From Interference .89 95 Reference Level Determination .89 95.1 General .89 95.2 Method 1 89 95.3 Method 2 91 96 Interference Immunity .94 97 Frequency Selectivity 95 98 Clash 96 99 Clash Er
34、ror 97 100 Error (Falsing) Rate 97 101 Throughput Rate 99 102 Transmitter Stability Test 100 103 Transmitter Accelerated Aging Test .100 104 Installation Instructions and User Manual 100 MANUFACTURING AND PRODUCTION LINE TESTS FOR HIGH-VOLTAGE PRODUCTS 105 General .100 106 Production Line Dielectric
35、 Voltage-Withstand Test 101 107 Production Line Grounding Continuity Test 101 MARKING 108 General .102 109 Marking Permanency Tests 104 OUTDOOR USE EQUIPMENT ASSEMBLY 110 General .104 111 Construction 104A 111.1 General .104A 111.2 Corrosion protection 105 112 Field-Wiring Connections 107 113 Intern
36、al Wiring .107 114 Components, Electrical Insulating Material .108 MARCH 8, 2005 POLICE STATION CONNECTED BURGLAR ALARM UNITS AND SYSTEMS - UL 365 6AUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL PERFORMANCE 115 Rain Test 108 116 Dust Test
37、110 117 Variable Ambient Test .110 118 Metallic Coating Thickness Test 112 119 Corrosion Tests 113 119.1 General .113 119.2 Salt spray (fog) 114 119.3 Moist hydrogen sulde (H 2 S) air mixture 114 119.4 Moist carbon dioxide (CO 2 ) sulphur dioxide (SO 2 ) air mixture 114 120 Ultraviolet Light and Wat
38、er Exposure Test .114 121 Accelerated Aging Tests for Gaskets, Sealing Compounds, and Adhesives 115 MARKING 122 General .117 ACCESSORY EQUIPMENT 123 General .117 124 Construction .117 125 Performance (Installation) Test .118 126 Markings 118 Appendix A Standards for ComponentsA1 MARCH 8, 2005 POLICE
39、 STATION CONNECTED BURGLAR ALARM UNITS AND SYSTEMS - UL 365 6BUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MARCH 8, 2005 POLICE STATION CONNECTED BURGLAR ALARM UNITS AND SYSTEMS - UL 365 7 No Text on This PageUL COPYRIGHTED MATERIAL NOT A
40、UTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL This page intentionally left blank. MARCH 8, 2005 POLICE STATION CONNECTED BURGLAR ALARM UNITS AND SYSTEMS - UL 365 8UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM U
41、L INTRODUCTION 1 Scope 1.1 These requirements cover construction, performance, and maintenance of police station connected burglar-alarm units and systems for use in mercantile premises, mercantile safes and vaults, and bank safes and vaults. 1.2 As covered by these requirements, a police station co
42、nnected alarm system consists of protective circuits and devices, connected through control apparatus to a sounding device mounted on an outside or inside wall of the building in which the protected property is situated, and a constantly-manned police department (see 1.8 and 52.1). Intrusion into or
43、 disturbance of the units or wiring causes the sounding device to be actuated and a signal to be transmitted to the police department. The sounding device and signal to the police department continue to operate until it is stopped by using the proper control key, by exhaustion of the power supply, o
44、r by action of an automatic timing element that is preset for a denite operating period. These systems usually operate within the limits of Class 2 remote control and signal circuits as dened by Article 725 of the National Electrical Code, NFPA 70. 1.2 revised March 20, 2015 1.3 The operation of a p
45、olice station connected alarm system is partially under the control and domination of the owner or others interested in the property. However, it is required that police station connected systems be maintained under the care and regular inspection service of the installing company. The installing co
46、mpany is expected to respond promptly to troubles or calls for service on report of the owner or police department. See Mercantile Premises Alarm Systems, Maintenance, Section 65 and Bank Safe and Vault Alarm Systems, Maintenance, Section 75. It is the responsibility of the owner to switch the syste
47、m on and off duty and to report malfunctioning of the system to the service company. 1.4 Police station connected mercantile burglar-alarm systems transmission means may be designated as standard line security or encrypted line security and are designated as to their acceptability for use either on
48、mercantile premises or on mercantile safes and vaults. See Standard Line Security Equipment, Section 59, and Encrypted Line Security Equipment, Section 59A. Revised 1.4 effective March 8, 2007 1.5 Police station connected bank burglar-alarm systems transmission means may be designated as standard li
49、ne security or encrypted line security and are for use on bank safes and vaults. See Standard Line Security Equipment, Section 59, and Encrypted Line Security Equipment, Section 59A. Revised 1.5 effective March 8, 2007 1.6 Equipment intended for combination burglar-alarm and re-protective signaling systems is also expected to comply, with the Standard for Control Units for Fire-Protective Signaling Systems, UL 864. 1.7 Devices installed on individual properties are further classied as to extent of protect
