1、i ! I l L- 73-20 A-A-50030A 73 7779774 0037474 3 m - A-A50030A April 15, 1988 SUPERSEDING A-A-50030 August 27, 1982 COMMERCIAL ITEM DESCRIPTION SLICING MACHINE, BUN The General Services Administration has authorized the use of this commercial item description in preference to Military specification
2、MIL-S-43818. 1. SALIENT CHARACTERISTICS. 1.1 Design and construction. The bun slicing machine shall consist of a feeding chute tilted at a 25 to 35 degree vertical angle with the machine base and a circular cutting blade rotated by an electric motor. The motor shall be at least 1/4 horsepower and sh
3、all Se controlled by an on-off switch provided with a safety guard cover located on the body of the bun slicing machine accessible to the operator. The feeding chute shall have adjustments for bun width and height, and thickness and depth of cut. The feeding chute interior width shall be infinitely
4、adjustable from a lower limit of no more than 1-1/4 inches to an upper limit of no less than 5 inches. The feeding chute interior height shall be infinitely adjustable from a lower limit of no more than 1-3/4 inches to an upper limit of no less than 2-3/4 inches. The cutting blade height shall be in
5、finitely adjustable from a lower limit of no more than 1/2 inch above the base of the chute to an upper limit of no less than 15/16 inch above the base of the chute. The bun slicing machine shall be a counter model with 4 non-skid feet, and shall have envelope dimensions no greater than 36 inches wi
6、de, 15 inches deep, and 25 inches high. No tools or excessive force shall be required to make adjustments on the bun slicing machine, and during adjustment there shall be no binding or jamming of moving parts. The bun slicing machine shall be capable of slicing both soft and hard buns and rolls with
7、out jamming or stalling, and without tearing or crushing the buns or rolls. When the machine is switched on, the cutting blade shall rotate such that, within the chute, the cutting edge travels away frcm the bun inlet. The cutting teeth or serrations, as applicable, shall have their cutting edge fac
8、ing the same direction as the blade travels. FSC 7320 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. K . THIS DOCUMENT ClNTAINS 9 PAGES. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50030A 73 W 49999iLi 001i7
9、475 5 W 1.2 Electrical characteristics. The bun slicing machine shall be designed for operation on a nominal 120 volt, 60 hertz, i phase alternating current. 1.3 Standards compliance. The bun slicing machine shall comply with Underwriters Laboratories, Inc. (UL) Standard No. 763 and Baking Industry
10、Sanitation Standards Committe (BISCC) Standard No. 13. 1.4 Data name plate (Government unique requirement (see 4.4). The bun slicing machine shall be furnished with a data name plate in accordance with the applicable requirements of MIL-STD-130 except the requirements for: Methods of applying, (b) I
11、dentification tags, (cl Information not required, and (d) Optional marking information shall not apply. shall be made of minimum 20 gage corrosion-resisting metal, and attached to the bun slicing machine by rivets, screws, or by welding, in such a manner as to meet the applicable National Sanitation
12、 Foundation requirements for this equipment. stamped, engraved, or applied by photosensitive means: (a) The data name plate The plate shall bear the following information which shall be National Stock Number Procurement Contract Number Specification Data Manufacturers Name, Address, and Telephone Nu
13、mber Suppliers Name, Address, and Telephone Number (List only if different from Manufacturers Model Number Government Approved Manual Number (when specified, see 4.2) Manufacturer) Each plate shall be placed so that it is readily visible to the operator during normal operating use and so as to not a
14、dversely affect the life and utility of the bun slicing machine. 2. QUALITY ASSURANCE 2.1 Certification. The contractor shall certify that the product offered meets the salieiit characteristics and requirements of the description and except for those government unique requirements Specified, conform
15、s to the producers own drawings, specifications, standards, and quality assurance practices, aiid is the same as the product offered for sale in the commercial marketplace. The contractor shall certify the product meets the “Government unique“ requirements except when specific quality assurance prov
16、icions are specified for the Government unique requirements. In this case, the contractor shall provide data resulting from inspection conducted in accordance with the specified quality assurance. The Government reserves the right to require proof of such conformance prior to first delivery and ther
17、eafter as may be otherwise provided for under the provisions of the contract 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1 -e - A-A-50030A 73 7777974 0037476 7 A-A-50030A 3. PACKAGING 3.1 Packaging and packing. export, as specified (see 4.2). P
18、ackaging and packing shall be commercial or 3.2 Commercial packaging and packing. cleaned, preserved, packaged, packed, and unitized in accordance with ASTM D 3951. Each bun slicing machine shall be 3.3 Export packaging and packing. 3.3.1 Export packaging. Each bun slicing machine shall be cleaned,
19、preserved, and cushioned to protect against corrosion, deterioration, and physical damage during shipping and storage. 3.3.2 Export packing. and lock-corner wood box conforming to class 2, style optional, type 2 load of PPP-E-621 or a wood-cleated plywood box conforming to overseas type, style optio
20、nal, type 2 load of PPP-B-601. Each box shall be waterproofed with a sealed case liner conforming to type I, II, or IV, grade optional of MIL-L-10547. PPP-E-621 or PPP-E-601, as applicable. 3.4 Marking (commercial and export). containers shall be in accordance with MIL-STD-129 or ASTM D 3951, as app
21、licable. Each bun slicing machine shall be packed in a nailed Each box shall be closed and strapped in accordance with Marking of unit packs and shipping 4. NOTES 4.1 Intended use. The handfed, counter mounted electrically powered bun slicing machines are intended for use in garrison areas to slice
22、rolls and buns. 4.2 Ordering data. Acquisition documents should specify the following: a. Title, number, and date of this document. b. Government approved manual number to be included on the data name plate when manuals are purchased under the contract (see 1.4). c. Selection of applicable packaging
23、 and packing required (see 3.1). 4.3 Sources of documents. 4.3.1 UL Standard No. 763 - Motor Operated Commercial Food Preparing Machines, is available from: Sources of nongovernment association documents. Underwriters Laboratories, Inc. (UL) 333 Pfingsten Road 0 Northbrook, IL 60062 3 Provided by IH
24、SNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50030A 73 979497V 0017477 9 BISCC Standard No. 13 - Bread and Roll Slicers and Wrappers, is available from: Baking Indus try Sanitation Standards Committee (BISCC) 111 East Wacker Drive Sute 600 Chicago, IL 60601
25、 ASTM D 3951 - Standard Practice for Commercial Packaging is available from: The American Society for Testing and Materials (ASTM) 1916 Race Street Philadelphia, PA 19103-1187 NSF Standards are available from: National Sanitation Foundation (NSF) 3475 Plymouth Road P.O. Box 1468 Ann Arbor, MI 48106
26、4.3.2 Sources of governmental documents. Military documents are available from: Naval Publications and Forms Center 5801 Tabor Avenue Philadelphia, PA 19120 4.4 Government unique requirements. Whenever “(Government unique requikement)“ is included in the title of a paragraph under “salient character
27、istics,“ it is meant that the requirement is comething that is not normally offered to the commercial marketplace by the manufacturer. MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: Custodians GSA-FSS Army - GL Navy - SA Air Force - 99 PREPARING ACTIVITY: Army - GL Review Activities Project No. 7320-0825 Army - MD Navy - YD Air Force - 84 DLA - GS User Activity Navy - MC Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
