1、A-A-52105 83 9999974 0061677 6 W A-A-52 105 mv 7, 1991 CCGVIMEEECIAL ITEM DESCRIPTION CKYIH, INIERLINING, OR SY”ETIC WARP, AND SPUN HAIR-WOOL OR RAYON FILLING The General Services Administration has authorized the use of this Ccnnnercial Item Description in preference to Military Specification MIL-C
2、-297. Abstract. spun hair-wool or rayon filling cloth material intended for use as interlining material in various clothing items. This Ccnnnercial Item Description covers cotton or synthetic warp, and . 1. CLASSIFICATION 1.1 Classification. specfied (see 5.1). The cloth material shall be of the fol
3、lowing types as Type I - Light weight Type II - Medium weight Type III - Heavy weight 2. SALIENT (mAREmR1S”rICS 2.1 General description. 100 percent polyester, or any combination of polyester and cotton, or from 45 to 70 percent polyester with the remaining percentage rayon. shall be either a staple
4、 fleece or pulled wool blended with goat-hair and spun on the worsted system into singles, or a blend of goat-hair and rayon spun into The warp yarns shall be either 100 percent cotton, The filling yarns Beneficial ccnnnents, recomnendations, additions, deletions, clarifications, etc., and any other
5、 data which may improve this document should be sent to: Comnander, U.S. Anrry Natick Research, Developrent, and Engineering Center, A”N: EYRNC-Im, mtick, MA 01760-5019. 244% N/A Fsc 8305 DISPRIWION STATEMENI? A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo
6、 reproduction or networking permitted without license from IHS-,-,- - A-A-52105 3 9999974 0061678 8 A-A-52 105 singles yarn. shall be as specified (see 5.1) and shall be the minimum acceptable wAth inclusive of the selvage when fly-shuttle looms or shuttleless loans with tuck-in selvages are used. m
7、de between the last warp yarn on each side excluding the protruding fringe(s). The color of the finished cloth shall be natural or dyed as specified (see 5.1) and shall match the standad sample when viewed under filtered tungsten lamps that approximate artificial daylight and that have a correlated
8、color temperature of 7500 = 200K, with illumination of 100 20 foot candles, and shall be a good match to the standard sample under incandescant lamplight at 2300 200K. The use of dyes and compounds containing elementary sulfur capable of oxidation to sulfuric acid is prohibited. The cloth shall be p
9、lain weave and shall be preshrunk. The width For all other shuttleless looms the width measurement shall be 2.2 Physical requirements. listed in table I. The finished cloth shall conform to the requirements TABLE I. Physical resuirements Characteristic Requirements Type I Type II Type III Test metho
10、d A/ Warp yarn identification: Cotton Synthetic Filling yarn identification: Goat-hair and wool Goat-hair and rayon nima fiber content percent: 2/ Goat-hair and wool filling Goat-hair and rayon filling Colorfastness to: Perspiration Steam pressing Sublimation Wet drycleaning Labile sulfur content We
11、ight, oz./sq. yd. Minimum Maximum Yarns per inch (min) : warp Fi 11 ing - - - - 45 20 Good Good Good Good - 3/ 5.0 7.0 42 34 2 - - - - 45 20 Good Good Good Good - 3/ 7.0 8.0 42 34 - - - - 45 20 Good Good Good Good - 3/ 7.5 9.0 42 34 1200 1600 - - 2 100 2 100 5680 5640 5642 5622 2020 504 1 5041 5050
12、5050 1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-52105 3 9999974 0061679 T W A-A-52105 TABLE I. Physical requirements (contd) Characteristic Requirements Type I Type II Type III Test method i/ Breaking strength, lbs. (min): warp 50 50 50 51
13、00 Filling 45 45 45 5100 Stiffness, A/ load-pounds (min): (filling only) O. 005 o. o11 O. 016 5202 Shrinkage, percent (max) : warp 3.0 3.0 3.0 5558 !5/ Fi 11 ing 2.0 2.0 2.0 5558 !j/ - i/ The test methods indicated, from FED-Dl91 Textile Test EiIethods, have hen found acceptable to determine if the
14、cloth meets the stated requirements. If the Govemnt requires proof that the cloth meets the stated requirements, the test methds indicated shall be used. - 2/ The percent animal fiber content of the finished cloth shall be based on the dry desized weight of the specimen. - 3/ The dyed and finished c
15、loth shall contain no More labile sulfur than sham by standard sample. show not more than a %light1 trace of labile sulfur as defined in the test method. When a standard sample is not available the cloth shall - 4/ Measured parallel with the filling direction. - 5/ Method 5558 shall be used except t
16、hat the specimen shall be dried as specified in Methd 5550. 30 minutes in water containing a minimum amount of a suitable wetting agent to thoroughlywet out the fabric. The cloth shall be kept suhnerged for a period of 2.3 LRnQth and put-up. furnished in continuous lengths each not less than 40 yard
17、s. put-up full width on rolls as specified in 4.1. unless othemise specified (see 5.1), cloth shall be The cloth shall be 3. QUALIITYASSURANCE 3.1 Certification. The contractor shall certify, and maintain substantiating evidence, that the product offered meets the salient characteristics and require
18、ments of this Comercial Item Description, and that the product confom to the producers awn drawings, specifications, standards, and quality assurance practices. conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. The Government re
19、serves the right to require proof of such 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-52105 83 9977974 ClObLb80 b A-A-52 105 3.2 Visual examination. MIL-STD-105. (AQL), expressed in tem of defects per hundred units, shall be 6.5. size shall
20、 be expressed in units of yards. yard. The cloth shall be examined for the follcwing defects: smash, multiple floats, broken or missing end or pick, embedded crease or wrinkle, spots, or stains. Mts of cloth shall be inspected in accordance with The inspection level shall be I and the acceptable qua
21、lity level The lot The sample unit shall be 1 linear hole, cut, tear, 3.3 bnq-th examination. shall be examined for length. specified or mre than 2 yards less than the length marked on the roll ticket shall be considered a length defect. defective with respect to length or if the total of the actual
22、 lengths of rolls in the sample is less than the total of lengths marked on the roll tickets, the lot shall be rejected. During the visual examination, each roll in the sample Any length found to be less than the minimum If two or mre rolls in the sample are 3.4 Requlatorv requirements. The offeror/
23、contractor is encouraged to use recovered material in accordance with public Law 94-580 to the maximum extent practicable. 4. PACKAGING 4.1 Packaainq. The cloth shall be rolled on a convolute or spiral-wound chipboard tube. The tube shall have a smth finish surface that will prevent the fibers of th
24、e chipboard from transferring to the cloth. put-up as specified, shall be wrapped with 6O-pound minimum basis weight kraft paper in such a way that the paper encircles the roll at least once with a minimum overlap of 3 inches, and the width of the paper is sufficient to fold over and protect the end
25、s of the roll. of 2-1/2 inches shall be applied to the overlap seam the full length of the roll and across each end. polyethelene film tube and the tube secured at both ends by heat-sealing or mechanical ties. Each roll of cloth, Gumned paper tape, with a minimum width Alternatively, each roll of cl
26、oth shall be enclosed in 4.2 Packinq. fromwoven polypropylene cloth. means of a mechanical tie, or by plastic ties with a lock-end. maximum of 325 pounds of rolls of kraft-wrapped cloth shall be packed in a snug-fitting double-walled fiberboard container knm as a double cover, and shall consist of a
27、 body or joined liner and two covers. with a minimum bursting strength of 500 pounds shall be used. The container shall be strap with metallic straps not less than 1/2 by 0.020 inch or non-metallic straps not less than 7/16 by 0.030 inch. Each wrap roll shall be enclosed in a bias-sewn tubing made T
28、he tube shall be secured by heat-sealing, by Alternately, a Corrugated fiberboard 4.3 Marking. purchase order, rolls and shipping containers shall be marked in accordance with MIL-STD-129. with a 5-ply minimum cotton string or a plastic tag hanger. a reinforced eyelet and shall be legibly printed, u
29、sing water insoluble ink, with the follcwing information: In addition to any special markings required by the contract or Each roll shall have a piece ticket (identification tag) affixed The tag shall have 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IH
30、S-,-,-A-A-52105 83 I 9999974 0061681 8 A-A-52 105 Procurement Agency National Stock Mimber Item Description Contractor Width Fiber Content Contract or Purchase order Number Finish or Greige Mill Roll Mimber Lot Mimber Piece Mimber Yardage 5. NcYrEs 5.1 Acquisition rauirements. Acquisition documents
31、must specify the follawing : a. Title, number and date of this document, b. c. d. e. Type of cloth required (see 1.1). Width of cloth required (see 2.1). Color of cloth required (see 2.1). LRngth and put-up if other than specified (see 2.3). 5.2 Sources of documents. 5.2.1 Source of Goverment docume
32、nts. are available from: Copies of Military and Federal documents Standardization Documnts Order Desk Wilding 4D 700 Robbins Avenue Philadelphia, PA 19111-5094 5.3 Replacement data. Description replace types covered by MIL-C-297 as follows: The types of cloth covered by this Cannercia1 Item This CID
33、 replaces MIL-C-297 Type I - Light weight Type III - Light weight Type II - Mediumweight Type I - Medium weight Type III - Heavy weight Type II - Heavy weight MILITARY INITERJ3STS : CIVIL AQKY COORDINATING AZIrIVITY: Custodians. GSA - FSS Amry-a mvy-NU Air Force - 99 Review Activities Amry-m Navy - IC Air Force - 82 DLA - CI 5 PREPARING ACTIVITY: Army-& (Project 8305-0380) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
